1-800-663-4209 | Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
NCH-11000-Series
Low Inrush Current Enclosure Heaters Up to 65 W
Modèles en stock
- Dual Voltage 100 to 240 Vac
- UL94V-0 High Temperature Plastic Housing
- Touch Safe Heater Does Not Exceed 74°C (165°F) for Low Temperature Version/ 105°C (221°F) for High Temperature Version
- Optimized for Low Inrush Current
NCH-11000-Series
Depuis
C$
180.60
Modèles en stock
L'aperçu du produit
- Cross-Section 35.5 x 57 mm
- Enclosure Ratings IP20
- Form factor DIN Clip for 35 mm
- Frequency 50/60 Hz
- Operating Temperature, Min -30 °C
- Protection II
- Storage Temperature, Max 70 °C
- Storage Temperature, Min -40 °C
- Supply Voltage 100 to 240 Vac
- Wire Gauge 24 to 12 AWG
The NCH-11000 Series range of natural convection heaters consists of a ceramic type heating element, with electrically insulated and corrosion resistant (anodized) heat-sink fins. A UL94V-0 heater guard in high temperature plastic is provided to protect from accidental contact with the element. Elements are self-regulating giving the highest power at a low ambient temperature. There are four primary variants giving different powers. Additionally heaters are built as low and high temperature versions. Heaters NCH-11000 and NCH-11100 are low temperature versions the plastic heater guard does not exceed 74°C (165°F). Heaters NCH-11200 and NCH-11300 are hotter allowing higher power output however the plastic heater guard does not exceed a safe 105°C (221°F). The heating element conforms to IP20. For ease of installation the product is supplied with a factory fitted stainless steel 35 mm DIN-rail mounting clip. Electrical connection is via a terminal block which is integrated with the heater guard. All elements are optimized for low inrush current across the permissible voltage range.
PDF et manuels
