FMG490-Series

Magmeter w/Remote Display and Pulse & Optional 4 to 20 mA Output

0,0

(0)

Easy setup
Minimal straight pipe
Mounted or remote rate & total
Tamper-evident seal

Voir l'aperçu du produit

FMG490-Series

Depuis ^C$ 5,322.37

Modèles de boutique

Plus de variantes disponibles

Voir toutes les options de séries ci-dessous

L'aperçu du produit

Accuracy ± 0.75 %
Approvals CE
Cable Length 20 ft
Conductivity > 20 µS/cm
Display Note 128 x 64 dot-matrix LCD
Display Type LCD
Empty Pipe Detection Hardware/software, conductivity-based
Enclosure Ratings IP68, NEMA 6P
Low Flow Cutoff 0.50 %
Material Construction Option N/A
Media Compatibility Acid Solutions, Conductive Liquids, Saltwater
Number of Digits 8
Number of Outputs 1
Operating Pressure, Max 150 psi
Operating Temperature, Max 60 °C
Operating Temperature, Min -12 °C
Output Detail 4 to 20 mA
Output Pulse Rate, Max 200 pulses/sec
Process Connection Type ANSI Flange
Pulse Rate Note User-scalable from 0.1 to 99,999.9 volume units/pulse. Pulse width is one-half of pulse period with minimum pulse width of 2.5 ms, 200 pulses/sec max. For battery option meters, pulse width varies with frequency, 150 pulses/sec max
Remote Display Yes
Remote Display Cable 20 '
Storage Temperature, Max 70 °C
Storage Temperature, Min -40 °C
Velocity, Max 10 m/s

The FMG490 Series is the most economical flanged electromagnetic flowmeter on the market. With electrodes designed to discourage fouling, it is available in 3” to 12” pipe in municipal or industrial water, waste and reclaimed water, pump stations, and packaged plant applications.

Minimal straight pipe requirements allow FMG490-Series meters to be used in piping configurations where there is little space between the meter and an elbow.

FMG490 Series meters are CE certified, certified to NSF/ANSI standard 61 and are rated IP68 for applications where the meter may be operated under water to a depth of at least 10 feet (3 meters) continuously.

The display for the FMG490 is mounted remotely for ease of access. Both rate and total indication are standard. Rate and total units and pulse scaling can be set via the

front panel touch key pad by the user. Bidirectional flow reading is standard with totals available in forward, reverse, net flow, batch forward flow, and batch reverse flow. Batch and totals can be reset.

Flow Rate(3"-12")

Pipe Size (inches in diameter)	3"	4"	6"	8"	10"	12"
Max Flow Rate (Gallons/Minute)	723	1285	2891	5140	8031	11565
Cut-off (min) Flow Rate (Gallons/Minute)	3.62	6.43	14.46	25.70	40.15	57.82
Max Flow Rate (Litres/Second)	46	81	182	324	507	730
Cut-off (min) Flow Rate (Litres/Second)	0.23	0.41	0.91	1.62	2.54	3.65
Max Flow Velocity (Meters/Second)	10	10	10	10	10	10