Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
FMA-A2310
Mass Flowmeters and Controllers With Or Without Integral Display
Choisissez une variante
Ajouté à votre panier
Configuration terminée.
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Échec de l'enregistrement des configurations, cliquez sur le bouton Configurer Recommencer
Spécifications du produit
<< Voir toutes les modèles de produits| Brand |
 |
| Accuracy | ± 1 % |
| Accuracy Note | ± 1% of full scale including linearity |
| Additional Features 1 | Power Supply Included |
| Calibration | NIST 5-Point Certificate |
| Display Type | LCD |
| Electrical Connection | Sub-D Male Miniature Connector |
| Electrical Output | 4 to 20 mA, 0 to 5 Vdc |
| Height | 6.05 in |
| Leak Rate Under Vacuum | less than 10^⁻⁶ cc He/s |
| Length | 3.8 in |
| Materials, Wetted | FEP, FKM |
| Media Compatibility | Air, Gases, Nitrogen, Oxygen |
| Mounting Thread | Self Tap #4 |
| Operating Pressure, Max | 250 psi |
| Operating Pressure, Min | 0 psi |
| Operating Temperature, Max | 50 °C |
| Operating Temperature, Min | 0 °C |
| Output Detail | Linear 0 to 5 Vdc, 1000 Ω min load, 4 to 20 mA, 500 Ω loop resistance |
| Output Signal | Current, Voltage |
| Pressure Coefficient | 0.01% FS/psi |
| Process Connection Size | 1/4 in |
| Process Connection Type | NPT Female |
| Repeatability | ± 0.15% |
| Required Pressure, Min | 1 psi |
| Response Time | 5 sec |
| Supply Current | 150 mA |
| Supply Power Note | 24 Vdc @ 150 mA, 115 Vac, 220 Vac with AC adaptor |
| Supply Voltage | 24 Vdc |
| Temperature Coefficient | 0.05% FS/°C |
| Turndown Ratio | 100:1 |
| Volumetric Flow Rate, Max | 15 SLM |
| Volumetric Flow Rate, Min | 0.01 SCCM |
| Weight | 2.75 lb |
| Width | 1.5 in |
| Voir toutes Spécs | |
PDF et manuels
Afficher les notes et les avis
Rated 5 out of
5
by
Tractor burn from
Great for QC or R&D
This is our 2nd flow meter of this style. The readings from old one match the new one. Good gage repeatability. Works great for checking air pumps. The display is good when you don't want hook up the analog output. Just keep the water drops away and make sure that you warm it up for 5 minutes.
Date published: 2016-10-04
Rated 5 out of
5
by
Paul M from
Controls and Electrical Engineer
It is a nice unit and preforms as described the calibration and accuracy, are spot on.
Date published: 2023-08-24
Rated 5 out of
5
by
AdrianG from
Omega FMA-A2300
Very accurate equipment, practical and easy to use
Date published: 2023-07-28
Rated 5 out of
5
by
Chris Heilner from
Reliable Instrument
Reliable instrument. Easy to use.
Good value too. Great customer service.
Date published: 2023-04-29
Rated 5 out of
5
by
Anonymous from
We use these with leak test decay test fixtures
Works very well, and comes calibrated ready to use
Date published: 2022-11-03
Rated 5 out of
5
by
Pouya from
This Mass Flowmeters works as descibed
Simple to connect. Reliable reading. Recommend it for simple applications.
Date published: 2020-04-06