Skip to search Skip to main content Skip to navigation

Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici

Nous avons remarqué que vous veniez de . Visitez votre site local pour connaître les offres régionales et l'assistance en direct.

OMB-DAQ-2416-4AO

High Performance Multi-Function I/O USB Data Acquisition Modules

C$2,713.20

Article# OMB-DAQ-2416-4AO

Remises de volume disponibles
Calendrier de remise sur volume
Quantité Prix unitaire
1-4 C$2,713.20
5-9 C$2,577.54
10-24 C$2,523.28
25-49 C$2,414.75
50-99 C$2,360.48
100+ C$2,306.22

En stock

Délai de livraison (si pas en stock): 36 semaines

Spécifications du produit

<< Voir toutes les modèles de produits
Brand
Accuracy ± 0.025
Analog I/O Note Analog Input Note: A/D CONVERTER;(OMB-DAQ-2416, OMB-DAQ-2416-4AO);A/D Converter Type: 24-bit sigma delta;A/D Data Rates:3750 samples/sec (S/s), 2000 S/s, 1000 S/s, 500 S/s, 100 S/s, 60 S/s, 50 S/s, 25 S/s, 10 S/s, 5 S/s, 2.5 S/s;Input Isolation: 500 Vdc min between field wiring and USB interface;Common Mode Rejection: Thermocouple mode, 110 dB; voltage mode, 90 dB;;ANALOG INPUTS;(OMB-DAQ-2416, OMB-DAQ-2416-4AO, OMB-AI-EXP32);Number of Channels: 16 differential/32 single-ended (thermocouples require differential mode) on OMB-DAQ-2416 or OMB-DAQ-2416-4AO. The OMB-AI-EXP32 is a multiplexer-based channel expansion module that adds an additional 16 differential/32 single ended channels.;Maximum Input Voltage: ±30V (power on), ±10V (power off);Input Impedance: 2 GΩ (power on), 390 Ω (power off);Input Leakage Current: ±10.6 nA (OMB-DAQ-2416, OMB-DAQ-2416-AO); ±20 nA (OMB-AI-EXP32); ±1µA max for input voltage >±30 V;Input Capacitance: 590 pF;Crosstalk: 100 dB adjacent channels;Channel Gain Queue: Up to 64 elements, software configurable channel and range;Warm-Up Time: 45 minutes max (OMB-DAQ-2416, OMB-DAQ-2416-4AO); 15 minutes max (OMB-AI-EXP32);Open Thermocouple Detect: Automatically enable when a channel is configured for a thermocouple sensor.;CJC Sensor Accuracy: ±0.15°C typical (15 to 35°C); ±0.5°C max (0 to 55°C);
Bandwidth 1 MHz
Breakdown Voltage Drain to Source: 50 V
CMRR Thermocouple Mode: 110 dB, Voltage Mode : 90 dB
Configuration Parameters Pull-Up/Down Configuration, User-Configurable Input/Output
Data Interface Ethernet, USB 1.1, USB 2.0
Data Interface Note Output Configuration: Digital: Each DIO bit can be independently read from (DIN) or written to (DOUT). DIN bits can be read at any time whether the DOUT is active or tri-stated.
Digital I/O Note DIGITAL INPUTS Number of Digital I/O Channels: 8 (OMB-DAQ-2416, OMB-DAQ-2416-4AO); 16 (OMB-AI-EXP32) Configuration: Each DIO bit can be independently read from (DIN) or written to (DOUT). The DIN bits can be read at any time whether the DOUT is active or tri-stated. Voltage Range: 0 to 15 Vdc Type: CMOS (Schmitt trigger) Characteristics: 47 kΩ pull-up/pulldown resistor, 28 kΩ series resistor Maximum Input Voltage Range: 0 to 20 Vdc max (power on/off, relative to DGND) Pull-Up/Pull-Down Configuration: All pins pulled up to 5V via individual 47 kΩ resistors (default configuration); pull-down capability is available by moving internal jumper Transfer Rate (Software Paced): 500 port reads or single bit reads per second typical Input High Voltage: 1.3V min, 2.2V max Input Low Voltage: 1.5V max, 0.6V min Schmitt Trigger Hysteresis: 0.4V min, 1.2V max "DIGITAL OUTPUTS (OMB-DAQ-2416, OMB-DAQ-2416-4AO, OMB-AI-EXP32) Number of Digital I/O Channels: 8 (OMB-DAQ-2416, OMB-DAQ-2416-4AO); 16 (OMB-AI-EXP32) Configuration: Each DIO bit can be independently read from (DIN) or written to (DOUT). The DIN bits can be read at any time whether the DOUT is active or tri-stated. Characteristics: 47 kΩ pull-up, open drain DMOS transistor Pull-Up Configuration: All pins pulled up to 5V via individual 47 kΩ resistors by default Transfer Rate (Software Paced): 500 port writes or single bit writes per second typical Output Voltage Range: 0 to 5V (no external pull-up resistor, internal 47 kΩ resistors connected to 5V by default); 0 to 15V max Drain to Source Breakdown Voltage: 50V min Off-State Leakage Current: 0.1 µA Sink Current Capability: 150 mA max continuous per output pin; 150 mA max continuous for all eight channels DMOS Transistor On-Resistance (Drain to Source): 4 Ω";Transfer Rate: Digital: 500 port reads or single bit reads per second typ, Counter: System dependent, 500 reads or writes per second;Sink Current: 150 mA
Digital Input Digital: Low = 0 Vdc
Digital Output ±3.5 mA maximum
Electrical Connection Removable Screw Terminal
Electrical Output 0 to 5 Vdc
Height 50 mm
Impedance Input 2 GΩ (power on), 390 Ω (power off)
Input Capacitance Analog: 590 pf, Counter: 25 pf
Input Configuration Connected Software
Input Type Thermocouple, Voltage
Input Voltage Note Absolute Maximum Input Voltage: Analog: ±30V (Power On), ±10V (Power Off), Digital: 0 to 20 Vdc max (power On/Off, relative to DGND), Counter: ±20V max (Power On/Off)
Isolation 500 Vdc Minimum between field Wiring and USB Interface
Leakage Current ±120 nA
Length 245 mm
Memory EEPROM
Microcontroller One high-performance 8-bit RISC microcontroller with USB interface (non-isolated); one high‑performance 16-bit RISC microcontroller for measurements (isolated)
Number of Channels, Input Analog: 32 SE/16 DIFF, Digital: 8, Counter: 2
Number of Channels, Output Digital: 8, Analog: 4
Operating Temperature, Max 50 °C
Operating Temperature, Min 0 °C
Output Noise Output: 30 µVrms
Output Resolution Analog: 16-bits
Output Settling Time 45 μs
Output Signal Digital, Voltage
Relative Humidity 0 to 90% RH non-condensing
Sampling Rate 1 kHz (1,000 updates/second)
Sampling Rate Note Single channel, 1000 S/s (max, system dependent); multiple channels, 1000 S/s divided by the number of channels (max, system dependent)
Slew Rate 1.0 V/μs
Storage Temperature, Max 85 °C
Storage Temperature, Min -40 °C
Supply Current 340 mA
Supply Power Note Power: 5V ±5%, 340 mA supplied by included AC adaptor (OMB-DAQ-2416-ADAP), User Output Voltage: 5V, 10 mA max available (pin 35), Isolation: 500 Vdc min measurement system to PC
Supply Voltage 5 Vdc
USB Cable Length 5 m
Voltage Measurement Range ±0.20, ±10V, ±5V, ±2.5V, ±1.25V, ±0.625V, ±0.3125V, ±0.15625V, ±0.078125V
Voltage Output ±10 Vdc
Warm Up Time 45 min
Weight 463 g
Width 146 mm
Wire Gauge 30 to 16 AWG
Voir toutes Spécs Montrer moins
High Performance Multi-Function I/O USB Data Acquisition Modules OMB-DAQ-2416-4AO OMB-DAQ-2416-4AO
Rated 4 out of 5 by from delivery the product is ok, but the delivery time is too long. Moreover, processing is also slow.
Date published: 2021-06-06
  • y_2025, m_2, d_22, h_8
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_CA, sid_OMB-DAQ-2416-4AO, prod, sort_[SortEntry(order=HELPFULNESS, direction=DESCENDING), SortEntry(order=POSITIVE_FEEDBACK, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_omega
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 3ms
  • REVIEWS, PRODUCT
fr-CA
fr
Enregistrer la configuration