AM-2250

Multi-Variable Controller - pH, ORP, Contacting Conductivity, Flow

0,0

(0)

Multi-Variable Controller - pH, ORP, Contacting Conductivity, Flow

Cliquez et maintenez pour zoomer

Choisissez une variante

Supply Voltage

120/240 Vac

Electrical Output

4 to 20 mA

Relay Output

Dry contact relay

Voir toutes les modèles Voir tous les accessoires

C$1,649.13

Article# AM-2250

Qté

Ajouté à votre panier

En stock

Délai de livraison (si pas en stock): 6 semaines

Ajouter à la liste des projets

Voir Les Spécifications

Spécifications du produit

<< Voir toutes les modèles de produits

Brand
Additional Features 1	PID Control, Sensors Sold Separately
Calibration Note	pH Calibration modes: Automatic or Manual 2 or 3 points; ORP Calibration modes: Manual 1 point; Conductivity Calibration modes: Up to 16 points; Flow Calibration modes: K factor input
Compliance	ETL
Compliance Note	ETL (US and Canada) and CE pending
Conductivity Measurement	0.055 to 500,000 µS/cm
Cutout Dimensions	5.4 x 5.4 in
Display Type	LCD
Electrical Output	4 to 20 mA
Enclosure Ratings	NEMA Type 4X
Flow Indication Note	0 to 999 in any units
Height	5.5 in
Input Range Note	pH Sensor Input: -600 to +600 mV; ORP Sensor Input: -999 to +999 mV; Conductivity Sensor Input: 0 to 9999 Ω; Flow Sensor Input: 0 to 2000 Hz
Length	5 in
Mounting Orientation	Panel Mount, Wall Mount
Number of Relays	3
ORP Measurement Range	-1000 to +1000 mV
Operating Humidity	0 to 90% RH
Operating Temperature, Max	120 °C
Operating Temperature, Min	-20 °C
Output Detail	Two 4-20 mA outputs, Scalable 4-20mA with PID (Process), Scalable 4-20mA (Process or Temperature), Optically isolated. Max Load - 800 Ω
PH Measurement Range	0 to 14.00 pH
Power Consumption	0.2 A @ 115 Vac or 15 W
Process Temperature, Max	-20 °C
Process Temperature, Min	70 °C
Relay Note	3 Dry contact relay with snubber circuit, 10A @ 120/240 VAC or 8A @ 30 VDC (Resistive Load), 5A @ 120/240 VAC or 4A @30 VDC (Inductive load) Relay Modes: Rising/Falling/In Range. Options: Relay Delay, Cycle, Overfeed Timer, Override, One relay can be triggered by temperature or flow totalizer.
Relay Output	Dry contact relay
Sensing Element	100/1000 Ω RTD, 300/3K Ω NTC or none
Sensing Element Note	PH, ORP, Conductivity: 100, 1000 Ω, RTD 300, 3K Ω NTC or none
Sensor Type Note	pH Sensor: 6-Wire Differential or Combination; ORP Sensor: 6-Wire Differential or Combination; Conductivity Sensor: 4-Wire contacting : Any cell constant between 0.01 and 100; Flow Sensor: Pulse output: Paddle-wheel, Magmete
Supply Voltage	120/240 Vac
Temperature Compensation	Automatic: pH ;Automatic or Manual: Conductivity ;Display temperature: ORP ;Display Flow Totalizer: Flow
Temperature Measurement Note	pH, ORP, Conductivity : -20 to 120 °C, Flow : Flow Totalizer 0 to 999 in any units
Weight	2 lb
Width	5.5 in
Voir toutes Spécs Montrer moins