Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
BV1000TRN025B
Turbine Flow Meter, 0.026 to 0.65 GPM, Trogamid, 1/4" NPT, 1M Cable
Ajouté à votre panier
Configuration terminée.
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Échec de l'enregistrement des configurations, cliquez sur le bouton Configurer Recommencer
Spécifications du produit
<< Voir toutes les modèles de produits| Brand |
 |
| Accuracy | ± 3 % |
| Approvals | KTW, W270, FDA - 21 CFR 175.300 |
| Burst Pressure | 2900 psi Maximum |
| Electrical Connection | Cable |
| Electrical Output | Amplified Square Wave |
| Filter | 20 to 40 microns Recommended |
| K-Factor | 83270 pulses/gal |
| Materials, Wetted | Graphite, PA12 Ferrite, PA12 Trogemid, PTFE |
| Media Compatibility | Liquids |
| Operating Pressure, Max | 360 psi |
| Operating Temperature, Max | 100 °C |
| Operating Temperature, Min | -20 °C |
| Output Detail | Max. 20 mA (Pull-up resistor required. See wiring diagram in User Manual.), Output (Hz): NPN sinking open collector |
| Output Signal | DC Pulse |
| Pipe Size, Max | 5 in |
| Pressure Drop Note | 3.63 psi Pressure Drop ∆p with Water Flow at 68° F (20°C) |
| Pressure Drop, Max | 3.63 psi |
| Process Connection Size | 1/4 in |
| Process Connection Type | NPT Male |
| Repeatability | <0.50% |
| Repeatability Note | <0.50% under the same operating conditions |
| Supply Current | 8 mA |
| Supply Voltage | 5 to 24 Vdc |
| Viscosity Range | 0 to 16 cSt |
| Volumetric Flow Rate, Max | 2.5 l/min |
| Volumetric Flow Rate, Min | 0.1 l/min |
| Weight | 10 g |
| Voir toutes Spécs | |
PDF et manuels
Afficher les notes et les avis
Rated 5 out of
5
by
Michael Minicozzi from
Turbine Flow Meter, 0.26 to 6.6 GPM, Trogamid, 3/8
I have used multiple iterations of these flow meters are they are reliable and easy to configure for our needs.
Date published: 2022-08-05
Rated 5 out of
5
by
Anonymous from
1/4 inch flow meter
Flow meter works great much better than the previous model pull up resistance is easy to get right
Date published: 2022-03-11
Rated 5 out of
5
by
Samanvith from
As described. Good product
Has been working well and will be ordering more of these
Date published: 2023-11-27
Rated 5 out of
5
by
The extrusion guy from
Excellent little meter for low-flow applications.
A compact, well made, and very precise device. Wiring it up took about 15 minutes, and it integrates easily into any device that can measure square-wave frequency or count pulses. Very satisfied with the devices precision.
Date published: 2023-05-08
Rated 2 out of
5
by
TestEngineer2 from
Not Plug & Play
I purchased this sensor under the assumption that I could connect in to my OMB-DAQ-2408 and read the frequency of pulses through DAQami. Although DAQami supports frequency on counter channels, this feature wasn't available for my device. After spending 10hrs screwing about and downloading DASYlab, I called customer support. They recommended I buy a 500$ signal conditioner. Reminder-- This 125$ sensor also needs an external pull up resistor because it would've been too expensive to integrate inside the device. I understand that Omega does not create these devices or any of the software but it was a very frustrating experience that could've been avoided with a better shop page.
Date published: 2023-01-30
Rated 3 out of
5
by
Anonymous from
Product Ethanol Compatibility
it is good with water but not compatible with ethanol
Date published: 2023-01-20