Skip to search Skip to main content Skip to navigation

Contact

Omega Link M12 Modular Smart Probe Analog Process interface with I/O

Cliquez et maintenez pour zoomer

SP-014-Series

Omega Link M12 Modular Smart Probe Analog Process interface with I/O

0,0

(0)

Modèles en stock

Up to 3x Current Loop (0-24mA) or
Up to 3x mV (0-1.0 _VDC)
2x Digital I/O
Software configurable through SYNC configuration software

Voir l'aperçu du produit

SP-014-Series

Depuis ^C$ 226.47

Modèles en stock

Modèles de boutique

1 variantes disponibles

Voir toutes les options de séries ci-dessous

Fiche technique

L'aperçu du produit

Approvals CE, UKCA
Configuration Configurable via Omega Link Smart Interface and SYNC configuration software
Digital Input VinHighThreshold = 2.2 VMAX, VinLowThreshold = 0.3 VMIN, VinMAX = 30 VDC
Digital Output 2x Open Drain 100 mA max, VMAX = 30 VDC
Enclosure Ratings IP67
Input Control Signal Current Loop: 4 to 20 mA, Voltage: 0 to 1.0 Vdc, 0 to 2.0 Vdc
Input Note ON: 1.0 Vdc, OFF: 0.7 Vdc, Internal Pull Up/Down: 1.5k to 3.0 Vdc, Comparator (Pulse) Input: 100 mV, 500 mV, 1.0 Vdc, 2.0 Vdc
Length 96.7 mm
Number of Channels 3
Number of I/O 2
Operating Temperature, Max 85 °C
Operating Temperature, Min -40 °C
Software Compatible with OEG, SYNC, and OMEGA Cloud
Supply Power Type DC
Supply Voltage 2.8 to 3.3 Vdc
Width 22.1 mm

The Omega Link SP-014 Process Monitoring Smart Probe provides an easy way to integrate process signals to your Omega Link Ecosystem. The SP-014 accepts standard process signals through its M12 5-pin connector and Omega Link Smart Interfaces through its M12 8-pin connector. The optional M12.5-S- M-FM connector can be utilized to easily connect wire leads to your SP-014.

Each of the 3 process inputs may be independently configured as 0-24 mA or 0-1.0 V_DC inputs.

Intuitive Configuration

Configure your Omega Link Smart Probe using SYNC’s intuitive configuration interface.

Edge Control and Built in I/O

The Omega Link SP-014 features 2 configurable digital I/O pins. These can be used for a myriad of applications including driving relays, physical alarms, or sensing dry contacts like door switches. The SP-014 can also be utilized as an edge controller, with autonomous independent decision-making capabilities to generate local alarms or provide control outputs based on sensor inputs.

Smart Core Enabled

Smart core is integral to all Omega Link Smart Probes. This powerful suite of advanced features enable plug and play connectivity, alarms and notifications, data assurance, data logging, and storage.

Smart Interface Modularity

Customize your Omega Link Ecosystem with modular Smart Interfaces that connect and transmit data from your Smart Probe to the Omega Link Cloud.

Your Data at a Glance with Omega Link Cloud

Omega Link Cloud consolidates and brings your data to you when you need it, wherever you are. The intuitive cloud interface allows you to monitor and store your data, set alarms and alerts, and provides insights on device activity. Visit the OMEGA website for more details.

Specifications

INPUT POWER

Voltage: 2.8 _VDC - 3.3 _VDC

DIO DIGITAL INPUTS

V_{inHighThreshold}= 2.2 V_MAX
V_{inLowThreshold}= 0.3 V_MIN
V_inMAX= 30 V_DC

DIO DIGITAL OUTPUTS

2x Open Drain 100 mA max
V_MAX= 30 V_DC

ENVIRONMENTAL

Operating Temperature: -40 to 85℃ (-40 to 185℉)
Rating: IP67 when mated

MECHANICAL

Dimensions: 22.1 mm W x 96.7 mm L (0.87” x 3.80”) not including mounting tabs

GENERAL

Agency Approvals: CE, EMC 2014/30/EU, LVD 2014/35/EU
Compatibility: Compatible with OEG, SYNC configuration software, Omega Link Cloud, and Modbus Networks

M12 5-Pin Wiring

Pin	mA	mV
Pin 1	3.3V Power
Pin 2	Input 0	Input 0
Pin 3	GND
Pin 4	Input 1	Input 1
Pin 5	Input 2	Input 2

M12 8-Pin Wiring

Pin	Name	Function
Pin 1	DIO 0	Discrete I/O Signal 0
Pin 2	INTR	Interrupt Signal
Pin 3	SCL	I2C Clock Signal
Pin 4	SDA	I2C Data Signal
Pin 5	Shield	Shield Ground
Pin 6	DIO 1	Discrete I/O Signal 1
Pin 7	GND	Power Ground
Pin 8	3.3VDD	Power Supply

Omega Link SP-014

Model Number	Description
SP-014-1	Process Monitoring Smart Probe with discrete I/O

Omega Link Smart Interface

Omega Link Smart Probes require an Omega Link Smart Interface to operate and connect to your Omega Link Ecosystem

Model Number	Description
IF-001	USB Smart Interface
IF-002	RS485/Modbus Smart Interface

Accessories

An optional M12 5-pin screw terminal adapter is available for users who wish to connect wire leads directly to the SP-014.

Model Number	Description
M12.5-S-M-FM	M12 5-pin screw terminal adapter
M12.8-T-SPLIT	Smart Probe M12-8 pin shielded T-Splitter - enables access to I/O pins
M12.8-S-M-FM	M12-8 pin Straight Plug Field install connector with screw terminals
DM12CAB-8-1-RA	1m (3.3’) cable dual M12-8 connector, right angle terminator
DM12CAB-8-3-RA	3m (9.8’) cable dual M12-8 connector, right angle terminator
DM12CAB-8-5-RA	5m (16.4’) cable dual M12-8 connector, right angle terminator
DM12CAB-8-1	1m (3.3’) cable dual M12-8 straight connector
DM12CAB-8-3	3m (9.8’) cable dual M12-8 straight connector
DM12CAB-8-5	5m (16.4’) cable dual M12-8 straight connector