Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
PST020A
Thermocouple Wire Stripper for OMEGACLAD™ Wire
Remises de volume disponibles
Calendrier de remise sur volume
| Quantité | Prix unitaire |
|---|---|
| 1-9 | C$239.72 |
| 10-24 | C$227.73 |
| 25-99 | C$215.75 |
| 100-499 | C$203.76 |
| 500-999 | C$191.78 |
| 1000+ | C$179.79 |
Ajouté à votre panier
Configuration terminée.
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Échec de l'enregistrement des configurations, cliquez sur le bouton Configurer Recommencer
Spécifications du produit
<< Voir toutes les modèles de produits| Brand |
 |
| Accuracy | ± 5 % |
| Accuracy Note | 0.019" to 0.021" |
| Insulation | MgO |
| Power Adaptor Size | Small |
| Replacement Tool Kit | TB125 |
| Rotational Speed | Hand |
| Sheath Outer Diameter | 0.02 in |
| Weight | 28 g |
| Voir toutes Spécs | |
PDF et manuels
Afficher les notes et les avis
Rated 5 out of
5
by
Anonymous from
Works Great
Bought 3 of them a few months ago and after doing a little adjusting of the cutter it works great.
Date published: 2019-06-16
Rated 1 out of
5
by
JEK20 from
Could not get it work
I bought two PST020A thermocouple wire strippers and they did not work. I followed the directions and tried everything I could think of but they simply did not work. I would say you're better off to order a custom 0.020" diameter thermocouple with the sheathing stripped than to try and use this wire stripper.
Date published: 2016-06-13
Rated 5 out of
5
by
Mike ST from
Excellent Tool. Would buy again.
Very well made tool. The ratcheting gear teeth are very fine mesh and it is very easy to crimp even the largest brass fittings. The handle grip is very comfortable. I highly recommend this crimper tool.
Date published: 2023-02-27
Rated 5 out of
5
by
CooperLab from
Very nice tool
Purchased this to strip the sheath from Mineral Insulated Cable (304-K-MO-062-DUAL-SLE). The stripper works very well and efficiently with a little bit of adjustment. There is a set screw which allows you to adjust the position of the cutting tool. Initially the tool was too close to the center, which caused the stripper to cut through the the sheath, insulation, and thermocouple wire. Actually that setting worked pretty well for cleaning up the cable after being cut to length with side cutters. Then after adjusting the tool back a bit, so that it only removed the outer sheath, it worked perfectly to strip the sheath. I used it in a power drill with around 300 rpm with light to moderate pressure, with the mineral cable claimed in a vice with soft jaws.
Overall a very nice tool, and pretty much the only way to efficiently and cleanly strip mineral insulated cable.
Date published: 2020-11-07