Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
CT5100
1 or 2 Channel, 10" Circular Chart Recorders
Choisissez une variante
Recording Color
Material Construction Option
Remises de volume disponibles
Calendrier de remise sur volume
| Quantité | Prix unitaire |
|---|---|
| 1-4 | C$2,979.31 |
| 5-9 | C$2,830.34 |
| 10-24 | C$2,770.76 |
| 25-49 | C$2,651.59 |
| 50-99 | C$2,592.00 |
| 100+ | C$2,532.41 |
Ajouté à votre panier
Configuration terminée.
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Échec de l'enregistrement des configurations, cliquez sur le bouton Configurer Recommencer
Spécifications du produit
<< Voir toutes les modèles de produits| Brand |
 |
| Accuracy | ± 0.5 % |
| Accuracy Note | Chart Recording: 0.5% of chart span reference accuracy, Chart Rotation: ±0.5% of rotation time, assuming all backlash removed, Chart Rotation: ±0.5%, Chart Speed: ±1% |
| Approvals | UL, FM |
| Approvals Note | Safety: UL Approved for USA:UL 1092, UL 916 and QUXY, pending UL Certified for Canada:CSA Spec 142, pending Limit/Device: FM, pending |
| CMRR | >120 dB @ 50/60 Hz, 260 Vac max |
| Chart Diameter | 254 mm |
| Chart Note | Chart Span: Bottom and top of span, -9999 to 9999 units; Chart Drive: DC Stepper Motor; Chart Drive: Stepper Motor |
| Chart Speed | 8 Hours to 7 Days |
| Cold Junction Compensation | 0.04°/°C deviation from 25°C |
| Conduit Entrance | 3 Openings on the Right Side |
| Current Measurement Range | 0 to 20 mA |
| Cutout Dimensions | 322.58 x 322.58 mm |
| Data protection | EEPROM Storage |
| Display Note | 4-digit, 14 mm H (0.56"), red, 7-segment, LED display, Display Modes: Normal: process value(s) or blank Keypad: 3 keys for programming and unit operation |
| Display Type | LED |
| Enclosure Ratings | IP54, NEMA Type 3 |
| Height | 355.6 mm |
| Impedance Input | >100 MΩ for T/C and mV inputs, 100 kΩ for 5 V inputs, 4.7 Ω for µA inputs |
| Input Note | Input Correction: Offset adjustment: 999 to 999 units;Input Isolation: 350 Vac, 500 Vdc |
| LED Indicators | 5 Red LED Alarm Status Indicators, 1 green LED pen 2 indicator |
| Length | 96.5 mm |
| Material Construction Option | Standard |
| Materials | Noryl, Acrylic |
| Measurement Range Note | Thermocouple: J: 0 to 760°C, K: 0 to 1360°C, T: -200 to 400°C, R: 200 to 1650°C, S: 200 to 1650°C RTD: -140 to 400°C Current: 0 to 20 mA, 4 to 20 mA Voltage: 0 to 25 mV, 0 to 50 mV, 10 to 50 mV, 0 to 5 V, 1 to 5 V |
| Measurement Type | Thermocouple, RTD, Current, Voltage |
| Mounting | Panel Mount or Wall Mounting |
| NMRR | 85 db @ 60 Hz or greater |
| Number of Channels | 1 |
| Number of Relays | N/A |
| Operating Environment | Reference Operating Condition: 25 °C |
| Operating Temperature, Max | 50 °C |
| Operating Temperature, Min | 0 °C |
| Panel Depth | 64 mm |
| Panel Protrusion | 33 mm |
| Pen Type | Disposable Fiber tip |
| Power Consumption | 18 VA |
| RTD Type | 100 Ω Pt sensor; α= 0.00385 |
| Recording Color | Pen 1: Red |
| Relative Humidity | 10 to 90% RH, non-condensing |
| Sampling Rate | 1 Scan per second for Non-RTD inputs; 1 Scan per 1.2 seconds for RTD inputs |
| Sensor Break Detection | Sensor Fault Detection: Display goes to “SnSr” and pen goes up-scale if a sensor break is detected. No sensor break can be detected for zero-based volt and milliamp ranges. Display goes to “Hi” 10% above span; display goes to “Lo” 10% below span or zero, whichever is higher. |
| Sensor Input Configuration | 150 µA |
| Standard Limits of Error | Error Limit: Cold-Junction Compensation Error: ±0.2°C @ 25°C, Linearization Error: T/Cs: ±0.25°C typical, ±0.5°C worst case , RTDs: ±0.1°C typical, ±0.3°C worst case, Ambient Temperature Error: ±0.01% of span per °C deviation from 25°C; Measurement Error: Type J, K, T, R, S and RTD: ±0.25% of span ±1 degree; mA, mV and Vdc: ±0.25% of scaled span plus 1 leastsignificant digit |
| Storage Temperature, Max | 65 °C |
| Storage Temperature, Min | -40 °C |
| Supply Power Note | Line Voltage: 90/264 Vac, 50/60 Hz; optional: 20 to 50 Vac, 50/60 Hz, or 22 to 65 Vdc |
| Supply Power Type | AC |
| Supply Voltage | 90 to 264 Vac |
| Switch Rating | 5 A @ 115 Vac |
| Switch Rating Note | Relays: SPDT; contacts rated 5 A resistive @ 115 Vac,2.5 A resistive @ 230 Vac, 1⁄8 hp @ 230 Vac (single phase),250 VA @ 115/230 Vac |
| Switch Type | SPDT NO/NC, Selectable |
| Temperature Measurement Range | J: 0 to 760°C, K: 0 to 1360°C, T: -200 to 400°C, R: 200 to 1650°C, S: 200 to 1650°C, RTD: -140 to 400°C |
| Thermocouple Type | J, K, T, R, S |
| Voltage Measurement Range | 0 to 25 mV, 0 to 50 mV, 10 to 50 mV, 0 to 5 V, 1 to 5 V |
| Weight | 8.8 kg |
| Width | 355.6 mm |
| Wire Code Option | 2- or 3- Wire |
| Voir toutes Spécs | |
PDF et manuels
Afficher les notes et les avis
Rated 4 out of
5
by
FRANK RENTERIA from
USER FRIENDLY
WE HAVE HAD THESE FOR A FEW YEARS . TWELVE OF THEM THROUGH OUT THE PLANT
THEY HAVE WARE AND TEAR, SO WE NEED A PART BREAK DOWN AND SERVICE MANUEL .I AM TOLD THEY IS NONE. WHY?
Date published: 2017-07-31