Indicateur de température avec alarme ou commande marche/arrêt et avertisseur sonoreDP7000-seriesDP7000-series
L'aperçu du produit
Accuracy
± 1 %
Alloy Material (-)
Alumel
Alloy Material (+)
Chromel
Control Type
On/Off
Display Note
Three 12.7 mm (1/2") red digits, plus sign; update rate: 1, 2, 4 or 8 sec (adjustable)
Display Size
12.7 mm (0.50 in)
Display Type
3 Digit LED
Enclosure Ratings
IP64, NEMA Type 4X
Form factor
2.79 in x 1.14 in
Horsepower Rating
1 hp
Measurement Type
Temperature
Memory Backup
Non-Volatile
Number of Inputs
1
Operating Temperature, Max
70 °C
Operating Temperature, Min
0 °C
Power Consumption
4 VA
Relay Output
16 A SPDT
Relay Output Note
16 A SPDT @ 240 Vac
Resolution
1°
Samples,Max
1 Hz
Storage Temperature, Max
80 °C
Storage Temperature, Min
-20 °C
Supply Power Note
115 Vac, 230 Vac, 12 Vac/Vdc or 24 Vac/Vdc (depending on model)
Temperature Measurement Range
J: 0 to 999°C, K: 0 to 999°C
Temperature Sensor Type
Thermocouple
Thermocouple Type
J, K
Weight
65 g
Description
La série DP7000 d'indicateurs de température offre une large gamme de température, 2 réglages d'alarme sélectives, et un avertisseur sonore qui indique une condition d'alarme ou une erreur. L'utilisateur peut désigner le point de consigne, la régulation du chauffage et refroidissement avec commande marche/arrêt, la configuration de l'alarme, l'état de charge, et l'ajustement de la sonde d'ambiance. En outre, le DP7000 comporte une protection par mot de passe et des messages d'erreur/alarme. La température et l'état des sorties sont indiqués sur l'affichage DEL rouge. Le DP7000 peut être programmé à des entrées thermocouples J ou K.
APPLICATIONS Ces indicateurs sont destinés aux refroidisseurs industriels, chambres climatiques, congélateurs-chambres et réfrigérateurs-chambres, thermoscelleuses, stérilisateurs, chambres froides, vitrines, stockage de viande et de marchandise, et chambres de combustion.
Rated 5 out of
5 by
april from
Shipped quickly .easy to purchase and came correctShipped quickly . easy to purchase and came correct.
Date published: 2022-02-15
Rated 1 out of
5 by
Wade at Waters from
Not WorkingRight out of the box, this looks used. The instructions and label on the device are soiled, and looked like they got wet or heated.... Very disappointed.. I need one of these yesterday...
Date published: 2019-11-06
Rated 1 out of
5 by
Kevin100 from
I purchased two of these and neither worked.No LED display on power up. And Omega doesn't allow returns.
Date published: 2020-03-21
Rated 5 out of
5 by
Dions Pizza from
Replacement ThermostatsWe have been using these in place of the mechanical t-stats on Garland ovens for years
Does the alarm always sound, or can you set it below the heater element setpoint?
Asked by: StephenC
The buzzer will go off when the measured temperature is above or below your alarm setpoint depending on how the Controller is programmed. In normal control mode the alarm would not buzz.
Answered by: ApplicationEngineerANB
Date published: 2024-07-12
This just monitors the oven it does not control the setting,correct?
Asked by: Jim99
Thank you for your application. This unit has the ability to be an alarm monitor or ON/OFF control device.
Answered by: Application Engineer CB
Date published: 2022-03-11
Does it come certified/calibrated with a cert?
Asked by: Jim99
Thank you for your inquiry. Unfortunately this product does not come with a certified calibration.
Answered by: Application Engineer CB
Date published: 2022-03-11
What is the thermocouple connection? stripped Leads or connector?
Asked by: Han67
The DP7000 series connections are made by screw terminals - no connectors.
Answered by: ApplicationEngineerANB
Date published: 2024-07-22
What panel size cutout is needed for this meter? Is there a standard punch that can be used?
Asked by: franktec
Thank you for your inquiry. The panel cutout for this instrument is 2.80 x 1.14 Inches (71 x 29 mm). There is no standard punch available.