Thermomètres Enregistreur à deux entrées. RS232 ou USB{USB}{RS232}{WINXP}HH506A-HH506RAHH506A-HH506RA
L'aperçu du produit
Additional Features 1
MIN/MAX/REL/Auto Power-Off/HOLD Functions
Display Type
LCD
Display Type Note
Backlight LCD, 19999 Digits
Form factor
Handheld
Height
53 mm
Length
192 mm
Measurement Type
Temperature
Number of Measurements
2
Operating Time
Real Time
Samples,Max
1024
Temperature Accuracy
± 0.3 °C (± 0.54 °F)
Temperature Accuracy Note
± (0.05% rdg + 0.3°C)
Temperature Measurement, Max
1767 °C
Temperature Measurement, Min
-210 °C
Temperature Resolution
1 °C, 0.1 °C
Temperature Sensor Type
Thermocouple
Width
91 mm
Description
L'OMEGA™ HH506RA propose un thermomètre numérique à plusiers fonctions, mais abordable, qui accepte les thermocouples types K, J, R, S, T, E et N. L'instrument dispose de la fonction d'enregistrement manuel qui peut stocker jusqu'à 128 lectures de T1/T2 par simple pression d'un bouton.
En mode d'enregistre il permet l'enregistrement automatique de 1024 valeurs aux intervalles programmés entre 1 seconde et 24 heures. Il dispose également des fonctions MAXI, MINI, MOYENNE, RELATIVE et MAINTIEN.
Le modèle HH506A n'a pas de sortie de données, les valeurs enregistrées peuvent être rappelés seulement via l'écran.
CARACTERISTIQUES Gamme de Mesure: Type K: (0.1°, 1° au-dessus de 2000°F) -200 à 1372°C (-328 à 2501°F) Type J: (0.1°, 1° au-dessus 2000°F) -210 à 1200°C (-346 à 2192°F) Type T: (0.1°) -200 à 400°C (-328 à 752°F) Type E: (0.1°) -210 à 1000°C (-346 à 1832°F) Type R: (1°) 0 à 1767°C (32 à 3212°F) Type S: (1°) 0 à 1767°C (32 à 3212°F) Type N: (0.1°, 1° au-dessus 2000°F) -50 à 1300°C (-58 à 2372°F) Selon le standard de précision de température ITS-90 Précision: Type K/J/T/E: ±(0.05% de la lecture + 0.3°C) sur -50 à 1370°C ±(0.05% de la lecture + 0.7°C) sur -50 à -210°C ±(0.05% de la lecture + 0.6°F) sur -58 à 2501°F ±(0.05% de la lecture + 1.4°F) sur -58 à -346°F N Type: ±(0.05% de la lecture + 0.8°C) sur -50 à 0°C ±(0.05% de la lecture + 0.4°C) sur 0 à 1300°C ±(0.05% de la lecture + 1.6°F) sur -58 à 32°F ±(0.05% de la lecture + 0.8°F) sur 32 à 2372°F R/S Type: ±(0.05% de la lecture + 2°C) sur 0 to 1767°C ±(0.05% de la lecture + 4°F) sur 32 to 3212°F Résolution: 0.1°C/1°C (0.1°F/1°F) Alimentation: pile 9 V (incluse) Capacité d'Enregistreur: Sauvegarder de Données: 128 valeurs horodatées Enregistreur de Données: 1024 valeurs (intervalle d'enregistrement 1 seconde jusqu'à 23h, 59m, 59s)
Rated 1 out of
5 by
Cal Specialist from
Not worthy of the Omega name.Won't hold calibration. Wasn't even in spec when it was first received. Receptacles for the thermocouples have lost tension and connectors will not stay in contact.
Date published: 2017-02-15
Rated 3 out of
5 by
BW352 from
Good, but imperfectI have experienced none of the issues previously reported here. However, I have twice tried to log more than 24 hours of data. Both times, logging stopped and I didn't know until it was too late. I never had a problem with short logs (1min-4 hours), even when filling multiple files with data. With adjusted setting, I should have had no more data points in my 24-hr logs, yet the logs still crashed after a very short time
Date published: 2018-03-28
Rated 5 out of
5 by
DJ Sugg from
Great buy for AMS 2750 Field Test CalibrationVery reliable instrument at a very reasonable price. We use these as Field Test Calibration Instruments under AMS2750. No problems with getting them calibrated.
Date published: 2024-10-10
Rated 5 out of
5 by
JohnTognetti from
Temperature monitorPurchase this with the intention of using it to monitor and record temperature of a high current prototype while in operation.
Date published: 2024-05-23
Rated 5 out of
5 by
caloprymnus from
Very handyEasy to use and works great. Responds immediately to a change in temperature. The dual system is very convenient.
Both T1 and T2 are recorded there is no way to adjust for one or the other.
Answered by: ANBENG
Date published: 2020-04-04
IS THE OMEGA® HH506A FDA COMPLIANT, TO THE FDA 21 CFR Part II, GMP, GLP?
Asked by: Anonymous
Thank you for your inquiry.
Unfortunately, this product is not FDA compliant.
Answered by: Application Engineer JB
Date published: 2019-09-17
I have a HH506R to which I have 2 type K thermocouples (CH+, AL-), the T2 display is stuck as type E and won't change when I press the "type" button even when the main display is showing T2. Kindly help. ( Sorry if not appropriate thread for this Q)
Asked by: srikar
Thank you for your inquiry. Please try removing the battery, then re-install the battery and try to reset the unit, and reprogram the thermocouple type. If you still have issues, feel free to call our temperature group at 1-888-826-6342 or email to temp@omega.com
Answered by: Application Engineer JB
Date published: 2021-12-03
Can I download the software for the HH506RA? my computer does not have a CD drive
Asked by: Annemieke
Yes the SW can be found on Omega's FTP site for temperature products https://www.omega.com/en-us/ftp
Answered by: ApplicationEngineerANB
Date published: 2020-11-05
Is there a video showing how to setup and use the HH506RA temperature logger?
Asked by: SonOfLightning
There is not a video for the operation of the HH506RA but Applications Engineers are available by phone to contact and discuss features as needed.
Answered by: ApplicationEngineerANB
Date published: 2024-05-29
Is there an option to download logged data to my PC? It seems I couldn't find an I/O interface
Asked by: ChEngineer Boy
The HH506RA comes with the Software and communication cable when purchased which allows downloading to computers. If it was lost you can order HH506RA-USB-SW to replace it.
Answered by: ApplicationEngineerANB
Date published: 2020-07-13
How often the HH506RA should be calibrated and how should it be calibrated?
Asked by: Jack001
Thank you for your inquiry. We recommend an annual calibration (once a year).
Answered by: Engineer CB
Date published: 2020-07-16
Is the current software for the HH506RA compatible with Windows 11 ? Does not show when you go to https://www.omega.com/en-us/ftp.
Asked by: BRVAZ
The Software for the HH506RA and has not been tested with OS11. If you need a meter for the latest operating systems check out the OM-HL-EH-TC compatible up to OS10.
