Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
LDI-G19
Compact, LVIT Linear Position Sensors
Modèles en stock
- Contactless Operation Prevents Wear Out from Dithering or Cycling
- Excellent Stroke-to-Length Ratio
- Rugged 19 mm (0.75') Diameter Stainless Steel Housing
- Field Adjustable Range Scaling
LDI-G19
Depuis
C$
1 396.20
Modèles en stock
L'aperçu du produit
- Additional Features 1 Spring loaded
- Bandwidth 300 Hz (-3 dB)
- Enclosure Ratings IP67
- Housing Material Stainless Steel
- Mounting Torque 0.41 Kgf/cm
- Operating Temperature, Max 85 °C
- Operating Temperature, Min -20 °C
- Relative Humidity 95% RH, non-condensing
- Resolution 0.025% of FS
- Shock 1000 g, 11 ms
- Temperature Coefficient 0.015% of FS/°C
- Vibration 5 to 20 Hz, 0.5" p-p; 20 to 2000 Hz, 4.2 g p-p
The LDI-G19 Series of LVIT (Linear Variable Inductive Transducer) spring-loaded position sensors from Omega are contactless devices designed for dimension measurements in QA labs, or position measuring applications in factory automation systems and in various industrial and commercial applications such as automotive testing, mil/aero test stands, robotic arms, and packaging equipment, where the sensing element cannot be attached to the object being measured. LDI-G19s are offered in nominal full scale ranges from 6.35 to 100 mm (0.25 to 4.0") with excellent resolution and high stroke-to-body-length ratios. The maximum tip contact force on the item being measured is 1 pound.
LDI-G19 sensors have a 19 mm (0.75") diameter aluminum or stainless steel body with a 1/2-20 UNF-2A thread 38 mm (1.5") along with two 19 mm (0.75") hex jam nuts for drop-in installation in place of a spring-loaded DC LVDT gage head. These sensors utilize a probe equipped with a No. 9 contact tip and are offered with a PT02-10-6P connection (mating connector sold separately.) Operating from a variety of DC voltages, these sensors are available with a choice of one of four analog outputs. Calibration and set-up is simplified with one wire field programming feature, this provides the ability to match the endpoints of the sensor's analog output with the ends of the range of motion of the assembly to which the sensor is attached. This feature permits a user to optimize the position measuring system's resolution over its full range of motion.
Specifications:
Analog I/Os:
0 to 10V output with 12 to 30V input, 35 mA max;
4 to 20 mA (3-wire) output with 18 to 30V input, 60 mA max at 75°C (167°F max)
Measuring Range: 6 to 100 mm (0.25 to 4") full scale
Linearity Error: ±0.15% of Full Scale Output (FSO) typical, ±0.25% max
Resolution: 0.025% of FS
Update Rate: 300 Hz nominal
Operating Temperature: -20 to 85°C (-4 to 185°F)
Temperature Coefficient: 0.015% of FS/degree°C
Vibration: 5 to 20 Hz, 0.5" p-p; 20 to 2000 Hz, 4.2 g p-p
Shock: 1000 g, 11 ms
Terminations: IP67
Humidity: 95% RH, non-condensing
Housing Material: Stainless steel
LDI-G19 sensors have a 19 mm (0.75") diameter aluminum or stainless steel body with a 1/2-20 UNF-2A thread 38 mm (1.5") along with two 19 mm (0.75") hex jam nuts for drop-in installation in place of a spring-loaded DC LVDT gage head. These sensors utilize a probe equipped with a No. 9 contact tip and are offered with a PT02-10-6P connection (mating connector sold separately.) Operating from a variety of DC voltages, these sensors are available with a choice of one of four analog outputs. Calibration and set-up is simplified with one wire field programming feature, this provides the ability to match the endpoints of the sensor's analog output with the ends of the range of motion of the assembly to which the sensor is attached. This feature permits a user to optimize the position measuring system's resolution over its full range of motion.
Specifications:
Analog I/Os:
0 to 10V output with 12 to 30V input, 35 mA max;
4 to 20 mA (3-wire) output with 18 to 30V input, 60 mA max at 75°C (167°F max)
Measuring Range: 6 to 100 mm (0.25 to 4") full scale
Linearity Error: ±0.15% of Full Scale Output (FSO) typical, ±0.25% max
Resolution: 0.025% of FS
Update Rate: 300 Hz nominal
Operating Temperature: -20 to 85°C (-4 to 185°F)
Temperature Coefficient: 0.015% of FS/degree°C
Vibration: 5 to 20 Hz, 0.5" p-p; 20 to 2000 Hz, 4.2 g p-p
Shock: 1000 g, 11 ms
Terminations: IP67
Humidity: 95% RH, non-condensing
Housing Material: Stainless steel
| Wiring Table | |
|---|---|
| Function | PT02-10 Pin |
| + Power Input | E |
| Ground | D |
| Analog Output | A |
| Field Programmability | B |
| ‘A’ Nominal Range | ‘B’ Body Length | Spring Rate | Max. Force | ||||
|---|---|---|---|---|---|---|---|
| mm | Inches | mm | Inches | kgf/cm | Lbf/in | kgf | Lbf |
| 6.35 | 0.25 | 88.9 | 3.5 | 0.134 | 0.75 | 0.41 | 0.9 |
| 12.7 | 0.5 | 88.9 | 3.5 | 0.134 | 0.75 | 0.41 | 0.9 |
| 25.4 | 1 | 101.6 | 3.5 | 0.134 | 0.75 | 0.41 | 0.9 |
| 50.8 | 2 | 129.0 | 5.08 | 0.077 | 0.43 | 0.45 | 1 |
| 76.2 | 3 | 156.5 | 6.16 | 0.054 | 0.3 | 0.45 | 1 |
| 101.6 | 4 | 184.1 | 7.25 | 0.041 | 0.23 | 0.45 | 1 |
Afficher les notes et les avis
Rated 5 out of
5
by
GregP from
Works great!
Works great, exactly what we needed. Good price, and delivered on time.
Date published: 2022-03-09
Can the LDI-G19-100-A210S be installed where the rod is submerged in oil?
Hello, Typically these units are not rated for use in submersible application, even if it means the body is not submersed. The terminations themselves are IP67, so they are resistant to the elements, but these are not tested for submersible application. If you need any other assistance kindly email pressure@omega.com
Date published: 2021-06-22