LDX-2

LVDT Signal Conditioner, Loop Powered for AC LVDT's

Cliquez et maintenez pour zoomer

Output Signal

Current

C$975.88

Article# LDX-2

Calendrier de remise sur volume

Qté

Ajouté à votre panier

En stock

Délai de livraison (si pas en stock): 10 semaines

Brand
Accuracy	± 0.02 %
Approvals	CE
Electrical Output	4 to 20 mA
Enclosure Ratings	IP65, NEMA Type 12
Gain Range	3.5 to 1 switched, 5 to 1 adjustable
Height	120.65 mm
Input Electrical Connection	Screw terminals; access through 2 cable ports for wires 1 to 5 mm (0.04 to 0.2") diameter
Input Noise	0 to 1.5 Hz: 1.4 µVRMS (RTI)
Input Range	30 to 530 mV/V
Input Type	Voltage
Length	54.86 mm
Mounting	Through holes in base by 2 screws and nuts, can be mounted to DIN 46277-1 rail
Non-Linearity	Better than 0.02%
Number of Wires	2, 3
Operating Temperature, Max	70 °C
Operating Temperature, Min	0 °C
Output Detail	Output Current: 4 to 20 mA 2-wire or 0 to 20 mA 3-wire. Output Ripple:<50 µA p-p @ 10 kHz Output Filter: Cutoff frequency -3 dB @ 25 Hz second-order linearity: <0.02%
Output Signal	Current
Protection	Oscillator Protection: Open and short circuit protected, Output Protection: Open and short circuit protected, Supply Protection: Reverse polarity protected
Sensitivity	Transducer : 30 to 530 mV/V
Sensor Excitation	0.9 Vrms @ 5 kHz nominal, 13 kHz switchable
Storage Temperature, Max	80 °C
Storage Temperature, Min	-40 °C
Supply Power Type	DC
Supply Voltage	13 to 48 Vdc, up to 30 mA
Temperature Coefficient	Zero: Better than 0.01% FS/°C;Gain: Better than 0.01% FS/°C
Weight	220 g
Width	80 mm
Voir toutes Spécs Montrer moins

PDF et manuels

Conformité

Afficher les notes et les avis