Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
LR10-Series
Flowline Radar Level Transmitter for Corrosive Environments
- PFA encapsulated antenna and mount for corrosive media.
- Simple configuration via integral push button display module.
- 26 GHz. pulse radar is unaffected by vapor or condensation.
- 12” (30cm) dead band enables utilization of the entire tank.
LR10-Series
Depuis
C$
2,571.90
L'aperçu du produit
The general purpose 26 GHz. pulse radar level transmitter provides continuous level measurement up to 32.8’ (10m) with a 4-20 mA signal output, and is configured via its integral push button display module. The non-contact liquid level sensor is intended for chemical or water storage applications in above grade metal or reinforced concrete tanks or below grade tanks of any material. Select this sensor for easy application conditions with corrosive media, light agitation, condensation or vapor, and installation in a low-profile tank adapter or flange fitting. Typical applications include chemical bulk storage and tanker trucks.
Afficher les notes et les avis
Is there a minimum clearance around the probe head, like the beam diameter on the ultrasonics? Can it be placed into a pipe, what is the minimum diameter?
Thank you for your inquiry about the pulse radar transmitter. It has a 22 degree beam angle and a 12 inch dead band which means you will not measure any liquid level within that distance.
Date published: 2021-06-08
RoHS 2015/863 - Voir le certificat
Approuvé CE