Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
MX2001-Series
HOBO MX Bluetooth Low Energy Water Level Data Loggers
Modèles en stock
- Bluetooth Low Energy (BLE) 100-foot communications
- Stainless steel or Titanium sensor end
- 9 to 76 Meter (30-250 foot) Range dpending on model
- Accuracy: Typical error: ± 0.05% to ± 0.075% FS, 0.5-3.8 cm (0.015 ft) water
MX2001-Series
Depuis
C$
1 012.47
Modèles en stock
L'aperçu du produit
- Accuracy Note Temperature Sensor Accuracy: ± 0.44°C from 0° to 50°C, Water Level Accuracy: ± 0.05% FS, 0.5 cm, Pressure Accuracy: ± 0.075% FS, 0.3 cm (0.01 ft) water
- Approvals CE, FCC
- Battery life 1 yr, typical with reading interval of 1 min
- Battery Size and Type Alkaline AAA
- Configuration HOBOmobile® app Android, iOS
- Data Interface Bluetooth
- Data Interface Note Mobile Device Compatibility: iOS 8.3, 8.4 & 9.0, and Bluetooth 4.0 or later Bluetooth Compatibility :Bluetooth 4.0 or later (Bluetooth Low Energy, Bluetooth Smart)
- Diameter 1 in
- Enclosure Ratings IP67, NEMA Type 6
- Form Factor Note "Make sure the top end is connected to the sensor end with the water level logger cable as described in Getting Started with the Logger. 2. Attach any small parts, such as bolts with nuts, before you go into the field so you don’t risk losing them in the field. 3. Lower the logger into the well or stilling well. 4. Use the Onset well cap if it is a 5 cm (2 inch) well. Otherwise, use a 1/4-inch bolt of sufficient length to span the well top or washer"
- Input Type Internal
- Length 3.9 in
- Logging Modes burst, Fixed interval, multiple intervals
- Measurement Type Pressure, Temperature, Water Level
- Memory Modes stop when full, Wrap when full
- Memory Note Approximately 2 minutes; may take longer the further the device is from the top end of the logger
- Number of Measurements 2
- Operating Temperature, Max 50 °C
- Operating Temperature, Min -20 °C
- Pressure Accuracy ± 0.075 %
- Pressure, Min 69 kPa
- Radio Power 1 mW
- Samples,Max ~33k Samples, Interval Selectable 1 sec to 18hrs
- Start Modes At set date and time, Button Push, Immediate Start, Next Interval
- Stop Modes Button Push, When Memory is Full, Manual via remote software connection, At set date and time, At set Duration
- Supply Power Type Battery
- Temperature Accuracy ± 0.44 °C
- Temperature Measurement, Max 50 °C
- Temperature Measurement, Min -20 °C
- Temperature Resolution 0.1 °C
- Time Accuracy ± 1 minute/month 0° to 50°C
- Transmission Range 30.5 m
The HOBO MX2001 series water level data loggers are designed for convenient wireless setup and download from mobile devices via Bluetooth Low Energy (BLE). These loggers dramatically simplify and lower the cost of field data collection by providing wireless access to high-accuracy water level and temperature measurements right from a mobile phone or tablet. The MX2001 Series consists of a top-end unit and a water level sensor, which are sold as a set, plus a direct-read cable to connect them. A functional system requires both a choice of the desired MX2001-* top end unit / sensor and one of 6 CABLE-DR-* different length direct read water level cables. The direct read cables are interchangeable so that the loggers are easy to redeploy for future applications.
You can download the HOBOmobile app for free for Android devices here and for iOS devices here.
The Hobo MX Gateway (purchased separately) can be used to aggregate the data from up to 100 Hobo MX data loggers directly to a PC via Ethernet or WiFi communications.
You can download the HOBOmobile app for free for Android devices here and for iOS devices here.
The Hobo MX Gateway (purchased separately) can be used to aggregate the data from up to 100 Hobo MX data loggers directly to a PC via Ethernet or WiFi communications.
PDF et manuels
