Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
PHE1300-1400-2300-Series
Electrodes de pH ALpHA<sup>®</sup> pour le laboratoire
Modèles en stock
- Gamme étendue pour des applications multiples
- Réalisées avec un câble de 75cm à 1m, longueurs différentes sur demande
- Connecteur BNC ou standard U.S.
PHE1300-1400-2300-Series
Depuis
C$
83.74
Modèles en stock
L'aperçu du produit
- Process Connection Size N/A
- Process Connection Type N/A
- Process Temperature, Min 0 °C
- Sensor Type N/A
- Temperature Sensor Type N/A
Description
Les prix des modèles les plus courants sont donnés dans le tableau "Pour commander".
Pour obtenir les caractéristiques complètes de ces produits, consultez la notice commerciale par le lien en bas de cette page.
PDF et manuels
Afficher les notes et les avis
Rated 5 out of
5
by
Invacare Corporation from
.
These probes are great we have never had problems with these
Date published: 2024-03-05
Rated 5 out of
5
by
Manthony from
Great experience
Very fast service and reasonable price. Customer support was also helpful in the product selection process.
Date published: 2023-12-29
Rated 5 out of
5
by
PeeJay from
Great Electrodes
Great Electrodes Worked Without Fail Good Stuff Accurate
Date published: 2022-12-05
Rated 5 out of
5
by
Ronald E Creech from
Great Gel Filled Electrode
Bought this electrode for a replacement electrode for my 20 + year old PH meter no longer made. The electrode actually worked better than the original electrode when it was new with no span error from PH of 4 to PH of 7. Linearity was very good. Usually I had to tweak the cal pot a little on both ends of the range until the unit read both 4 and 7 PH but this was right on after initial adjustment.
Date published: 2021-04-15
Rated 4 out of
5
by
Steelhead from
Helps our winemaking
Just bought our third one. The previous one lasted 6 years. It only gets used for a couple of months each year. We have found it needs to be stored in a temperature controlled environment, or it will have a short life. Good results for the price.
Date published: 2018-10-05
Rated 5 out of
5
by
GW36 from
Great Price
Great probe for the cost. I have been using these for several years now and they work & hold up well.
Date published: 2017-07-12
What is the output signal range? Do these sensors need an amplifier?
Thank you for your inquiry. Unfortunately, pH/ORP probes have too high of an impedance and requires a transmitter such as PHTX-100 to convert to a suitable or usable signal output as a 4 to 20 mA.
Date published: 2023-10-04
Is there a warranty on these probes?
Thank you for your inquiry. There is a 1 year warranty for this pH probe and also, please note that the shelf for all pH probes is 6 to 12 months.
Date published: 2024-04-18