Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
PP3-PP6-PP10
Sondes thermocouple multipoint
Modèles en stock
- 3, 6 ou 10 points de mesure
- Longueur : 45 ou 90 cm
- Diamètre 4,8mm
- Type J, K, T et E, classe 1
- Terminaisons aisément identifiables
- Jusqu'à 650°C
PP3-PP6-PP10
Depuis
C$
728.76
Modèles en stock
L'aperçu du produit
- Cable Length 40 in
- Color Code Standard ANSI
- Electrical Connection Miniature Male Thermocouple Connector
- Insulation PFA
- Probe Diameter 0.1875 in
- Process Temperature, Min 0 °C
- Sheath Material 316 Stainless Steel
- Wire Gauge 24 AWG
Description
Sonde thermocouple est d' une variété de longueurs, des configurations de point. Sélectionnez votre propre espacement entre les points de la température, le nombre de points de mesures, le diamètre, le matériel de gaine de thermocouple.
PDF et manuels
Afficher les notes et les avis
Rated 4 out of
5
by
Forsmann from
Almost Perfect
I have used two of these for some time. would be nice to get a 24" with 6 TC's at 2" apart readings. Having only the 18" or 36" as choices makes it rough to be very versatile.
Date published: 2016-10-12
Is it possible to have this built with 12 sensors?
Thank you for the inquiry. Yes, these can be made with 12 sensors. Probes are not bendable.
Best regards
OMEGA
Date published: 2021-03-06
How are these calibrated?
Hi Sjay,
Individual probes are checked before assembly. If you require NIST traceable certification, it must be noted part as of initial request.
Best regards,
OMEGA
Date published: 2024-09-25
What is the spacing and thermal isolation of the sensors?
Thank you for your inquiry. 4.5" Spacing between each sensor. No thermal isolation information available.
Date published: 2021-01-30
Would this work in a 60" continuous oven with the probe perpendicular to direction of travel?
Thank you for the inquiry. Profile probe may work for your application. Please forward request to TEMP@DWYEROMEGA.COM.
Best regards
OMEGA
Date published: 2024-12-19
I would like to get a quote for a custom profile probe by email. What I need to change is the distance between the sensors. Also I would like to know what fitting size for the probe since I'm going to use it in pressurized system. Thank you.
Thank you for your inquiry. Please send your custom profile probe request to temp@omega.com and we will review your requirements and respond accordingly.
Date published: 2021-04-23
Looking at profile probe PP6-36-K-U-18. What is the minimum spacing available between the points? We ideally would like 1/2" spacing, but can also accept 1" spacing. Please advise the minimum spacing available. Thanks
On the PP6-36-K-U-18 sensor spacing is at 1.75" and the PP10 probes would be 1.25" spacing. These are standard probes and any alterations would require it to be a Custom product. You can provide a sketch from the product pages data sheet with all the needed parameters and send it to temperature@omega.com.
Date published: 2022-11-18