Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
PSW-100
General Purpose Pressure Switches, In NEMA-4X Enclosures
Modèles en stock
- UL Listed,
- Ranges from 0.5 inH2O to 3000 psi
- SPDT or DPDT Switches
- Adjustment Lock
PSW-100
Depuis
C$
401.66
Modèles en stock
L'aperçu du produit
- Approvals UL listed
- Electrical Connection Screw Terminal
- Enclosure Ratings IP66, NEMA Type 4X
- Height 7.5 in
- Length 2.3 in
- Operating Temperature, Max 70 °C
- Operating Temperature, Min -40 °C
- Operating Temperature Note -40 to 70°C (-40 to 158°F), except models PSW-107 to PSW-117 and PSW-134 to PSW-139: -20 to 70°C (-4 to 158°F); setpoint typically shifts less than 1% of range for a 30°C (54°F) ambient temperature change
- Process Connection Type NPT Female
- Shock Setpoint repeats after 15 g, 10 ms duration
- Storage Temperature, Max 70 °C
- Storage Temperature, Min -55 °C
- Switch Single
- Switch Note One SPDT or DPDT switch can be wired “normally open” or “normally closed”
- Switch Type SPDT NO/NC, Selectable
- Vibration Setpoint repeats after 2.5 g, 5 to 500 Hz
- Weight 2 lb
- Width 4 in
OMEGA's affordable, general purpose pressure switches offer distinct advantages over most similar style switches, including DPDT or adjustable deadband switches, as well as a wide selection of adjustable ranges from 0.5 inH2O to 3000 psi.
SPECIFICATIONS
Approval: UL listed,
Storage Temperature: -55 to 70°C (-67 to 158°F)
Process Temperature:
Stainless Steel: -55 to 205°C (-67 to 401°F)
Phosphor Bronze: -40 to 150°C (-40 to 302°F)
Buna-N: -25 to 95°C (-13 to 203°F)
Ambient Temperature: -40 to 70°C (-40 to 158°F), except models PSW-107 to PSW-117 and PSW-134 to PSW-139: -20 to 70°C (-4 to 158°F). Setpoint typically shifts less than 1% of range for a 30°C (54°F) ambient temperature change.
Shock: Setpoint repeats after 15 g, 10 ms duration.
Vibration: Setpoint repeats after 2.5 g, 5 to 500 Hz
SetPoint Repeatability: All models ± 1% of adjustable range, except models PSW-118 to PSW-125 and PSW-132 to PSW-133 are ± 1.5%
Switch Output: One SPDT or DPDT switch may be wired normally open or normally closed
Electrical Rating: Standard 15 A 125/250/480 Vac resistive External Manual Reset: 15 A 125/250 Vac resistive Double Pole Double Throw: 10 A 125/250 Vac resistive
Enclosure: Die cast aluminum (max. 0.6% copper). Epoxy-coated blue enclosure, gasketed, complies with NEMA-4X
Weight: Approximately 0.9 kg (2 lb)
Electrical Connection: 1/2 NPT and Two 7/8' diameter knockouts
Dimensions: 191 max H x 101 W x 60 mm D (7.5 max 4 x 2.3')
SPECIFICATIONS
Approval: UL listed,
Storage Temperature: -55 to 70°C (-67 to 158°F)
Process Temperature:
Stainless Steel: -55 to 205°C (-67 to 401°F)
Phosphor Bronze: -40 to 150°C (-40 to 302°F)
Buna-N: -25 to 95°C (-13 to 203°F)
Ambient Temperature: -40 to 70°C (-40 to 158°F), except models PSW-107 to PSW-117 and PSW-134 to PSW-139: -20 to 70°C (-4 to 158°F). Setpoint typically shifts less than 1% of range for a 30°C (54°F) ambient temperature change.
Shock: Setpoint repeats after 15 g, 10 ms duration.
Vibration: Setpoint repeats after 2.5 g, 5 to 500 Hz
SetPoint Repeatability: All models ± 1% of adjustable range, except models PSW-118 to PSW-125 and PSW-132 to PSW-133 are ± 1.5%
Switch Output: One SPDT or DPDT switch may be wired normally open or normally closed
Electrical Rating: Standard 15 A 125/250/480 Vac resistive External Manual Reset: 15 A 125/250 Vac resistive Double Pole Double Throw: 10 A 125/250 Vac resistive
Enclosure: Die cast aluminum (max. 0.6% copper). Epoxy-coated blue enclosure, gasketed, complies with NEMA-4X
Weight: Approximately 0.9 kg (2 lb)
Electrical Connection: 1/2 NPT and Two 7/8' diameter knockouts
Dimensions: 191 max H x 101 W x 60 mm D (7.5 max 4 x 2.3')
Afficher les notes et les avis
Rated 3 out of
5
by
Onil Fillion from
Good but doesn't last & none repairable.
The unit itself is well built and does a good job but over time the seals will leak and then the chamber where the micro-switch is fills up with oil. Seal failure is understandable but there's no seal kits available to reseal it so I've had to change it. 3 of them in the last 6 years.
Date published: 2021-04-26
Rated 1 out of
5
by
AK1234 from
DPDT Switch Deception
Bought this because it had a double pole 15A switch. There is only a single pole switch! Called on overnight shipping status, forever on hold, no call back. Item arrived two days later - not overnight as paid!
Date published: 2020-09-12
What is the current rating of the contact at 24VDC for the PSW-120?
The DC ratings for the PSW-120 pressure switches are as follows.
125VDC 0.5A Resistive, 0.03A Inductive
24VDC 2.0A Resistive, 1.0A Inductive
Thank you and please feel free to contact us again if you have additional questions
Date published: 2019-11-20
What are the materials of all wetted parts?
If you are asking specifically about the PSW-108 the wetted parts are Buna-N and Brass.
Date published: 2020-11-23