Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
SV170-Series
2-Way, NC, Direct Acting, SS, Solenoid Valves
Modèles en stock
- Stainless Steel Solenoid Valve
- Lead Free
- Normally Closed
- Ideal for Hot Water and Steam
SV170-Series
Depuis
C$
669.01
Modèles en stock
L'aperçu du produit
- Coil Molding Material Black Polyphenylensulphide
- Cycling Rate 60 cpm
- Duty Cycle 100%
- Enclosure Ratings NEMA Type 4
- Media Type N/A
- Mounting Any (preferably with solenoid system upright)
- Process Connection Type NPT Male
- Process Temperature, Min -10 °C
SV170 Series 2-way 316 SS solenoid valves are internally piloted. They feature 316 stainless steel construction and FKM seal material. The temperature range of -10 to 138°C (14 to 280°F) and the FKM O-ring make these valves ideal for many aggressive liquids and gases. A strain-relief connector is supplied with each unit. A ½" conduit plug is also available.
SPECIFICATIONS
Mounting Position: Any (preferably with solenoid system upright)
Maximum Process Temperature: -10 to 138°C (14 to 280°F) FKM O-ring
Maximum Ambient Temperature: Coil dependent (see ratings on coils)
Voltage Tolerance: ± 10% AC, ± 5% DC
Opening Time (ms): Approximately 100 to 200
Closing Time (ms): Approximately 200 to 1200
Cycling Rate: Approximately 60 cpm
Duty Cycle: Continuous (100%)
Coil Molding Material:
Black Polyphenylensulphide (Class H):
SV8COIL-115/60 HZ
SV8COIL-220/60 HZ
Black Epoxy Resin (Class H):
All 14 W coils, NEMA 4
Coil Molding Material:
Black Polyphenylensulphide (Class H):
SV8COIL-115/60 HZ
SV8COIL-220/60 HZ
Black Epoxy Resin (Class H):
All 14 W coils, NEMA 4
SPECIFICATIONS
Mounting Position: Any (preferably with solenoid system upright)
Maximum Process Temperature: -10 to 138°C (14 to 280°F) FKM O-ring
Maximum Ambient Temperature: Coil dependent (see ratings on coils)
Voltage Tolerance: ± 10% AC, ± 5% DC
Opening Time (ms): Approximately 100 to 200
Closing Time (ms): Approximately 200 to 1200
Cycling Rate: Approximately 60 cpm
Duty Cycle: Continuous (100%)
Coil Molding Material:
Black Polyphenylensulphide (Class H):
SV8COIL-115/60 HZ
SV8COIL-220/60 HZ
Black Epoxy Resin (Class H):
All 14 W coils, NEMA 4
Coil Molding Material:
Black Polyphenylensulphide (Class H):
SV8COIL-115/60 HZ
SV8COIL-220/60 HZ
Black Epoxy Resin (Class H):
All 14 W coils, NEMA 4
PDF et manuels
Afficher les notes et les avis
Rated 1 out of
5
by
rvin from
Use caution when ordering, error on order form.
When deciding which type of coil to order after selecting pipe size use extreme caution when consulting the "Data Sheet" PDF shown on the product page for order specifications. For instance when ordering the SV176 (1.5" size) the PDF data sheet mistakes that "†† 14 W DC coils are standard on valves larger than 1"." This is incorrect, the standard coils are 14 W AC. So if you want DC coils you have order them (# SV14COIL-24DC) separately.
CAREFULLY INSPECT THE COIL VOLTAGE STICKER WHEN YOU RECEIVE THEM TO CONFIRM CORRECT VOLTAGE!
Date published: 2019-05-28