Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
TAT3-Series
Borniers et adaptateurs pour connecteurs
- Fits Through the Standard 51 mm (2') Bung Opening in 55 Gallon Drums
- Ideal for Improving the Flow of Lard, Tar, Oils and Other High Viscosity Solutions
- Double Pole 16 to 121ºC (60 to 250°F) Thermostat with Over- Temperature Cutout and Pilot Lamp to Indicate Heater On/Off Status
- Only 203 mm (8') of Vertical Riser is Heated, Allowing Liquid Level to Fluctuate without Damaging the Heater
TAT3-Series
Depuis
C$
1,057.30
L'aperçu du produit
- Additional Features Integral Thermostat
- Enclosure Ratings NEMA Type 4, NEMA Type 7
- Enclosure Type Water Resistant
- Heating Element Length 8 in
- Heating Element Width 19 in
- Operating Temperature, Max 121 °C
- Operating Temperature, Min 16 °C
- Riser Length 36 in
Installation, Operation and Maintenance Instructions
1. Ensure the Vertical Heated Portion, Which Extends 203 mm (8") Up Riser from Bottom of Element, is Always Fully Immersed
2. Use in Metal Drums, Containers or Heat Resistant Tanks Only
3. All Wiring Should Be in Accordance with NEC/Nfpa and Local Codes
4. Use Techniques Safe for the Heater and Surrounding Environment
5. Use Mounting Brackets to Position Heater Away from Tank Wall and Above Sludge Buildup at Bottom of Tank
6. Periodically Remove the Heater to Clean Residues and Inspect for Damage
1. Ensure the Vertical Heated Portion, Which Extends 203 mm (8") Up Riser from Bottom of Element, is Always Fully Immersed
2. Use in Metal Drums, Containers or Heat Resistant Tanks Only
3. All Wiring Should Be in Accordance with NEC/Nfpa and Local Codes
4. Use Techniques Safe for the Heater and Surrounding Environment
5. Use Mounting Brackets to Position Heater Away from Tank Wall and Above Sludge Buildup at Bottom of Tank
6. Periodically Remove the Heater to Clean Residues and Inspect for Damage
| Model No. | Sheath | Watt Density | Watts | Volts | A | B | |||
|---|---|---|---|---|---|---|---|---|---|
| watt/in2 | watt/cm2 | mm | inch | mm | inch | ||||
| TAT30003 | Copper | 8 | 1.2 | 1000 | 120 | 914 | 36 | 483 | 19 |
| TAT30004 | 32 | 5.0 | 4000 | 240 | |||||
| TAT30002 | Stainless Steel | 8 | 1.2 | 1000 | 120 | 914 | 36 | 483 | 19 |
| TAT30001 | 32 | 5.0 | 4000 | 240 | |||||
| TAT30005 | Steel | 8 | 1.2 | 1000 | 120 | 914 | 36 | 483 | 19 |
| TAT30006 | 32 | 5.0 | 4000 | 240 | |||||
| Note: This style heater can be manufactured with “A” and “B” dimensions suitable for other applications. Consult Omega with your requirements. Ordering Example: TAT30003, 1000 watts, 120 Vac immersion heater. | |||||||||
PDF et manuels
