Utilisez notre configurateur personnalisé pour affiner votre produit
Configuration terminée. Veuillez ajouter au panier pour la conserver ou quitter la configuration
Échec de l'enregistrement des configurations, cliquez sur le bouton Configurer Recommencer
L'aperçu du produit
Additional Features 2
Dual Elements
Insulation
Fiberglass with Stainless Steel Overbraid
Molded Transition Temperature, Max
480 °C
Molded Transition Temperature, Min
0 °C
Number of Connectors
N/A
Pressure, Max
2500 psi
Probe Length
0.5 in
Probe Type
Pipe Plug Thermocouple Probes
Process Connection Type
NPT Male
Process Temperature, Min
0 °C
Sheath Material
304 Stainless Steel
Temperature Sensor Type
Thermocouple
Transition Joint Temperature, Max
480 °C
Transition Joint Temperature, Min
0 °C
Wire Type
Stranded
Description
Sondes à raccord fileté NPT sont à haute pression et idéales pour des utilisations industrielle ou dans le domaine des surgelés. D'autres gaines de longueur sont disponibles. Les fils isolés, soie de verre avec gaine en acier inoxydable. Des connecteurs standard ou miniature. Les soudures isolées ou à la masse ou apparentes qui sont disponibles pour des mesures de la température d'air ou de gaz aux pressions ambiantes.
Rated 5 out of
5 by
Phil from
Came as promised.Nice to have the NPT threads to put it into piping system. Arrived on time and in great condition.
Date published: 2016-10-09
Rated 5 out of
5 by
Facilities from
BAE SystemsThermocouple was spec'ed by customer to order. Should work great for what we need. Paying attention to shipping was the hardest part
Date published: 2024-04-05
Rated 5 out of
5 by
TWallace from
It works.It arrived in good working order and works as expected.
Date published: 2023-09-25
Rated 5 out of
5 by
EHelland from
Works well and easy to install.Works well and easy to install I ordered this product and it works well plus easy to install
Date published: 2023-08-13
Rated 5 out of
5 by
Claudio Braga from
ThermocouplePerfect in this function, easy installation, durable
Date published: 2023-06-01
Rated 5 out of
5 by
Eric H from
Good Product and InterfaceProcess Was Easy and Fast. The thermocouple arrived and was exactly what we were looking for.
Date published: 2022-09-12
Rated 3 out of
5 by
TRaymond from
Custom madeThe thermocouple tip was not under stainless like the photo. iIt looks like it was just covered with epoxy.
Date published: 2022-08-21
Rated 5 out of
5 by
Great quality from
Great qualityGreat quality. While we have not used it for long I was impressed with the build quality.
Why is T Type probe rated only to 0°C when type T thermocouple wire is designed to function well below -190°C . What is the limiting material in the probe that prevents use at cryogenic temperatures?
Asked by: cold_part_tester2026
Thank you for your inquiry. All of our thermocouples are made with Special Limits of Error (SLE). Special Limits of Error Wire (SLE) made products are only spec’d out for temperatures above 32°F (0°C). So, anything below 32°F (0°C) does not comply with the SLE specification. We don't state an accuracy for SLE Wire-Made Products below 0°C (32°F). Accuracy testing shows it is no longer linear. We cannot certify or guarantee the accuracy for temperatures below 0 C. The thermocouples can still measure temperatures below 0 C but we cannot certify the accuracy.
Answered by: Application Engineer MC
Date published: 2025-04-15
What is the Response time of the TC-NPT series thermocouple?
Asked by: RAJ_Newark
Thank you for your inquiry. Please review this link to our thermocouple response time page: https://www.omega.com/en-us/resources/thermocouples-response-time
Answered by: Application Engineer SP
Date published: 2023-10-09
Is the cable (excluding the leads) IP68 rated (i.e. can the cable be submersed underwater)?
Asked by: Max23
Thank you for your inquiry. No, the cable is not IP68 rated.
Answered by: Application Engineer SP
Date published: 2023-06-13
I have a Pipe Plug Thermocouple Probes with NPT Fitting and Lead Wire. What is the pitch of thread for the 1/8" NPT fitting?
Asked by: Western
The 1/8" NPT on the Pipe Plug Probes has a 0.030704 thread pitch
Answered by: ApplicationEngineerANB
Date published: 2023-10-02
Do these Thermocouples come with a calibration certificate of some kind?
Asked by: TomS
Thank you for your inquiry. No, the standard thermocouple models only come with CAL-1 which is the certificate of conformance. If you need a calibration certificate, you need to add the 3 temperature point calibration service CAL-3 using the configurator on the website.
Answered by: NorwalkAE_SP
Date published: 2025-01-22
Hi - do these thermocouples couple with a certain reader/display/temperature logger? I would ideally want a logger/digital out reading and a digital temp display. Thank you!
Asked by: Jaja
Thank you for your inquiry. Yes. Please take a look at our thermocouple meter/datalogger models HH806AU and OM-HL-EH-TC. FYI these dataloggers will require a miniature male thermocouple connector. For more questions, please call 1-888-826-6342.
Answered by: Application Engineer SP
Date published: 2023-05-16
What is the Nema rating of the probe? What is the Nema rate of the connection point for the probe?
Asked by: PeterV
Thank you for your inquiry. This probe does not have any NEMA ratings.
