Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
TX206TH
Thermistor Temperature Transmitter
Choisissez une variante
Input Type
Remises de volume disponibles
Calendrier de remise sur volume
| Quantité | Prix unitaire |
|---|---|
| 1-4 | C$141.82 |
| 5-9 | C$134.73 |
| 10-24 | C$131.89 |
| 25-49 | C$126.22 |
| 50-99 | C$123.38 |
| 100+ | C$120.55 |
Ajouté à votre panier
Configuration terminée.
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Échec de l'enregistrement des configurations, cliquez sur le bouton Configurer Recommencer
Spécifications du produit
<< Voir toutes les modèles de produits| Brand |
 |
| Accuracy | ± 5 µA |
| Accuracy Note | (mA output/2000) or 5 uA (whichever is the greater) |
| Calibration | Pushbutton/Software |
| Diameter | 43 mm |
| Electrical Connection | Screw Terminal |
| Electrical Output | 4 to 20 mA |
| Height | 21 mm |
| Humidity Range | 10 to 90% RH non condensing |
| Input Accuracy | ± 0.2 % |
| Input Control Signal | N/A |
| Input Type | Thermistor |
| Operating Temperature, Max | 85 °C |
| Operating Temperature, Min | -40 °C |
| Output Detail | 2-wire (4 to 20) mA current loop Maximum Output: 21.5 mA Minimum Output: <3.75 mA |
| Output Load | [(Vsupply-10)/21] kΩ |
| Probe Length | 0 mm |
| Programmable Functions | offset, Range, Sensor Burnout Indication, sensor type |
| Response Time | 1 sec |
| Self Heating Effect | 0.2 uA/V |
| Sensor Type | Transmitter |
| Setup Controls | Pushbutton/Software |
| Sheath Material | N/A |
| Span, Min | 5°C |
| Start Up Time | I out < 4 mA during start up |
| Storage Temperature, Max | 90 °C |
| Storage Temperature, Min | -50 °C |
| Supply Power Type | DC |
| Supply Voltage | 10 to 30 Vdc |
| Temperature Input Range | N/A |
| Thermal Effects | ± 2 uA/°C, ± 0.02 %/°C |
| Thermocouple Type | N/A |
| Warm Up Time | 1 min to full accuracy |
| Weight | 31 g |
| Voir toutes Spécs | |
PDF et manuels
Logiciels et pilotes
Afficher les notes et les avis
Rated 5 out of
5
by
Sarg from
universal generic programmable transmitter
I purchased this with the hope I could program it to my own NTC thermistor which I succeeded in doing with a resistor decade box, power supply, and milliamp meter. It will monitor motor stators on a semi-hermetic compressor. Thermistor transmitters are hard to find. I was lucky to find this one. It can be programmed in less than a minute once you are set up.
Date published: 2019-04-02