Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
TYPE
OMEGAFLEX™ Low Density Polyethylene Tubing
Modèles en stock
- Specific Gravity: .921
- Hardness: 50 Shore D
- Tensile Strength, PSI: 1600
TYPE
Depuis
C$
46.43
Modèles en stock
L'aperçu du produit
- Brittle Temperature -60 °C
- Elongation at Break 500%
- Hardness Durometer 50D
- Materials Polyethylene
- Operating Temperature, Max 60 °C
- Specific Gravity 0.921
- Tensile Strength 1600 psi
Polyethylene tubing is not to be used with barbed fittings due to its tendency to form stress cracks. Use compression-type fittings instead.
Specifications
Specific Gravity: .921
Tensile Strength, psi: 1600 Hardness: 50 Shore D
Elongation at Break, %: 500
Brittle Temperature: -60°C (–76°F)
Maximum Operating Temperature: 60°C (140°F)
Specifications shown are typical and are meant only as a guide. Field testing is recommended to find actual values in the given application.
Note: The listed working pressures are based on a short-term burst using a 4-to-1 safety factor.
Specifications
Specific Gravity: .921
Tensile Strength, psi: 1600 Hardness: 50 Shore D
Elongation at Break, %: 500
Brittle Temperature: -60°C (–76°F)
Maximum Operating Temperature: 60°C (140°F)
Specifications shown are typical and are meant only as a guide. Field testing is recommended to find actual values in the given application.
Note: The listed working pressures are based on a short-term burst using a 4-to-1 safety factor.
Afficher les notes et les avis