Precision DC Gaging Transducers for Quality Control or Automation ToolingLD500LD500
L'aperçu du produit
Additional Features 1
Guaging Transducer
Bandwidth
100 Hz (-3 dB)
Cable Length
2 m
Cable Type
Insulated Shielded
Electrical Output
DC
Input Control Signal
10 to 24 Vdc
Input Current
10 mA
Operating Temperature, Max
80 °C
Operating Temperature, Min
-20 °C
Output Ripple
<1%
Repeatability
<0.15 mm
Temperature Coefficient
Zero : <0.01%/°C;Sensitivity : <0.01%/°C
These precision manufactured LVDT gaging displacement transducers can be mounted to most production lines to do automatic gaging for quality, sorting, or go/no-go applications. The hardened steel shaft, O-ring seals and titanium pushrod can withstand most industrial conditions. The hybrid IC module provides a linear mV/V/mm (or inch) output which will interface with most standard dc input meters, recorders, data interfaces and industrial controllers.
LD500, Can you read the output single ended referenced?
Asked by: FrankD
The LD500 is a 4-wire differential output device. Sensitivity will depend on range you have/choose. All of this information is found on the data sheet including the wiring data. Please contact our Tech Support with any further questions. Thanks! https://br.omega.com/omegaFiles/pressure/pdf/LD500.pdf
Answered by: Jane
Date published: 2023-04-25
How do you convert the output voltage into displacement
Asked by: vchen
The output signal is linear across the -1 mm to +1 mm measurement range of the sensor. If you power the sensor with 10 VDC your output signal will swing from -0.780V at - 1mm to +0.780 V at + 1mm .
Answered by: JK Application Engineer
Date published: 2025-03-08
What is reading resolution of LD-500-2.5? I want to use them for sorting of precision steel ball with 0.1 um dimensional accuracy
Asked by: Mohammad Danaie
According to the datasheet the specs for LD500-2.5. Repeatability <0.15 mm. Lin: 0.25%. In theory, an LVDT has infinite resolution, but in practice, the resolution is limited by the signal-to-noise ratio of the system and the external output electronics.
