1-800-663-4209 | Vos commentaires sont importants, répondez à un sondage rapide commentaires sur le site web
NB1-RP-REPLACE-PROBE
Sondes thermocouple de rechange 1/2" x 1/2" NPTet fils de liaison de Ø 0,8mm
Modèles en stock
- Wide Variety of Wire Types Available
- J, K, T, E, N, Calibration Types
- User Selectable Diameter and Length
- Made with Special Limits of Error Wire
NB1-RP-REPLACE-PROBE
Depuis
C$
125.42
Modèles en stock
L'aperçu du produit
- Additional Features 1 Replacement Probes
- Cable Length 40 in
- Process Connection Size 1/2 in
- Process Connection Type NPT Male
- Process Temperature, Min 0 °C
- Temperature Sensor Type Thermocouple
- Wire Gauge 20 AWG
- Wire Type Stranded
Flexible lead wire replacement probe is ideal for field installation with existing protection heads or for extending leads to remote locations. Flexible leads prevent breakage in hard to wire situations. Provided with 20 AWG stranded lead wire and 1/2 x 1/2 NPT hex fitting. Probe length includes 1/2" of hex fitting threads. Convenient sizes listed in the "To Order" box or use the Part Number Builder below.
View the Thermocouple Accuracy and Color Code charts
View the Thermocouple Accuracy and Color Code charts
Probes less than 48 inches in length are shipped 'straight'. Probes equal to or greater than 48 inches in length are shipped 'coiled'. If a probe that is 48 inches or longer must ship straight, please add "-SST" to the end of the part number, and add $75.00 to the price of the probe. Maximum ship straight length is 96 inches. Additional shipping fees from carrier may also apply for non-standard length packaging.
PDF et manuels
Afficher les notes et les avis
Rated 3 out of
5
by
Nathan DCS from
Short cable
Thermal couple cable was 4 inch short of described in length.
Date published: 2023-12-01
Rated 5 out of
5
by
DanielJ from
Easy to install
The Thermocouple was compatible with the controller I intended to use, the installation was easy and it works pretty well. It gives accurate readings and was exactly what I needed.
Date published: 2023-01-16
Rated 5 out of
5
by
Optimisation SM from
Thermoprobe
Works perfectly , clean finish and easy to install
Date published: 2021-06-29
Rated 5 out of
5
by
Nimin from
Plug and play thermocouple
Pretty accurate thermocouple. Easy 2 wire connection. Would have been better if it mentioned somewhere the polarity of the colored wires.
Date published: 2021-04-04
Which thermowell should I choose to use with a thermocouple with the following specifications? Process Connection Size Process connection size: 1/2" NPT Probe Diameter: 0.25 in Probe Length: 2 in
The only Thermowell available for 2" probes is the 260A series however it has a 3/4" NPT process connection thread.
Date published: 2021-08-21
Our application is to measure temperature up to 750 deg. C in a vessel filled with Hydrogen at 30 bar pressure. We are considering using: Item# NB1-CAIN-14U-12RP-TT36. Is it the correct choice ?
Hi Ehud
Thank you for the inquiry. This probe series is not pressure rated due to the temperature ranges it may be exposed to. Recommend a thermowell rated for high temperature hydrogen service for this application. Omega does not currently offer compatible thermowell. Please contact our temperature engineering for more details at TEMP@OMEGA.COM
Best regards
OMEGA
Date published: 2021-09-16
Does this required a protection head? Or can it be inserted directly into a gas stream. I would like to tap a hole in a manifold plate and insert this probe into the gas stream. I would like the fast responding probe I can find. I also like the short leng
Thank you for your inquiry. This item does not require a protection head.
Date published: 2021-08-18