Rugged RTD Probe with Insulated Wire and Metal Strain ReliefPR-11PR-11
L'aperçu du produit
Accuracy
Class A
Nominal Resistance/Curve Note
High-Accuracy, Wire Wound 100 Ω, Class “A” DIN Platinum Elements per IEC 751 (alpha = 0.00385 Ω/Ω/ºC)
Probe Type
RTD Probe Transitions with Metal Strain Relief
Process Temperature, Max
600 °C
Process Temperature, Min
-200 °C
Sheath Material
304 Stainless Steel
Temperature Coefficient
0.00385Ω/Ω/°C
Temperature Coefficient Note
α=0.00385Ω/Ω/°C
Temperature Probe Style
Immersion Probe
Temperature Sensor Type
RTD
Transition Joint Length
1.125 in
Wire Gauge
26 AWG
Wire Type
Stranded
A general purpose RTD probe with transition style junction. Comes with 36' PFA coated lead wires. Standard probe lengths are 6, 12, 18, 24 inch. Standard diameters are 1/16, 1/8, 3/16, 1/4 inch. Stripped end termination is standard. For additional lead length over 36', add $2.25 per foot (Style 2 and 3) and $1.40 per foot (Style 1). Non-standard probe lengths are available, consult Sales Department. PFA coating and dual sensor probes are also available on request.
Examples of pricing for popular models is referenced in the 'To Order' box. Use the 'Part Number Builder' below to get pricing for all available models.
Rated 3 out of
5 by
Drag from
Good, but fragileThe first one i bought became intermittent after a couple weeks of use. It has a couple of shallow clamp marks from the pass thru fitting and a slight bend to it, but it seems that was enough to do it in.
Bought another and was particularly careful with it, finished testing, still good.
Accurate and responsive, but fragile.
Date published: 2017-06-05
Rated 5 out of
5 by
Dconky from
great productperfect size for our needs..quickly ordered and shipped
Date published: 2023-04-14
Rated 5 out of
5 by
SDBB from
Great ProbeProbe is working great if not bumped against hard object, or terminals soldering is bad to inside the connector. I am not letting anybody else to use that probe to avoid unnecessary breakage and replacement. It is so delicate. Some of them are working great for a long time. Some do not stand to the next calibration date.
Date published: 2020-09-04
Rated 5 out of
5 by
10 pin from
Great QualityWe have used these for years. They work well and are quite durable.
Date published: 2018-09-25
Rated 5 out of
5 by
lbrvivas from
Good productI bought one and it´s very well, the delivery was very quick and the product was perfect.
I purchased 5 of RTDs PR-11-2-100-1/8-6-E. The temperature readings were 5-9 degC out when connected to CS8DPT controller. Are these RTD need to be calibrated separately? what are Calibration options? calibration frequency?
Asked by: nghige
Thank you for your inquiry. Please contact our Temperature Department or email your questions to temp@omega.com
Answered by: Application Engineer JB
Date published: 2020-12-02
Hi, is this product's probe waterproof?
Asked by: ahnka
Thank you for your inquiry ahnka. Yes, only the sheath itself is waterproof. The transition joint is not waterproof.
Answered by: Application Engineer SP
Date published: 2022-07-28
What is the tolerance on the sheath outer diameter? I have PR-11-2-100-1/16-6-E and it will be inserted in stainless steel 316 with hole at 0.066" hole +/- 0.005". With calipers I get 0.063" consistently along probe length.
Asked by: Nando
Thank you for your inquiry. The sheath tolerance for a 1/16" diameter probe is ±0.001.
Answered by: Application Engineer CB
Date published: 2022-11-29
I configured an RTD and this is the part number the configurator gave me PR-11-2-100-1-8-4-E-SB-120. What does the -SB mean?
Asked by: markgold
This means the Steel Braid additional feature. Please feel free to contact our Tech Support any time if you have any further questions. Thank you!
Answered by: Jane
Date published: 2020-09-14
Two questions:
1) Are these compatible with Swagelok compression fittings (on the probe)?
2) Are these bendable at all (even 5-10 deg)?
Asked by: SwagelokFan
Thank you for your inquiry SwagelokFan. For the compression fitting to work with the probe the inner diameter of the fitting must match the diameter of the probe. Unfortunately, they are not bendable.
