Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
ILD44-UTP-C4EI
Large Display Meters & PID Controllers
Choisissez une variante
Data Interface
Remises de volume disponibles
Calendrier de remise sur volume
| Quantité | Prix unitaire |
|---|---|
| 1-4 | C$2 677.90 |
| 5-9 | C$2 544.01 |
| 10-24 | C$2 410.11 |
| 25-49 | C$2 276.22 |
| 50-99 | C$2 142.32 |
| 100+ | C$2 008.43 |
Ajouté à votre panier
Configuration terminée.
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Échec de l'enregistrement des configurations, cliquez sur le bouton Configurer Recommencer
Spécifications du produit
<< Voir toutes les modèles de produits| Brand |
 |
| A/D Conversion | Dual slope |
| Accuracy | ± 0.5 °C |
| Accuracy Note | ±0.5°C temperature; 0.03% rdg |
| Alarm modes | Band, High/Low, Latch/Unlatch, Normally Open/Closed, Process/Deviation |
| Common Mode Rejection | 120 dB |
| Control Mode | Reverse (heat) or direct (cool) |
| Current Measurement Range | 0 to 20 mA |
| Data Interface | Ethernet, RS485, RS422 |
| Data Interface Note | Ethernet : Standards compliance IEEE 802.3 10Base-T Supported Protocols : TCP/IP, ARP, HTTPGET RS232/RS422/RS485/MODBUS : Selectable from menu; both ASCII and MODBUS protocol selectable from menu; programmable 300 to 19.2 K baud; complete programmable setup capability; program to transmit current display, alarm status, min/max, actual measured input value and status. RS485 : Screw terminals |
| Decimal Selection | 0, 0,001, 0,01, 0,1 |
| Digital Filter | Programmable |
| Display Color | Red, Green, Amber |
| Display Size | 57.2 mm (2.25 in) |
| Display Type | 4 Digit, 7 Segment LED |
| Display Type Note | 4-digit or 6-digit, 7-segment LED 57.2 mm (2.25") or 101.6 mm (4.00") red, green and amber programmable colors for process variable, set point and temperature units |
| Electrical Connection | Screw Terminal |
| Enclosure Ratings | IP65, NEMA Type 4 |
| Excitation Voltage Note | Optional in Place of Communication |
| Impedance Input | 10 MΩ for 100 mV, 1 MΩ for 1 or 10 Vdc |
| Input Configuration | Single-ended |
| Input Type | Themocouple, RTD, Current, Voltage |
| Isolation | Power to Input/Output: 2300 Vac per 1 min test (RS232/485, input or output) Between Inputs: 500 Vac per 1 min test |
| Normal Mode Rejection | 60 dB |
| Offset Adjustment | -1999 to +9999 |
| Operating Temperature, Max | 40 °C |
| Operating Temperature, Min | 0 °C |
| Polarity | Unipolar |
| Power Consumption | 22.5 W |
| RTD Type | 100/500/1000 Ω Pt sensor, 2-, 3- or 4-wire; α= 0.00385 or 0.00392 |
| Reading Rate | 3 samples/sec |
| Relative Humidity | 90% RH non-condensing |
| Resolution | 1°/0.1°; 10 µV process |
| Sensor/Transmitter Power | 24 Vdc @ 25 mA |
| Set Point Adjustment | -1999 to 9999 counts |
| Span Adjustment | 0.001 to 9999 counts, programmable |
| Step Response | 0.7 sec for 99.9% |
| Supply Power Note | 100 to 240 Vac ±10%, 50/60 Hz |
| Supply Voltage | 100 to 240 Vac |
| Temperature Stability | RTD: 0.04°C/°C;Thermcouple @ 25°C (77°F): 0.05°C/°C—cold junction |
| Thermocouple Lead Resistance, Max | 100 Ω |
| Thermocouple Type | J, K, T, E, R, S, B, C, N, L |
| Voltage Measurement Range | 0 to 100 mV, 0 to 1 V, 0 to 10 Vdc |
| Warm-Up to Rated Accuracy | 60 min |
| Voir toutes Spécs | |
PDF et manuels
Afficher les notes et les avis