Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
HANI-C-2.0S-M-MA
0 to 100°C, 4-20 mA 2.0" Sanitary Metal Pipe
Remises de volume disponibles
Calendrier de remise sur volume
| Quantité | Prix unitaire |
|---|---|
| 1-4 | C$1,045.81 |
| 5-9 | C$993.52 |
| 10-24 | C$941.23 |
| 25-49 | C$888.94 |
| 50-99 | C$836.65 |
| 100+ | C$784.36 |
Ajouté à votre panier
Configuration terminée.
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Échec de l'enregistrement des configurations, cliquez sur le bouton Configurer Recommencer
Spécifications du produit
<< Voir toutes les modèles de produits| Brand |
 |
| Accuracy | ± 0.5 °C (± 0.9 °F) |
| Applications | Food and Beverage, Medical, Pharmaceutical |
| Base Mounting | Metal Pipe |
| Electrical Connection | M12 8 pin Female |
| Enclosure Ratings | IP65 |
| Height | 2.03 in |
| Length | 2.53 in |
| Loop Resistance | (Vsupply -8V)/0.24 A |
| Materials | Nylon, Silicone, Brass, Stainless Steel |
| Media Compatibility | Water, Water-based fluids |
| Mounting | Clamp |
| Operating Temperature, Max | 40 °C |
| Operating Temperature, Min | 0 °C |
| Output Detail | 4 to 20 mA User scalable analog output, default scaling 0-100°C |
| Output Signal | Current |
| Pipe Size, Max | 2 in |
| Process Temperature, Max | 100 °C |
| Process Temperature, Min | 0 °C |
| Response Time | t63: 5 sec ; t90: 10 sec |
| Supply Power Note | 8 Vdc - 28 Vdc (Loop powered) |
| Supply Voltage | 8 to 28 Vdc |
| Width | 2.38 in |
| Voir toutes Spécs | |
PDF et manuels
Logiciels et pilotes
Afficher les notes et les avis
Rated 5 out of
5
by
Stephen Baughman from
So easy to install!
We have been using in line RTD's and thermocouplers for years, this product has given us the flexibility of where to monitor temps without the costly modifications and downtime of moving a fitting for our existing products, and then the cost of having to rewire them if needed. So worth it to switch!
Date published: 2021-07-22
Rated 5 out of
5
by
Maintenance Manager from
Wonderful Product!
Hooking up the Hani Clamp to the pipe literally took 2 seconds- placed the unit on the pipe, took the band around the pipe and clasped it. It hugged the pipe just like it was made for it - because it was!
It is a pleasure using this instrument.
The readings are dead on accurate.
We were able to get the readings on a laptop since we chose not to use the 4 to 20 mA feature.
It is the best and as far as we know the only product available for taking non intrusive temperature readings from stainless pipes.
Date published: 2021-07-06
Rated 5 out of
5
by
Eric A from
Expertly-Designed, Robust Sensor
This non-invasive is a joy to work with right out of the box. Within two minutes I had the software downloaded, the sensor/clamp in place, and was reading temps; more accurately than and faster than the device installed in parallel I should add. Putting the device through its paces, it’s water tight, chemical resistant, and to some degree fall proof - though I didn’t feel like dropping it from very high to test this theory. From a sanitary perspective I enjoy that this sensor is non invasive, the brewery industry must maintain sanitary practice; any chance to remove something from a sanitary pathway - I take it. The HANI is now my go-to audit sensor around the brewery. I’ve also had nothing but superior customer service from Omega, their entire team top to bottom is a pleasure to work with.
I felt like a device seemingly so simple like this should already exist but it doesn’t. Bravo Omega. You truly are sensing great things. Will buy again and again.
Date published: 2021-07-22
Rated 5 out of
5
by
Anonymous from
Very good product
The customer found the operation to measure the temperature with the software very easy. he didn't know this kind of product.
Date published: 2022-01-26