Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
ACC103-series
Accelerometers Laboratory Grade for High Vibration Levels
- 10 mV/g Output to 500 g's
- Ideal for Laboratory Shake Testing
- High Shock/Acceleration Range up to ±500 g’s
- Fast Turn-on Time (1 Sec.)
L'aperçu du produit
The ACC103 laboratory accelerometer is ideal for use in shake tests, vibration labs, and other general purpose vibration applications. The ACC103 weighs only 15 grams, ideal for applications where low accelerometer weight is critical. It has a 10 mv/g output which can measure vibrations up to 500 g's.
SPECIFICATIONS
Frequency Response: 1 Hz to 10 kHz (up to ±10% rated output shift)
Rated Output: 10 mV/g nominal @ 100 Hz
Frequency Range: 2 Hz to 10 kHz (up to ±5% rated output shift)
Amplitude Range: ±500 g peak
Amplitude Linearity: ±2% up to 500 g peak
Temperature Range: -50 to 120°C (-60 to 250°F)
Temperature Sensitivity Effect: 0.06% FS/°F
Discharge Time Constant: 0.5 s min
Transverse Sensitivity: 5% of axial max
Strain Sensitivity: 0.001 g per microstrain @ 25°/µσ
Maximum g Without Clipping: ±1000 g
Mounted Resonance Frequency: >40 kHz
Output Impedance: 100 Ω
Bias Voltage: 10V nominal
Base Strain: 0.03 g/microstrain nominal
Noise Floor (Wideband): 0.007 g (rms)
Weight: 1.5 g (0.05 oz) nominal (without cable)
Material: Stainless steel
Dimensions: 7.11 H x 6.35 mm hex base (0.28 x 0.25')
Connector: 10-32 male, cable not included (order model no. ACC-CB2-10)
SPECIFICATIONS
Frequency Response: 1 Hz to 10 kHz (up to ±10% rated output shift)
Rated Output: 10 mV/g nominal @ 100 Hz
Frequency Range: 2 Hz to 10 kHz (up to ±5% rated output shift)
Amplitude Range: ±500 g peak
Amplitude Linearity: ±2% up to 500 g peak
Temperature Range: -50 to 120°C (-60 to 250°F)
Temperature Sensitivity Effect: 0.06% FS/°F
Discharge Time Constant: 0.5 s min
Transverse Sensitivity: 5% of axial max
Strain Sensitivity: 0.001 g per microstrain @ 25°/µσ
Maximum g Without Clipping: ±1000 g
Mounted Resonance Frequency: >40 kHz
Output Impedance: 100 Ω
Bias Voltage: 10V nominal
Base Strain: 0.03 g/microstrain nominal
Noise Floor (Wideband): 0.007 g (rms)
Weight: 1.5 g (0.05 oz) nominal (without cable)
Material: Stainless steel
Dimensions: 7.11 H x 6.35 mm hex base (0.28 x 0.25')
Connector: 10-32 male, cable not included (order model no. ACC-CB2-10)