Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
NB1-RP-REPLACE-PROBE
Sondes thermocouple de rechange 1/2" x 1/2" NPTet fils de liaison de Ø 0,8mm
Modèles en stock
- Gamme étendue de fils
- Thermocouples J, K, T, E ou N
- Large choix de diamètres et de longueurs de sonde
- Classe 1 de précision (SLE)
NB1-RP-REPLACE-PROBE
Depuis
C$
122.84
Modèles en stock
L'aperçu du produit
- Additional Features 1 Replacement Probes
- Cable Length 40 in
- Process Connection Size 1/2 in
- Process Connection Type NPT Male
- Process Temperature, Min 0 °C
- Temperature Sensor Type Thermocouple
- Wire Gauge 20 AWG
- Wire Type Stranded
Description
Les sondes NB1-RP conviennent parfaitement à l'installation sur place dans une tête de raccordement et un doigt de gant en remplacement d'une sonde défectueuse. Réalisées avec des fils souples multi brin de Ø 0,8mm et un double filetage NPT de ½ pouce, ces sondes sont proposées avec la longueur et le diamètre requis pour une parfaite adaptation.Les prix des modèles les plus courants sont donnés dans le tableau "Pour commander". Utilisez la table de "Construction d'une référence" ci-dessous pour déterminer le prix des autres modèles.
Pour obtenir les caractéristiques complètes de ces produits, consultez la notice commerciale par le lien en bas de cette page.
PDF et manuels
Afficher les notes et les avis
Rated 3 out of
5
by
Nathan DCS from
Short cable
Thermal couple cable was 4 inch short of described in length.
Date published: 2023-12-01
Rated 5 out of
5
by
DanielJ from
Easy to install
The Thermocouple was compatible with the controller I intended to use, the installation was easy and it works pretty well. It gives accurate readings and was exactly what I needed.
Date published: 2023-01-16
Rated 5 out of
5
by
Optimisation SM from
Thermoprobe
Works perfectly , clean finish and easy to install
Date published: 2021-06-29
Rated 5 out of
5
by
Nimin from
Plug and play thermocouple
Pretty accurate thermocouple. Easy 2 wire connection. Would have been better if it mentioned somewhere the polarity of the colored wires.
Date published: 2021-04-04
Which thermowell should I choose to use with a thermocouple with the following specifications? Process Connection Size Process connection size: 1/2" NPT Probe Diameter: 0.25 in Probe Length: 2 in
The only Thermowell available for 2" probes is the 260A series however it has a 3/4" NPT process connection thread.
Date published: 2021-08-21
Our application is to measure temperature up to 750 deg. C in a vessel filled with Hydrogen at 30 bar pressure. We are considering using: Item# NB1-CAIN-14U-12RP-TT36. Is it the correct choice ?
Hi Ehud
Thank you for the inquiry. This probe series is not pressure rated due to the temperature ranges it may be exposed to. Recommend a thermowell rated for high temperature hydrogen service for this application. Omega does not currently offer compatible thermowell. Please contact our temperature engineering for more details at TEMP@OMEGA.COM
Best regards
OMEGA
Date published: 2021-09-16
Does this required a protection head? Or can it be inserted directly into a gas stream. I would like to tap a hole in a manifold plate and insert this probe into the gas stream. I would like the fast responding probe I can find. I also like the short leng
Thank you for your inquiry. This item does not require a protection head.
Date published: 2021-08-18