Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
PRTXI
Industrial RTD Probe with IO-Link, 4 to 20 mA, and Switched Output
Modèles en stock
- IO-Link capable switching output and a 4-20mA analog output
- Scalable temperature range from -50 to 200°C (-58 to 392°F)
- Designed for industrial applications
- Rugged 316L Stainless Steel housing with a variety of threaded process connections and probe lengths
PRTXI
Depuis
C$
356.12
Modèles en stock
L'aperçu du produit
- Accuracy Class A
- Accuracy Note Full Measuring Range ± 0.55 °C (0.99°F) Scaled Measuring Range ± [0.215 °C (0.39 °F) + 0.134 % x (Measuring Span)]
- Certifications CE, UKCA
- Data Interface IO-Link
- Electrical Output 4 to 20 mA
- Enclosure Ratings IP67, IP68, IP69K
- Enclosure Ratings Note 316L Stainless Steel, IP67/IP68/IP69K rated
- Operating Temperature, Max 85 °C
- Operating Temperature, Min -40 °C
- Operating Voltage, Max 30 VDC
- Operating Voltage, Min 15 VDC
- Operating Voltage Note 15 to 30 VDC (IO-Link/Switch); 10 to 30 VDC (Analog)
- Output Note IO-Link Communication / PNP Switch (200 mA) / Analog 4-20 mA
- Process Temperature, Max 200 °C
- Process Temperature, Min -50 °C
- RTD Type 100 Ω Pt Sensor
- Sheath Material 316L Stainless Steel
- Temperature Sensor Type RTD
- Thermocouple Type N/A
The Omega PRTXI series of temperature transmitters are IO-Link capable for reliable, bi-directional, point to point communication for process data and sensor configuration; Also equipped with a scalable 4-20mA analog output and a switched output that can handle current draws up to 200mA. These sensors utilize a PT100 Class A RTD element to provide an accuracy of +/- 0.55°C throughout the entire measuring range of -50...+200°C (-58...+392°F). Made with a fully welded 316L Stainless Steel housing, the sensor has excellent corrosion resistance and is IP69K rated. Available in standard lengths from 2" to 12", with probe diameters of 1/8", 3/16", and 1/4", and both G and NPT process connections of 1/4", 3/8", and 1/2".
PDF et manuels
Logiciels et pilotes
Afficher les notes et les avis
2 part question about the PRTXI. 1. Is it possible to scale the 4-20mA transmitter and set up the PNP switch OTHER THAN THOUGH io-link? e.g. is there PC software/ USB lead? Under "Manuals & Downloads" there is software, but there's only 4 jpg's & 1 XML
Thank you for the inquiry. Unfortunately this device has only the IO Link and mA out operating modes. Details in the "Manuals & Downloads" are used with IO Link set up.
Best regards
OMEGA
Date published: 2024-11-01
