Sondes Thermocouples Avec Tête de Protection IndustriellesNB1-ICIN-INDUST-TCNB1-ICIN-INDUST-TC
Vous ne trouvez pas le bon modèle ?
Utilisez notre configurateur personnalisé pour affiner votre produit
Configuration terminée. Veuillez ajouter au panier pour la conserver ou quitter la configuration
Échec de l'enregistrement des configurations, cliquez sur le bouton Configurer Recommencer
L'aperçu du produit
Process Connection Size
1/2 in
Process Connection Type
NPT Male
Process Temperature, Min
0 °C
Temperature Sensor Type
Thermocouple
Description
Ces ensembles thermocouples industrielles sont fabriqués à partir de câble isolant minéral (MI) de tolérance de la Class 1. La gaine semi-rigide peut être déformée, la gaine de minéral courbé pour répondre à de nombreuses applications. Ces modèles offrent une grande variété de têtes de protection et raccordements de process pour satisfaire les exigences d'environnement de la plupart des applications. Ils sont équipés en standard d'une process de raccordement 1/2 BSPT (R1/2), consultez le PDF ou la table de "Construction de référence" ci-dessous pour savoir comment spécifier le filetage de process de G1/2 ou G1/4.
Les exemples des prix des modèles les plus courants sont donnés dans le tableau "Pour Commander". Utilisez la tableau de "Construction d'une Référence" ci-dessous pour déterminer le prix des autres modèles. Pour obtenir les caractéristiques complètes de ces produits, consultez le PDF "Specifications" dans "Liens Associés- Produits Reliés" ci-dessous.
Thank you for your inquiry JohnW. We don't have a manual for this thermocouple. We only have the data sheet. Here is the link to the data sheet: https://assets.omega.com/pdf/test-and-measurement-equipment/temperature/sensors/thermocouple-probes/NB1-ICIN_INDUST_TC.pdf
Answered by: Application Engineer SP
Date published: 2021-09-16
CAN YOU USE REGULAR 1PR 16 FROM RTD TO CONTROLL PANEL
Asked by: JIMBO76
Thank you for your inquiry JIMBO76. I’m not clear on what you are asking. This is a thermocouple and it seems like you are asking about an RTD. If you are asking about the compatibility of an RTD or a thermocouple with a controller, it would depend on the individual controller. If this didn’t answer your question or if you have any further questions please call us at 1-888-826-6342
Answered by: Application Engineer SP2
Date published: 2022-01-20
Would this be a 4-20 ma signal?
Asked by: BobbyG
Thank you for your inquiry BobbyG. The NB2-ICSS-14U-12's output is in mV. You can get an output in mA if you connect this probe to a transmitter like the TX93-K2 whose output is in mA.
Answered by: Application Engineer MC
Date published: 2024-05-05
What is the input voltage requirement for the thermocouple?
Asked by: SB16
Thank you for your inquiry SB16. There is not fixed voltage value for thermocouples because the voltage changes as the temperature increases or decreases. The term "input voltage" does not apply to a thermocouple as it is a self-powered device.
Answered by: Application Engineer MC
Date published: 2024-05-05
Where can I find resolution or accuracy values for any product? Its not given in the tech datasheet.
Asked by: rahul
Hi Rahul,
The data sheet includes a note at the top right indicating the probes meet or exceed SLE specification. For details on thermocouple SLE;
https://www.omega.com/en-us/colorcodes
Resolution is determined by the measuring instrument since the output is a micro volt level signal generated by thermocouple effect.
Best regards,
OMEGA
Answered by: NorwalkAE_RS
Date published: 2023-12-11
How can I check calibration?
Asked by: Bulldogs
Thank you for your inquiry. Please you can order these parts with calibration using the CONFIGURATE NOW button.
Answered by: CB Engineer
Date published: 2021-05-28
What device can I use to get temperature readings from an NB2-ICSS-14U-4 thermocouple? If I can use a multimeter to get a reading then how do I translate that reading to a temperature?
Asked by: Micahman
Thank you for your inquiry. We believe the best assistance would come from speaking to us directly at 888-826-6342 ask for the Temperature Department Mon. – Fri. (HOURS 8:00AM - 5:30PM EST).
Answered by: Application Engineer CB
Date published: 2023-07-17
What is the accuracy and resolution of thermocuple model NB12-CPSS-14G-6?
Asked by: rahul
Thank you for your inquiry. NB12-CPSS-14G-6 does not have resolution, the accuracy is +/- 0.5°C or 0.4%, whichever is greater.