Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
CHAL-020-BW
Butt-Welded Unsheathed Fine Gage Microtemp Thermocouples

Choisissez une variante
Temperature Sensor Type
Remises de volume disponibles
Calendrier de remise sur volume
Quantité | Prix unitaire |
---|---|
1-9 | C$64.49 |
10-24 | C$61.27 |
25-99 | C$58.04 |
100-499 | C$54.82 |
500-999 | C$51.59 |
1000+ | C$48.37 |
Ajouté à votre panier
Configuration terminée.
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Échec de l'enregistrement des configurations, cliquez sur le bouton Configurer Recommencer
Spécifications du produit
<< Voir toutes les modèles de produitsBrand |
![]() |
Additional Features 1 | Butt Welded |
Alloy Material (+) | Chromel |
Alloy Material (-) | Alumel |
Cable Diameter | 0.02 in |
Cable Length | 12 in |
Electrical Connection | Stripped Leads |
Junction Type | Exposed |
Pack Size | 5 |
Process Temperature, Max | 871 °C |
Process Temperature, Min | 0 °C |
Temperature Sensor Type | Thermocouple Type K |
Wire Gauge | 24 AWG |
Voir toutes Spécs |
PDF et manuels
Afficher les notes et les avis
Rated 5 out of
5
by
Anonymous from
Excellent quality butt-welded thermocouples
These thermocouples are very well made and very well packaged. So far I've used about 20 of the 40AWG K-type variant and the consistency is very good. My only issue with using these has been determining the exact location of the weld, since the wire is so fine and the bulge where the junction is welded is so minimal (this is probably less of a problem with larger wire). They do coat the wire with a red varnish where the junction is, but the coated length is 1-2 cm long, so it's easy to find roughly where the junction is, but I needed to locate the junction within 1mm. It was still possible, just difficult. I don't think this is a fault in the product, its just the nature of working with such fine thermocouples.
Date published: 2024-08-09