Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
TX12
RTD In-Head Temperature Transmitter
Choisissez une variante
Input Type
Remises de volume disponibles
Calendrier de remise sur volume
| Quantité | Prix unitaire |
|---|---|
| 1-4 | C$163.55 |
| 5-9 | C$155.37 |
| 10-24 | C$152.10 |
| 25-49 | C$145.56 |
| 50-99 | C$142.29 |
| 100+ | C$139.02 |
Ajouté à votre panier
Configuration terminée.
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Échec de l'enregistrement des configurations, cliquez sur le bouton Configurer Recommencer
Spécifications du produit
<< Voir toutes les modèles de produits| Brand |
 |
| Accuracy | ± 5 µA |
| Accuracy Note | (mA output/2000) or 5 uA (whichever is the greater) |
| Approvals | BS EN 61326 ; 1998 – Electrical equipment for measurement and control ANNEX A ; ANNEX F |
| Calibration | Pushbutton |
| Diameter | 43 mm |
| Electrical Connection | Screw Terminal |
| Electrical Output | 4 to 20 mA |
| Height | 21 mm |
| Humidity Range | 10 to 90% RH non condensing |
| Input Accuracy | ± 0.1 °C |
| Input Control Signal | N/A |
| Input Type | RTD |
| Lead Resistance, Max | 20 Ω per leg |
| Lead resistance effect | 0.002°C/Ω |
| Operating Temperature, Max | 85 °C |
| Operating Temperature, Min | -40 °C |
| Output Detail | 2 wire, 4 to 20 mA current loop Maximum Output: 21.5 mA (in high burnout condition) Minimum Output: 3.8 mA (in low burnout condition) |
| Output Load | [(Vsupply-10)/20] kΩ |
| Probe Length | 0 mm |
| Programmable Functions | offset, Range, Sensor Burnout Indication |
| RTD Type | Pt100 |
| Response Time | 1 sec |
| Self Heating Effect | 0.2 uA/V |
| Sensor Type | Transmitter |
| Setup Controls | Pushbutton, Program LED will flash in bursts |
| Sheath Material | N/A |
| Span, Min | 25°C |
| Start Up Time | I out < 4 mA during start up |
| Storage Temperature, Max | 90 °C |
| Storage Temperature, Min | -50 °C |
| Supply Current | <200 µA |
| Supply Power Type | DC |
| Supply Voltage | 10 to 30 Vdc |
| Temperature Coefficient | 0.00385 Ω/°C |
| Temperature Input Range | -200 to 850°C |
| Thermal Effects | 1 uA/°C, 25 ppm/°C |
| Thermocouple Type | N/A |
| Update Rate, Max | 500 ms |
| Warm Up Time | 1 min to full accuracy |
| Weight | 31 g |
| Wiring/Connector Table | 2- or 3-Wire |
| Voir toutes Spécs | |
PDF et manuels
Afficher les notes et les avis
Rated 5 out of
5
by
schlott from
TX12 rtd amplifier digital adjust zero and span
We used these rtd amplifiers periodically to integrate into systems for resale. I find them superior because we can adjust the zero and span over a wide range of temperatures for various system needs with a relatively simple setting procedure - unlike other types which have a very narrow adjustment band. We use a simple fixed resistance reference set and get accuracy better than +-.25 deg C accuracy with our thin film rtds.
Date published: 2016-02-26
Rated 5 out of
5
by
Mitch33 from
Fast support and shipping!
Omega got me out of a jam with this transmitter. It worked great. Easy to program
Date published: 2020-05-19