Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
FPR207
Liquid Flow Transmitters With Visual Indication
Choisissez une variante
Volumetric Flow Rate, Min
Ajouté à votre panier
Configuration terminée.
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Échec de l'enregistrement des configurations, cliquez sur le bouton Configurer Recommencer
Spécifications du produit
<< Voir toutes les modèles de produits| Brand |
 |
| Accuracy | ± 0.02 % |
| Cable Length | 10 m |
| Display Type | None |
| Electrical Connection | Cable |
| Electrical Output | 4 to 20 mA |
| Height | 2.63 in |
| Length | 3.7 in |
| Material Construction Option | No Visual Indicator |
| Materials | Stainless Steel, Epoxy, Nylon, PVC |
| Materials, Wetted | 316 SS, Acetal Copolymer, Buna-N (NBR), EPR, FKM, PEEK, Polycarbonate |
| Media Compatibility | Liquids |
| Operating Pressure, Max | 500 psi |
| Output Detail | Load Driving Capacity: 1150 Ω max |
| Output Signal | Current |
| Process Connection Size | 1 in |
| Process Connection Type | NPT Female |
| Repeatability Error | 0.005 |
| Response Time | 2 sec |
| Response Time Note | 2 s to 90% (step change in flow rate) |
| Supply Voltage | 12 to 35 Vdc |
| Switch Rating | 5 A @ 120/240 Vac |
| Type of Operation | Sensor Transmitter |
| Viscosity Range | 0 to 5 cPs |
| Volumetric Flow Rate, Max | 189.3 l/min |
| Volumetric Flow Rate, Min | 18.9 l/min |
| Width | 2.45 in |
| Voir toutes Spécs | |
PDF et manuels
Afficher les notes et les avis
Rated 1 out of
5
by
wilson91 from
Design needs improvement
Have gone through 3 or 4 of these in under 2 years. After a very short period of use the wheel inside loosens up and gets caught up which slows the speed of it and gives an incorrect flow. This has happened on every one of these we have bought and it is clearly a poor design
Date published: 2020-07-20
Rated 1 out of
5
by
curtisr1 from
The worst
This is the most stupidly designed flowmeter ever. The wire harness is within about 1/16 inch of one of the water fitting. Virtually any water fitting I tried to put onto the flow meter body would not screw on because of interference witht he wiring harness. I just took vise grips and removed the wiring harness and when I removed it all the wires inside inside were sheared off. Dead as a doornail just like that.
Date published: 2019-01-30
Rated 5 out of
5
by
Zach Sedahl from
Easy & Convenient
Transmitter can work in countless industries and has high accuracy.
Date published: 2024-10-30