Welcome to our new website, found an issue or bug? Please report it here
MDSSI8-RTD-EIT-AL
Choose a Variant
Input Type
Volume discounts available
Volume Discount Schedule
| Quantity | Price each |
|---|---|
| 1-4 | C$1,320.00 |
| 5-9 | C$1,254.00 |
| 10-24 | C$1,188.00 |
| 25-49 | C$1,122.00 |
| 50-99 | C$1,056.00 |
| 100+ | C$990.00 |
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
Product Specs
<< See all Product Models| Brand |
 |
| A/D Conversion | Dual slope |
| Accuracy | ± 0.4 °C |
| Accuracy Note | RTD (Pt, 0.00385, 100, 500, 1000 Ω) : 0.4°C, RTD (Pt, 0.00392, 100, 500, 1000 Ω) : 0.4°C |
| Additional Features 1 | Benchtop Enclosure |
| Common Mode Rejection | 120 dB |
| Control Output | 2 SPDT Relay |
| Current Measurement Range | 0 to 20 mA |
| Data Interface | RS232, RS422, RS485 |
| Data Interface Note | RS232/RS422/RS485: Selectable from menu; both ASCII and MODBUS protocol selectable from menu; programmable 300 to 19.2 Kb; complete programmable setup capability; program to transmit current display, alarm status, min/max, actual measured input value and status Selectable from menu; both ASCII and MODBUS protocol selectable from menu; programmable 300 to 19.2 Kb; complete programmable setup capability; program to transmit current display, alarm status, min/max, actual measured input value and status RS485: Addressable from 0 to 199 |
| Decimal Selection | 0, 0,001, 0,01, 0,1 |
| Digital Filter | Programmable |
| Display Color | Red, Green, Amber |
| Display Size | 10.2 mm (0.40 in) |
| Display Type | 4 Digit, 9 Segment LED |
| Display Type Note | 4-digit, 9-segment LED, 10.2 mm (0.40") i32, i16, i16D, i8DV: 21 mm (0.83") i8: 10.2 mm (0.40") and 21 mm (0.83"), i8DH—GREEN, AMBER, and RED programmable colors for process variable, setpoint and temperatureunits |
| Electrical Connection | Sub-D Female Miniature Connector |
| Electrical Connection Note | DB-9 connector on rear panel; optional alarm 1 and 2 (programmable) |
| Form factor | 1/8 DIN |
| Frequency | 50 to 60 Hz |
| Impedance Input | 10 MΩ for 100 mV, 1 MΩ for 1 or 10 Vdc |
| Input Configuration | Single-ended |
| Input Type | RTD |
| Normal Mode Rejection | 60 dB |
| Number of Inputs | 1 |
| Offset Adjustment | -1999 to +9999 |
| Output Detail | Optional Alarm 1 and 2 (Programmable) Type: Form “C” SPDT relays Operation: High/low, above/below, (limited output to 30 Vrms only) band, latch/unlatch, normally open/normally closed and process/deviation; front panel configurations Optional Analog Output (Programmable): Non-isolated, retransmission 0 to 10 Vdc or 0 to 20 mA, 500 Ω max (output 1 only). Accuracy is ± 1% of FS when following conditions are satisfied. 1) Input is not scaled below 1% of input FS 2) Analog output is not scaled below 3% of output FS ; |
| Polarity | Unipolar |
| Reading Rate | 3 samples/sec |
| Resolution | 1°/0.1°; 10 µV process |
| Set Point Adjustment | -1999 to 9999 counts |
| Span Adjustment | 0.001 to 9999 counts, programmable |
| Step Response | 0.7 sec for 99.9% |
| Supply Voltage | 90 to 240 Vac |
| Temperature Measurement Range | RTD (Pt, 0.00385, 100, 500, 1000 Ω) : -200 to 900°C, RTD (Pt, 0.00392, 100, 500, 1000 Ω) : -200 to 850°C |
| Temperature Stability | 0.04°C/°C |
| See All Specs | |
PDFs & Manuals
Show Ratings & Reviews