Welcome to our new website, found an issue or bug? Please report it here
Back To Top
Load More Items from this family (2) ...
Load More Items from this family (2) ...
Load More Items from this family (17) ...
Load More Items from this family (59) ...
Load More Items from this family (6) ...
Load More Items from this family (7) ...
Load More Items from this family (1) ...
Load More Items from this family (19) ...
Load More Items from this family (7) ...
Load More Items from this family (3) ...
Load More Items from this family (3) ...
Load More Items from this family (1) ...
Load More Items from this family (1) ...
Specialty Conditioners
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
Added to Your Shopping Cart
D6000 Series interfaces have analog input, analog output, digital output, digital input, and communications modules. RS-485 MODBUS RTU Interface Protocol.
| Product Number | Input Type | Output Signal |
|---|---|---|
|
|
Thermocouple
|
None
|
|
|
Voltage
|
None
|
|
|
Current
|
None
|
|
|
Voltage, Current, Thermocouple
|
None
|
|
|
N/A
|
Current, Voltage
|
The HX15 Series Signal Conditioner has a remote stainless steel probe included with wall or duct mount models. 2% RH, 0.5°C accuracy. Two probe options available.
The FLSC-AMP is a low speed amplifier to 15kHz operation. 100mA current sinking output. 11-26Vdc power supply range. Metal mount housing and screw terminal hookup.
| Product Number | Output Signal |
|---|---|
|
|
Open Collector
|
D8000 Series can measure process inputs, thermocouples, and contact closures and generate current or voltage signals. USB interface communicates via MODBUS RTU.
| Product Number | Input Type | Output Signal |
|---|---|---|
|
|
Thermocouple, Voltage
|
None
|
|
|
Voltage
|
None
|
|
|
Current
|
None
|
|
|
Thermocouple
|
None
|
|
|
N/A
|
Current, Voltage
|
OM5 Series modular conditioners allow multiple modules to connect to a backplane with process outputs. TC, DC I/V, RTD, Bipolar voltage input. Single DC power supply
| Product Number | Input Range | Input Type |
|---|---|---|
|
|
1 to 5 V
|
Voltage
|
|
|
0 to 100 mV
|
Voltage
|
|
|
0 to 1200°C
|
Non-Linearized Thermocouple (Type T)
|
|
|
-100 to 400°C
|
Non-Linearized Thermocouple (Type T)
|
|
|
-100 to 300°C
|
Linearized Thermocouple (Type J)
|
D5000 Series interfaces have four channel inputs (process, thermocouple input, or thermistor) and convert to RS-232 or RS-485 digital output. ASCII format.
| Product Number | Current Measurement Range | Data Interface | Sensor Type | Voltage Measurement Range |
|---|---|---|---|---|
|
|
N/A
|
RS232C
|
N/A
|
±100 mV
|
|
|
N/A
|
RS485
|
N/A
|
±100 mV
|
|
|
N/A
|
RS232C
|
N/A
|
±1 V
|
|
|
N/A
|
RS485
|
N/A
|
±1 V
|
|
|
N/A
|
RS232C
|
N/A
|
±5 V
|
The DMD-460 Series bridge amplifiers/conditioners are AC or DC powered signal conditioning modules for strain gages, load cells and bridge-type sensors with V or mA output.
D1000-D2000 Series transmitters have universal inputs for thermocouple, RTD, voltage, current, pulse/frequency and bridge inputs. Converts to RS-232C or RS485 Interface.
| Product Number | Current Measurement Range | Data Interface | Excitation | Frequency Measurement Range | Number of Channels, Output | Temperature Measurement Range | Voltage Measurement Range |
|---|---|---|---|---|---|---|---|
|
|
N/A
|
RS232C
|
N/A
|
N/A
|
Digital: 2
|
N/A
|
±10 mV
|
|
|
N/A
|
RS485
|
N/A
|
N/A
|
Digital: 2
|
N/A
|
±10 mV
|
|
|
N/A
|
RS232C
|
N/A
|
N/A
|
Digital: 2
|
N/A
|
±100 mV
|
|
|
N/A
|
RS485
|
N/A
|
N/A
|
Digital: 2
|
N/A
|
±100 mV
|
|
|
N/A
|
RS232C
|
N/A
|
N/A
|
Digital: 2
|
N/A
|
±1 V
|
The OM5 Series are modular conditioners that allow multiple modules to connect to a backplane with process outputs. TC, DC I/V, RTD, Frequency, Potentiometer, Strain gage
| Product Number | Input Range | Input Type |
|---|---|---|
|
|
±5 V
|
Voltage
|
|
|
±30 mV @ 10 V Exc
|
Strain Gage
|
|
|
±20 mV @ 10 V Exc
|
Strain Gage
|
|
|
±5 V
|
Wideband Voltage
|
|
|
0 to 500°C
|
Linearized Thermocouple (Type K)
|
The LDX-2 is a LVDT signal conditioner is input loop powered with wide input range of 30-530 mV/V and process output. IP65 sealed, high accuracy (0.02%)
| Product Number | Output Signal |
|---|---|
|
|
Current
|
The IN-UVI is a wheatstone bridge in line amplifier with field selectable mV/V inputs and process output. IP65 stainless steel enclosure. Low thermal drift.
| Product Number | Output Signal |
|---|---|
|
|
Current, Voltage
|
HX92B Series conditioners/transmitters measure relative humidity with process output. Duct mount kit and remote probe models. Field replaceable sensor.
| Product Number | Electrical Output | Mounting Orientation | Supply Voltage |
|---|---|---|---|
|
|
4 to 20 mA
|
Wall Mount
|
9 to 30 Vdc
|
|
|
0 to 1 Vdc
|
Wall Mount
|
9 to 30 Vdc
|
|
|
0 to 5 Vdc
|
Wall Mount
|
9 to 30 Vdc
|
|
|
0 to 10 Vdc
|
Wall Mount
|
12 to 30 Vdc
|
|
|
4 to 20 mA
|
Duct Mount
|
9 to 30 Vdc
|
| Product Number | Electrical Connection | Electrical Output | Enclosure Material | Process Connection Size | Supply Voltage | Wire Gauge |
|---|---|---|---|---|---|---|
|
|
Cable
|
4 to 20 mA
|
Stainless Steel
|
N/A
|
6 to 30 Vdc
|
N/A
|
|
|
GX16 4-pin female
|
4 to 20 mA
|
Stainless Steel
|
N/A
|
6 to 30 Vdc
|
26 to 18 AWG
|
|
|
GX16 4-pin female
|
0 to 1 Vdc
|
Stainless Steel
|
N/A
|
6 to 30 Vdc
|
26 to 18 AWG
|
|
|
Cable
|
0 to 1 Vdc
|
Stainless Steel
|
N/A
|
6 to 30 Vdc
|
N/A
|
|
|
Cable
|
4 to 20 mA
|
Stainless Steel
|
1/2 in
|
6 to 30 Vdc
|
N/A
|
HX93B Series conditioners/transmitters measure temperature and relative humidity with process output options. Models with display, duct mount or wall mount probes.
| Product Number | Display Type | Electrical Output | Height | Mounting Orientation | Supply Voltage |
|---|---|---|---|---|---|
|
|
Dual 4 Digit Backlit LCD
|
4 to 20 mA
|
55.63 mm
|
Wall Mount
|
9 to 30 Vdc
|
|
|
N/A
|
4 to 20 mA
|
55.63 mm
|
Wall Mount
|
9 to 30 Vdc
|
|
|
N/A
|
0 to 1 Vdc
|
55.63 mm
|
Wall Mount
|
9 to 30 Vdc
|
|
|
N/A
|
0 to 5 Vdc
|
55.63 mm
|
Wall Mount
|
9 to 30 Vdc
|
|
|
N/A
|
0 to 10 Vdc
|
55.63 mm
|
Wall Mount
|
12 to 30 Vdc
|
HX94B Series conditioners/transmitters measure temperature and relative humidity with 4 process outputs options. SS NEMA 4 (IP65) housing. Duct or wall mount probes.
| Product Number | Electrical Connection | Electrical Output | Process Connection Size | Wire Gauge |
|---|---|---|---|---|
|
|
Cable with GX16 4-pin male
|
0 to 5 Vdc
|
N/A
|
26 to 18 AWG
|
|
|
Cable with GX16 4-pin male
|
4 to 20 mA
|
N/A
|
26 to 18 AWG
|
|
|
Cable
|
4 to 20 mA
|
N/A
|
N/A
|
|
|
Cable with GX16 4-pin male
|
0 to 1 Vdc
|
N/A
|
26 to 18 AWG
|
|
|
Cable with GX16 4-pin male
|
0 to 10 Vdc
|
N/A
|
26 to 18 AWG
|
The HX200 Series can be configured as either a dew point or relative humidity transmitter. Perfect for compressed air and dryer applications. Selectable 4-20mA or RS232 output.
| Product Number | Data Interface | Measurement Type | Mounting Orientation |
|---|---|---|---|
|
|
RS232
|
Temperature, Dew Point
|
N/A
|
|
|
N/A
|
Temperature, Dew Point
|
N/A
|
|
|
N/A
|
Temperature, Humidity
|
N/A
|
|
|
N/A
|
Temperature, Dew Point
|
Wall Mount
|
|
|
N/A
|
Temperature, Humidity
|
Wall Mount
|
The HX80 Series are precision transmitters that measure temperature, humidity, dew point, barometric, or atmospheric pressure and are available in wall, duct, or remote mount sensors
| Product Number | Electrical Output | Measurement Type | Mounting Orientation | Pressure, Min |
|---|---|---|---|---|
|
|
0 to 10 Vdc
|
Temperature, Humidity, Dew Point
|
Remote Mount
|
0 psi
|
|
|
4 to 20 mA
|
Temperature, Humidity, Dew Point
|
Remote Mount
|
0 psi
|
|
|
0 to 10 Vdc
|
Temperature, Humidity, Barometric Pressure
|
Remote Mount
|
750 mBar
|
|
|
4 to 20 mA
|
Temperature, Humidity, Barometric Pressure
|
Remote Mount
|
750 mBar
|
|
|
4 to 20 mA
|
Temperature, Humidity, Dew Point
|
Duct Mount
|
0 psi
|
The SPRTX-STCTX Series are connector transmitters for RTD's and thermocouples. The connector design converts directly to 4-20mA output. Provides open sensor indication.
| Product Number | Input Electrical Connection | Input Range | Input Type |
|---|---|---|---|
|
|
3-Prong Miniature Female Thermocouple Connector
|
-99 to 208 °C
|
RTD (Pt100)
|
|
|
3-Prong Miniature Female Thermocouple Connector
|
2 to 569 °C
|
RTD (Pt100)
|
|
|
3-Prong Standard Female Thermocouple Connector
|
-99 to 208 °C
|
RTD (Pt100)
|
|
|
3-Prong Standard Female Thermocouple Connector
|
2 to 569 °C
|
RTD (Pt100)
|
|
|
Universal Female Thermocouple Connector
|
-18 to 1093 °C
|
Thermocouple Type K
|
The IN-USBH conditioner adds digital USB output to mV/V pressure or load transducers. Free PC software for use as virtual meter, chart recorder, and datalogger.
| Product Number | Output Signal |
|---|---|
|
|
USB serial
|
The HX400 Series Conditioners have a remote probe to measure temperature and relative humidity and output single or dual channel 4-20mA outputs. Models with LCD, SSR output.
| Product Number | Measurement Type | Probe Length |
|---|---|---|
|
|
Humidity
|
200 mm
|
|
|
Humidity
|
100 mm
|
|
|
Humidity
|
73 mm
|
|
|
Temperature, Humidity
|
200 mm
|
|
|
Temperature, Humidity
|
100 mm
|
Specialty Conditioners
Specialty Conditioners ensure precision in industrial, commercial, and lab applications, contro...
[+]