Welcome to our new website, found an issue or bug? Please report it here
DRC-4710
DIN Rail Mount Bridge Input Signal Conditioners
Choose a Variant
Electrical Output
Volume discounts available
Volume Discount Schedule
| Quantity | Price each |
|---|---|
| 1-4 | C$428.64 |
| 5-9 | C$407.21 |
| 10-24 | C$398.64 |
| 25-49 | C$381.49 |
| 50-99 | C$372.92 |
| 100+ | C$364.34 |
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
Product Specs
<< See all Product Models| Brand |
 |
| Bandwidth | DC to 10 Hz |
| CMRR | 100 dB (dc) |
| Common Mode Voltage | 0 to 5V |
| Electrical Output | 0 to 10 Vdc |
| Height | 96 mm |
| Input Noise Voltage | 0.3 µV pp typ (0.1 to 10 Hz); |
| Input Range Note | Input Range: 0 to 10 mV, 0 to 20 mV, 0 to 30 mV (dip switch selectable), Input Current (One 350 Ω Bridge): 40 mA |
| Input Type | Voltage |
| Length | 42 mm |
| Linearity | ±0.01% |
| Mounting | DIN Rail Mount |
| Number of Inputs | 1 |
| Offset | Input Offset Voltage: ± 70 µV |
| Operating Temperature, Max | 55 °C |
| Operating Temperature, Min | 0 °C |
| Output Detail | Fixed Output: 10V ±1.0% |
| Output Signal | Voltage |
| Output Value | Process |
| Storage Temperature, Max | 80 °C |
| Storage Temperature, Min | -40 °C |
| Supply Power Type | DC |
| Supply Voltage | 18 to 26 Vdc |
| Temperature Coefficient | 0.05%/°C |
| Temperature Coefficient Note | Input : 0.05%/°C Input Offset Voltage Temperature Coefficient : 0.7 µV/°C BRIDGE: 0.05%/°C Output ( Total RMS gain temperature Coefficient : 0.007%/°C |
| Voltage Measurement Range | 0 to 30 mV dc |
| Voltage Output Range | 0 to 10 Vdc |
| Weight | 85 g |
| Width | 27 mm |
| Zero Setting Adjustable Range | 20% max output |
| See All Specs | |
PDFs & Manuals
Show Ratings & Reviews
Rated 5 out of
5
by
John H from
Good conditioners - work well
We have several instruments that came with Weidmuller conditioners, but they were not stable... drifted up and down over time. I replaced them with these Omega conditioners and we've had no further issues. Rock solid and work well. My only copmplaint would be that the terminal blocks are on the tiny side, and different front to back. I had to dig around to find a screwdriver small enough to fit the block.
Date published: 2016-10-20
Rated 4 out of
5
by
Anonymous from
GOOD PRODUCT
This product has been a outstanding part for us. Been using for 10 years.
Date published: 2022-03-22
Rated 1 out of
5
by
Anonymous from
Wrong Item - Hard to Return
This load cell amplifier was recommended for the 120 Ohm load cells. However, it can only drive 300 Ohm load cells. I'm working on returning it, but Omega is dragging their feet.
Date published: 2020-10-26
Rated 5 out of
5
by
gr8bgroach from
Simple, easy to use
Simple product, straightforward and easy to use. I was able to implement this product very quickly right out of the box. We consistently use them for taking load cell measurements and have never had any problems.
Date published: 2016-10-17