Welcome to our new website, found an issue or bug? Please report it here
LDX-D-AC-LVDT-Sig-Cond
DIN Rail Signal Conditioner for AC LVDT Transducers
Models In Stock
- Operates on 10 to 30 Vdc
- ±10 Vdc or 20 mA Selectable Output
- Compatible with AC LVDTs
LDX-D-AC-LVDT-Sig-Cond
From
C$
1 115.60
Models In Stock
Product Overview
- Adjustments Front-Panel Fine-Adjustment potentiometers facilitate setup
- Approvals CE
- Bandwidth 500 Hz or 1 kHz
- Electrical Connection Screw Terminal
- Electrical Output 20 mA
- Height 99 mm
- Length 111 mm
- Load Resistance Load Resistance: 100 kΩ;Output Load: 150 Ω
- Materials Green Polyamide
- Mounting DIN Rail 35 mm Standard
- Offset Output Offset: Up to 100 %
- Operating Temperature, Max 60 °C
- Operating Temperature, Min 0 °C
- Output Ripple <1 mVrms
- Output Value Process
- Storage Temperature, Max 85 °C
- Storage Temperature, Min -20 °C
- Supply Power Type DC
- Warm Up Time 15 min
- Weight 120 g
- Width 22.5 mm
The LDX-D is a DC-powered conditioning module that can accept a wide range of analog inductive transducer types owing to its wide input gain. The signal polarity, span, and offset are adjustable. Output is selectable: ± 10 Vdc voltage or ± 20 mA current. The housing is a standard DIN rail enclosure that can clip directly to a 35 mm top-hat rail (TS35 EN50022). Transducers are connected via the screw terminals on the front of the LDX-D. Internal links and front-panel fine-adjustment potentiometers facilitate setup. By linking 2 LDX-D modules, users can perform some analog arithmetic functions, such as A + B, A– B, (A + B)/2 and (A – B)/2.
SPECIFICATIONS
Power Requirement: 10 to 30 Vdc
Supply Current:
Voltage Range: 140 mA @ 10 Vdc, 60 mA @ 30 Vdc
Current Range: 160 mA @ 10 Vdc, 70 mA @ 30 Vdc
Transducer Excitation:
Primary Voltage: 3 Vrms nominal
Primary Frequency (kHz): 5-, 10- or 13-link selectable
Signal Input:
Input Range: 55 to 5000 mV
Input Load Resistance: 100 kΩ
Signal Output:
Voltage Output: Up to ± 10 Vdc
Current Output: Up to 20 mA into 150 Ω load
Output Ripple: <1 mVrms
Output Offset: Up to 100%
Temp Coefficient Gain: <0.01% FSO/°C
Temp Coefficient Offset: <0.01% FSO/°C
Warm-Up: 15 minutes recommended
Linearity: <0.1% FSO
Bandwidth (-3 dB): 500 Hz or 1 kHz, link selectable
ENVIRONMENTAL
Operating Temp: 0 to 60°C (32 to 140°F)
Storage Temp: -20 to 85°C (-4 to 185°F)
MECHANICAL
Transducer: Screw terminals
Power Supply: Screw terminals
Output Signal: Screw terminals
Weight: 120 g (4.2 oz)
Case Material: Green polyamide
SPECIFICATIONS
Power Requirement: 10 to 30 Vdc
Supply Current:
Voltage Range: 140 mA @ 10 Vdc, 60 mA @ 30 Vdc
Current Range: 160 mA @ 10 Vdc, 70 mA @ 30 Vdc
Transducer Excitation:
Primary Voltage: 3 Vrms nominal
Primary Frequency (kHz): 5-, 10- or 13-link selectable
Signal Input:
Input Range: 55 to 5000 mV
Input Load Resistance: 100 kΩ
Signal Output:
Voltage Output: Up to ± 10 Vdc
Current Output: Up to 20 mA into 150 Ω load
Output Ripple: <1 mVrms
Output Offset: Up to 100%
Temp Coefficient Gain: <0.01% FSO/°C
Temp Coefficient Offset: <0.01% FSO/°C
Warm-Up: 15 minutes recommended
Linearity: <0.1% FSO
Bandwidth (-3 dB): 500 Hz or 1 kHz, link selectable
ENVIRONMENTAL
Operating Temp: 0 to 60°C (32 to 140°F)
Storage Temp: -20 to 85°C (-4 to 185°F)
MECHANICAL
Transducer: Screw terminals
Power Supply: Screw terminals
Output Signal: Screw terminals
Weight: 120 g (4.2 oz)
Case Material: Green polyamide
