Through-Hole Compression Load Cell

The CC1 family of stainless steel, ATEX certified, load cells are primarily designed for use as polished rod (pump off control) sensors in oil and gas pumping applications.

The LCHD series are even lower profile than our LC402 series. They have ± 0.2% or better linearity and a 2 or 3 mv/V output in capacities from 10 lbf to 400,000 lbf.

The LC8200 series are ideal for measuring clamping forces and bolt loading forces. They have ± 0.5% linearity and a 2 mv/V output in capacities from 5 to 10,000 lbf.

The LC402 series are ideal for industrial weighing applications. They have ± 0.1% linearity and a 3mv/V output in capacities from 100 lbf to 750,000 lbf.

The LC8100 series are ideal for measuring clamping forces and bolt loading forces. They have ± 1.0% linearity and a 2 mv/V output in capacities from 100 to 750,000 lbf.

The LC8400 series have an extra large ID, ideal for measuring loading forces on large bolts or other suspended loads. Available in capacities from 1,000 to 200,000 lbf.

The LCHD-IS series are FM rated intrinsically safe. They have ± 0.1% linearity and a 4 to 20 mA output in capacities from 10 lbf to 400,000 lbf.

The LC321 series are low profile with a 1/4-28 UNF center, ± 2.0% linearity, and 2mv/V output in capacities from 250 lbf to 2,000 lbf. They are ideal for robotic applications.

The LC8150 series are ideal for measuring clamping forces and bolt loading forces. They have ± 0.5% linearity and a 2 mv/V output in capacities from 5 to 500 lbf.

The LC8250 series are ideal for measuring clamping forces and bolt loading forces. They have ± 0.5% linearity and a 2 mv/V output in capacities from 1,000 to 100,000 lbf.

The LC8300 series are ideal for measuring clamping forces and bolt loading forces. They have ± 0.5% linearity and a 2 mv/V output in capacities from 1,000 to 100,000 lbf.

The LCMHD metric series are even lower profile than our LC402 series. They have ± 0.2% or better linearity and a 2 or 3 mv/V output in capacities from 2.5 kgf to 7,500 kgf.