Skip to search Skip to main content Skip to navigation

MDS8EPT-330-C24-EIP-A

5.0

(1)

PLATINUM™ Series Universal Benchtop Digital Panel Meter

Click and hold to zoom

Choose a Variant

Data Interface

USB, Ethernet, RS485, RS232, Modbus RTU, Modbus ASCII USB

Display Type

6 Digit LED 4 Digit LED

See all Models See all accessories

C$1,869.33

Item# MDS8EPT-330-C24-EIP-A

Volume discounts available

Volume Discount Schedule

Quantity	Price each
1-4	C$1,869.33
5-9	C$1,775.86
10-24	C$1,682.40
25-49	C$1,588.93
50-99	C$1,495.46
100+	C$1,402.00

QTY

Added to Your Shopping Cart

In Stock

Lead Time (If not in stock): 6 weeks

+ Add to Project List

See Specs

Product Specs

<< See all Product Models

Brand
A/D Conversion	24-bit sigma delta
Accuracy	0.03 % FS
Additional Features 1	Programmable 3 Color Display
CMRR	120 dB
Configuration	Differential
Control Output	2 SPDT Relay
Data Interface	USB, Ethernet, RS485, RS232, Modbus RTU, Modbus ASCII
Data Interface Note	Ethernet: Standards Compliance IEEE 802.3 10/100 Supported Protocols: TCP/IP, ARP, HTTPGET RS232/RS485: Selectable from menu; both ASCII and Modbus protocol selectable from menu; programmable 1200 to 115.2 Kb; complete programmable setup capability; program to transmit current display, alarm status, min/ max, actual measured input value and status
Decimal Selection	0,001, 0,01, 0,1
Digital Filter	Programmable
Display Size	21 mm (.82 in)
Display Type	6 Digit LED
Display Type Note	4 or 6 digit, 9-segment LED, 21 mm (0.83") GREEN, AMBER, and RED programmable colors for process variable, set point and temperature units
Form factor	Benchtop
Frequency	50/60 Hz
Input Current	4 to 20 mA, 0 to 24 mA
Input Type	Thermocouple, RTD, Thermistor, Current, Voltage
Input Voltage	-100 to 100 mV, -1 to 1 V, -10 to 10 Vdc
Measurement Type	Temperature, Current, Voltage, Differential Voltage
Measuring Range	Process Voltage: +100 mV, ±1, +10 Vdc;Process Current: Scalable within 0 to 24 mA;;Thermocouple:;Type J: -210 to 760°C;Type K: -270 to -160°C and -160 to 1372°C;Type T: -270 to -190°C and -190 to 400°C;Type E: -270 to -220°C and -220 to 1000°C;Type R: -50 to 40°C and 40 to 1768°C;Type S: -50 to 100°C and 100 to 1768°C;Type B: 100 to 640°C and 640 to 1820°C;Type C: 0 to 2320°C;Type N: -250 to -100°C and -100 to 1300°C;Type L: -200 to 900°C;;RTD:;Pt, 0.00385, 100, 500, 1000 Ω: -200 to 900°C;Pt, 0.00392, 100, 500, 1000 Ω: -200 to 850°C;;Thermistor:;2252 Ω: -40 to 120°C;5K Ω: -30 to 140°C;10K Ω: -20 to 150°C
Number of Inputs	1
Output Detail	Optional Alarm 1 and 2 (Programmable) Type: Form “C” SPDT relays Operation: High/low, above/below, limited output to 30 Vrms, 60 Vdc max, band, latch/unlatch, normally open/ normally closed and process/deviation; front panel configurations Optional Analog Output (Programmable): Isolated, retransmission 0 to 10 Vdc or 0 to 20 mA, 500 Ω max (output 1 only). Accuracy is ± 1% of FS when following conditions are satisfied. 1) Input is not scaled below 1% of input FS 2) Analog output is not scaled below 3% of output FS
Polarity	Bipolar
RTD Input Range	100/500/1000 Ω Pt sensor, 2-, 3- or 4-wire; 0.00385 or 0.00392 curve
Resolution	Temperature :1° /0.1° ; process : 10 µV
Set Point Adjustment	Menu Configurable
Span Adjustment	0.001 to 9999 counts
Step Response	0.7 sec for 99.9%
Supply Power Type	AC
Supply Voltage	90 to 240 Vac
Temperature Stability	RTD: 0.04°C/°C ;TC@ 25°C (77°F): 0.05°C/°C ;Cold Junction Compensation Process: 50 ppm/°C
Thermal Effects	-9999 to +9999
Thermistor Input Range	2252 Ω, 5K Ω, 10K Ω
Thermocouple Type	J, K, T, E, R, S, B, C, N, L
See All Specs Show Less