CC1

Flintec CC1 Compression Load Cell with Hermetic Sealing

0.0

(0)

Models In Stock

All stainless steel construction
IP 68 environmental protection rating
Complete hermetic sealing
Traceable NIST calibration

See Product Overview

CC1

From ^C$ 922.63

Models In Stock

Shop Models

2 Variations available

See all series options below

Data Sheet

Product Overview

Calibration Option NIST
Electrical Connection Molex 1261 Series 6-Pin Female
Electrical Output 2 mV/V
Enclosure Ratings IP68
Force Type Compression
Hysteresis ≤ ± 0.05% %*RO
Input Resistance 800 ± 50 Ω
Insulation Resistance ≥ 500 MΩ
Insulation Resistance Note 500 MΩ @ 100 Vdc
Load Cell Type Through Hole
Materials 17-4 PH Stainless Steel, Glass, Stainless Steel
Non-Linearity ≤ ± 0.05% %*RO
Operating Temperature, Max 80 °C
Operating Temperature, Min -55 °C
Output Resistance 700 ± 0.5 Ω
Process Temperature, Max 65 °C
Process Temperature, Min -25 °C
Repeatability ≤ ± 0.02% %*RO
Safe Overload 200%*Emax
Supply Voltage 5 to 15 Vdc
Temperature Effect on Sensitivity ≤ ± 0.036 %*RO/°C
Temperature Effect on Zero Output ≤ ± 0.027 %*RO/°C
Through Hole Dimension 1.65 in
Wiring/Connector Table 1: (-) Excitation; 2: Not connected; 3: (-) Signal; 4: (+) Excitation; 5: Ground; 6: (+) Signal
Zero/Balance Error ≤ ± 1%*RO

The CC1 family of compression load cells are primarily designed for use as polished rod (pump off control) sensors in oil and gas pumping applications. Full stainless steel construction and hermetically sealed, the CC1 can withstand the harsh environments associated with pumping systems ensuring long term stability and fault free operation. ATEX certification is available.

Fit for Purpose:
The CC1 load cell has been pupose built for use in polished rod pumping within the oil and gas industry.Pump control systems must monitor changes in oil flow and adjust operation accordingly. This improves efficiency and avoids wear and tear. Once fitted, the CC1 provides real-time data on the stroking force, allowing the control system to maintain optimum performance. Built from the very best materials using the finest precision tools, you can be assured that the CC1 is the best in it class.

Seamless Integration:
It was important to create a versatile product, one which could easily integrate into any setup. The CC1 is designed to be compatible with most pump control system on the market and is interchangeable with many of our competitor's devices. When the time comes, it is easy to upgrade from your old load cell to our CC1 product line.

Quality by Design:
Exceptional engineering and craftsmanship are hallmarks of Flintec. As an industry leader in load cell and force sensor design, our expertise has led to an impressive portfolio of high pedigree devices servicing a wide array of industries. The CC1 product line is no exception. Robust and accurate, delivering unrivalled performance in the even most hostile environments.