1-800-663-4209 | Vos commentaires sont importants, répondez à un sondage rapide commentaires sur le site web
DRSL-LPI-2
Remises de volume disponibles
Calendrier de remise sur volume
| Quantité | Prix unitaire |
|---|---|
| 1-4 | C$309.16 |
| 5-9 | C$293.70 |
| 10-24 | C$287.52 |
| 25-49 | C$275.15 |
| 50-99 | C$268.97 |
| 100+ | C$262.79 |
Ajouté à votre panier
Configuration terminée.
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Échec de l'enregistrement des configurations, cliquez sur le bouton Configurer Recommencer
Spécifications du produit
<< Voir toutes les modèles de produits| Brand |
 |
| Accuracy | ±10 µA + 0.05 % |
| Approvals | CE, UL, RoHS |
| Bandwidth | 100 Hz |
| Calibration Temperature, Max | 28 °C |
| Calibration Temperature, Min | 20 °C |
| Conversion Rate | 1:1 |
| Current Measurement Range | 0 to 20.5 mA |
| EMC Immunity Note | Extended EMC Immunity NAMUR NE 21, A Criterion, Burst: <±1% of span |
| EMC Standard | NAMUR NE 21 |
| Electrical Output | 0 to 20 mA |
| Enclosure Ratings | IP20 |
| Height | 113 mm |
| Input Range Note | Current; Signal Conversion: 1 to 1; Functional Range: 0 to 23 mA (NAMUR NE43 compliant); Start up Current: 10 µA typical; Input Overload: 50 mA max; Input to Output Voltage Drop:1.25V + (0.015 x Vout)where Vout = Iout x Routput, typical; Input Voltage Drop:(Unit voltage drop) + Vout |
| Input Type | Current |
| Installation | Pollution degree 2 and measurement/overvoltage category II |
| Isolation | Isolation Voltage (Test): 2.5 kVac ;Isolation Voltage (Working):300 Vac |
| Length | 115 mm |
| Mounting | DIN Rail 35 mm Standard, EN 60715 |
| Noise Calibration | >60 dB |
| Number of Inputs | 2 |
| Operating Temperature, Max | 70 °C |
| Operating Temperature, Min | -25 °C |
| Output Detail | Output Load: 600Ω max Output Load Stability: <0.01% of span/100 Ω (span = 0 to 20 mA) Voltage Limit: 17.5V |
| Output Signal | Current |
| Output Value | Process |
| Power Consumption | 30 mW |
| Relative Humidity | 0 to 95% RH (non-condensing) |
| Response Time | < 5 ms |
| Response Time Note | Response Time (0 to 90%, 100 to 10%): <5 ms |
| Screw Terminal Torque | 0.5 Nm |
| Stability | Load Stability: ≤0.01% of span/100 Ω |
| Storage Temperature, Max | 85 °C |
| Storage Temperature, Min | -40 °C |
| Supply Power Type | Loop Powered |
| Temperature Coefficient | ≤±2 µA/°C |
| Voltage Loss | (Unit voltage drop) + Vout |
| Weight | 70 g |
| Width | 6.1 mm |
| Wire Gauge | 26 to 12 AWG |
| Voir toutes Spécs | |
PDF et manuels
Afficher les notes et les avis