Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
DRSL-RTD
RTD Input DIN Rail Signal Conditioners
Remises de volume disponibles
Calendrier de remise sur volume
| Quantité | Prix unitaire |
|---|---|
| 1-4 | C$201.77 |
| 5-9 | C$191.68 |
| 10-24 | C$187.65 |
| 25-49 | C$179.58 |
| 50-99 | C$175.54 |
| 100+ | C$171.50 |
Ajouté à votre panier
Configuration terminée.
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Échec de l'enregistrement des configurations, cliquez sur le bouton Configurer Recommencer
Spécifications du produit
<< Voir toutes les modèles de produits| Brand |
 |
| Accuracy | ± 0.1 % |
| Accuracy Note | Better than 0.2°C or ±0.1% of selected range |
| Approvals | CE, UL, RoHS |
| Calibration Temperature, Max | 28 °C |
| Calibration Temperature, Min | 20 °C |
| EMC Immunity Note | NAMUR NE 21, A Criterion, Burst: <±1% of span (span = selected input range) |
| EMC Standard | NAMUR NE 21 |
| Electrical Output | 4 to 20 mA |
| Enclosure Ratings | IP20 |
| Height | 113 mm |
| Input Range Note | Sensor Current, RTD: <150 µA;Sensor Cable Specifications: 50 Ωper wire or 50 nF;Effect of Sensor Cable Resistance (3 or 4-wire RTD): <0.002 Ω/Ω;Broken Sensor Detection: >800 Ω;Shorted Sensor Detection: <18 Ω |
| Input Type | RTD |
| Installation | Pollution degree 2 and measurement/overvoltage category II |
| Length | 115 mm |
| Load Resistance | Current Output : 21 mA/600Ω /12.6V max;Voltage Output:>10 kΩ min |
| Mounting | DIN Rail 35 mm Standard, EN 60715 |
| Noise Calibration | >60 dB |
| Number of Inputs | 1 |
| Operating Temperature, Max | 70 °C |
| Operating Temperature, Min | -25 °C |
| Output Detail | Current: Range Limits(NAMUR NE43 Out of Range):Below 3.8 mA or above 20.5 mA for 4 to 20 mA output; 0 mA or above 20.5 mA for 0 to 20 mA output Sensor Error Detection(Dip Switch Selectable for Enable or None): Below 3.5 mA or above 23 mA for 4 to 20 mA output; 0 mA or above 23 mA for 0 to 20 mA output Incorrect DIP-Switch Setting Identification: Below 3.5 mA or above 23 mA for 4 to 20 mA output; 0 mA or above 23 mA for 0 to 20 mA output Output Error Level: DIP switch selectable for upscale or downscale. Voltage: Range Limits (Out of Range):Range ±2.5% Sensor Error Detection (Dip Switch Selectable for Enableor None): 0V or selected range + 10% Incorrect DIP-Switch Setting Identification: 0V Output Error Level: DIP switch selectable for upscale or downscale |
| Output Signal | Current, Voltage |
| Output Value | Process |
| Power Consumption | 0.7 W, Internal - 0.65 W |
| Relative Humidity | 0 to 95% RH (non-condensing) |
| Response Time | < 30 ms |
| Response Time Note | Response Time (0 to 90%, 100 to 10%): <30 ms/300 ms (selectable, provides either fast response or signal dampening as needed) |
| Screw Terminal Torque | 0.5 Nm |
| Stability | Load Stability: ≤0.01% of span/100 Ω |
| Storage Temperature, Max | 85 °C |
| Storage Temperature, Min | -40 °C |
| Supply Power Note | 16.8 to 31.2 Vdc via connectors |
| Supply Power Type | DC |
| Supply Voltage | 16.8 to 31.2 Vdc |
| Temperature Coefficient | ≤±0.02°C/°C |
| Voltage Output Range | 0 to 10 Vdc |
| Weight | 70 g |
| Width | 6.1 mm |
| Wire Gauge | 26 to 13 AWG |
| Voir toutes Spécs | |
PDF et manuels
Afficher les notes et les avis
Rated 5 out of
5
by
Qaiser from
Excellent accuracy
I bought this to be used in a test lab where temperature accuracy is 0.1C and the DRSL has stood up to the expectation. Excellent accuracy, stability, form factor and ease of use.
Date published: 2019-05-14