Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
DR-IO-Sig-Cond-TTL-to-PLC
Mini Rail Mount Input and Output Modules
Modèles en stock
- This product line has been discontinued.
- High Density DIN Rail Mount Design
- 4000 Volt Isolation
- Logic Levels Switch High Level AC and DC Circuits
DR-IO-Sig-Cond-TTL-to-PLC
Depuis
C$
47.11
Modèles en stock
L'aperçu du produit
- Approvals CE, CSA, UL
- Height 60 mm
- Input Type Digital
- Isolation 4000 Vrms
- Length 80 mm
- Mounting DIN Rail 35 mm Standard “C” or as Top Hat
- Number of Inputs 1
- Operating Temperature, Max 70 °C
- Operating Temperature, Min -30 °C
- Storage Temperature, Max 100 °C
- Storage Temperature, Min -40 °C
- Width 7.5 mm
DR-IO Series DIN rail mount input/output modules are ideal for connecting real world discrete signals to a computer interface and other electronic equipment. Most computer interfaces can only sense or generate low level TTL (0/5Vdc) signals. The DR-IO-OAC and DR-IO-ODC output modules can be used to sense high level ac and dc signals. The compact design of the DR-IO modules permit high density mounting on a standard DIN rail. The input modules are available with negative and positive logic versions. Negative logic modules produce a high logic signal when the input signal from the field goes low and a low logic signal when the field input goes high. With the positive logic modules, the logic signal follows the field signal that is, the logic signal is high when the field signal is high and low when the field signal is low.
For complete product specifications see the Related Links section at the bottom of this page.
For complete product specifications see the Related Links section at the bottom of this page.
PDF et manuels
Afficher les notes et les avis
Rated 5 out of
5
by
Bairdf from
Low turn on current
I use these as solid state relays with the NI 9403 5V TTL DIO module. The problem I have always had is that the module only outputs 2mA per channel. These DR-IO modules let me go directly from the TTL signal to a 3A 208V powered device. If I need more than that I can used them to turn on a larger relay. The internal fuse make them a great space saver too.
Date published: 2016-02-16
Rated 5 out of
5
by
Joel Muniz from
Everything looks fine
Material arrived on time, good service and attention
Date published: 2023-10-05
Rated 5 out of
5
by
Kristina from
Quick Delivery
Fast delivery and exactly what we needed. Good quality.
Date published: 2023-05-11
Rated 1 out of
5
by
Anonymous from
output charge leak without control signal
These modules leak a low level charge without no control signal applied.
This is not noticeable with mechanical relays due to the low impedance which allows the charge to bleed without enabling the relay. However, with a sold state device with an high impedance will see a voltage on the input without a control signal applied.
Date published: 2020-10-29
Hello could you advise a fit form function relay instade of DR-IO-0DC-R0-060
Thank you for your inquiry. Please contact our DAS Department at das@omega.com regarding this request.
Date published: 2023-08-22
What is the Harmonization Code for this item?
The requested code is:8536490050
Date published: 2020-03-25
Hello, could you please tell me what the propagation delay of the OAC and ODC output modules are?
The closest rating I can give you is the max switching speed which is 10khz
Date published: 2019-12-04