Thermocouple Probes with Removable Miniature ConnectorsQD-MINI-NOT-MOLDEDQD-MINI-NOT-MOLDED
Vous ne trouvez pas le bon modèle ?
Utilisez notre configurateur personnalisé pour affiner votre produit
Configuration terminée. Veuillez ajouter au panier pour la conserver ou quitter la configuration
Échec de l'enregistrement des configurations, cliquez sur le bouton Configurer Recommencer
L'aperçu du produit
Cable Clamp
PCLM-SMP
Connector Temperature, Max
220 °C
Connector Temperature, Min
0 °C
Process Connection Size
N/A
Process Temperature, Min
0 °C
Safety Clip
SMCL
Temperature Sensor Type
Thermocouple
OMEGA's Quick Disconnect Thermocouples with Miniature Connectors are high quality, economical thermocouple probes. They feature a glass filled nylon connector which is rated for temperatures up to 220°C(425°F). The probes are available in with diameters as small as 0.25mm(0.010 inches) and as large as to 3.0mm(0.125 inches).
Probes less than 48 inches in length are shipped 'straight'. Probes equal to or greater than 48 inches in length are shipped 'coiled'. If a probe that is 48 inches or longer must ship straight, please add "-SST" to the end of the part number, and add $75.00 to the price of the probe. Maximum ship straight length is 96 inches. Additional shipping fees from carrier may also apply for non-standard length packaging.
Rated 5 out of
5 by
Rachel Castellano from
The Most Reasonably Priced Quality Thermocouples iThe Most Reasonably Priced Quality Thermocouples in the Market!
Date published: 2023-05-01
Rated 5 out of
5 by
Samir from
5 stars!High quality sensor! Fast shipping, would buy again.
Date published: 2025-01-07
Rated 5 out of
5 by
Carlsanto from
Great serviceQuick shipping, and always a quality product from Omega
Date published: 2024-12-29
Rated 5 out of
5 by
K Menard from
PerfectFast delivery of a needed part. Great quality we expect from Omega.
Date published: 2024-09-22
Rated 5 out of
5 by
EricM from
great for nitinol shape settingI use these for nitinol shape setting in a tube furnace. They allow me to monitor the temperature of my part throughout the entire process.
Date published: 2024-07-19
Rated 5 out of
5 by
Anonymous from
ThermocouplesOur order was processed in a timely manner and shipped on time.
Date published: 2024-06-20
Rated 5 out of
5 by
Picocyl from
Great Customer serviceGreat customer Service team. They provide a large array of products and are always bale to answer my many questions.
Date published: 2024-06-03
Rated 5 out of
5 by
Thermal Analysis Engineer from
Quick Disconnect t/c.These work well and have a decent working life. Easy to switch out.
How do I attach the mating connectors- I assume these are the nut and two piece cone shaped objects- to a new SCASS-062G-6 thermocouple? I pulled them off an old one, how do I reattach them to a new one?
Asked by: noneanddone
The mating connectors are the "female" flat-pin connectors, and they just "slide" right on. if you are referring to replacing the male connector of the original probe, then that just disassembles by two screws for the cap, and then two screws under the cap. Remove and then reverse procedure to put the new on one.
Answered by: dennis882
Date published: 2023-05-01
What is the time constant for the 0.032" probe in 304 stainless steel
Asked by: Nitney
Thank you for your inquiry. Unfortunately, we do not provide specific time constant for our sensors due to environmental conditions affect the time response directly. Here is the link to all the information we can provide about time response for thermocouples: https://www.omega.co.uk/temperature/z/thermocoupleresponsetime.html
Answered by: Application Engineer MC
Date published: 2023-10-03
Using the SCAXL-062G-36 to measure some cell voltage inside a Kiln at 850C, what connectors can be used inside the Kiln to extend the TC probe?
Asked by: AnnaH
Hi AnnaH,
Thank you for the inquiry. We do not offer a connector rated to 850 C. Highest rated connectors are the ceramic style (SHX and NHX) with a limit of 650 C.
Best regards,
OMEGA
Answered by: NorwalkAE_RS
Date published: 2023-08-21
Where throughout the probe is the temperature taken from? From the tip of the probe or is it an average? This is concerning a temperature measurement that may vary based on the exact point that is being measured. thanks!
Asked by: jennyscience
Thank you for your inquiry! The hot junction is where the temperature is detected, and it's located at about the first quarter-inch of the probe.
Answered by: Application Engineer CK
Date published: 2021-07-20
Do the bodies for the SCAxx-125y-6 have screws to open the body in order to replace/repair the probe?
Asked by: MWighton
Yes, you can remove the two screws on the yellow connector cap to reveal two more screws that secure the two wires from the thermocouple to the (+) and (-) terminals on the connector.
Answered by: Engineer9
Date published: 2019-12-08
I am interested in SICSS-040U thermocouples in length of 24", 30", 36", 42", and 48". When I check model options on-line, I find that only 24" and 36" lengths are available as standard. Is it possible to get the other three length of interest as custom?
Asked by: Larry 2400
Thank you for your inquiry. Yes, you can customize the probe on the website itself by clicking on the blue "Configure Now" button on the top of the webpage. If you need assistance with that, please call 1-888-826-6342 to speak to our Temperature Application Engineers.
