DRSL-RTD-LP

5,0

(1)

Non Isolated Loop Powered DIN Rail RTD Input Conditioner

Cliquez et maintenez pour zoomer

Choisissez une variante

Input Type

RTD

Voir toutes les modèles Voir tous les accessoires

C$178.28

Article# DRSL-RTD-LP

Remises de volume disponibles

Calendrier de remise sur volume

Quantité	Prix unitaire
1-4	C$178.28
5-9	C$169.37
10-24	C$165.80
25-49	C$158.67
50-99	C$155.10
100+	C$151.54

Qté

Ajouté à votre panier

En stock

Délai de livraison (si pas en stock): 24 semaines

Ajouter à la liste des projets

Voir Les Spécifications

Spécifications du produit

<< Voir toutes les modèles de produits

Brand
Accuracy	± 0.1 %
Accuracy Note	Better than 0.2°C or ±0.1% of selected range
Approvals	CE, UL, RoHS
Calibration Temperature, Max	28 °C
Calibration Temperature, Min	20 °C
EMC Immunity Note	NAMUR NE 21, A Criterion, Burst: <±1% of span (span = selected input range)
EMC Standard	NAMUR NE 21
Electrical Output	0 to 20 mA, 4 to 20 mA
Enclosure Ratings	IP20
Height	113 mm
Input Range Note	Sensor Current, RTD: <150 µA;Sensor Cable Specifications: 50Ωper wire or 50 nF;Effect of Sensor Cable Resistance (3 or 4-Wire RTD): <0.002Ω/Ω;Broken Sensor Detection: >800Ω;Shorted Sensor Detection: <18Ω;
Input Type	RTD
Installation	Pollution degree 2 and measurement/overvoltage category II
Length	115 mm
Mounting	DIN Rail 35 mm Standard, EN 60715
Noise Calibration	>60 dB
Number of Inputs	1
Operating Temperature, Max	70 °C
Operating Temperature, Min	-25 °C
Output Detail	Range Limits (NAMUR NE43Out of Range): Below 3.8 mA or above 20.5 mA Sensor Error Detection(Dip Switch Selectable for Enableor None): Below 3.5 mA or above23 mA Incorrect DIP-Switch Setting Identification: Below 3.5 mAor above 23 mA Output Error Level: DIP switch selectable for upscale or downscale Load Resistance (Ω): ≤(Vsupply -3.3)/0.023
Output Signal	Current
Output Value	Process
Power Consumption	1 W, Internal - 0.65 W
Relative Humidity	0 to 95% RH (non-condensing)
Response Time	< 30 ms
Response Time Note	Response Time (0 to 90%, 100 to 10%): <30 ms/300 ms (selectable, provides either fast response or signal dampening as needed)
Screw Terminal Torque	0.5 Nm
Stability	Load Stability: ≤0.01% of span/100 Ω
Storage Temperature, Max	85 °C
Storage Temperature, Min	-40 °C
Supply Voltage	3.3 to 35 Vdc
Temperature Coefficient	≤±0.02°C/°C
Voltage Loss	3.3 Vdc
Weight	70 g
Width	6.1 mm
Wire Code Option	2 -, 3 - , 4- Wire
Wire Gauge	26 to 13 AWG
Voir toutes Spécs Montrer moins