D'experts à experts

What is a Wheatstone Bridge? In order to measure strain with a bonded resistance strain gauge, it must be connected to an electric circuit that is capable of measuring the minute changes in resistance corresponding to strain.

Marqué comme:Apprentissage Technique, Soyez Curieux

What Are the Differences Between 2-Wire, 3-Wire, and 4-Wire RTDs? A Resistance Temperature Detector (RTD) measures temperature using a resistor with a resistance value that changes as its temperature increases or decreases. RTDs are typically manufactured in three different wiring configurations: 2-wire, 3-wire, and 4-wire. Each configuration is designed to compensate for lead wire resistance to varying degrees, impacting measurement accuracy.

Marqué comme:Info sur Produit, Soyez Curieux

Débitmètres magnétiques Un débitmètre magnétique est un compteur volumétrique qui ne comporte pas de pièces mobiles et est idéal pour les applications d’eaux usées ou de tout autre liquide souillé qui est conducteur ou à base d’eau.

Marqué comme:Info sur Produit, Soyez Curieux

Rope and Tape Heaters Rope and tape heaters are flexible heaters designed to wrap around pipes, beakers, and other round surfaces. Rope and tape heaters are very similar in that they have similar power densities and construction.

Marqué comme:Apprentissage Technique, Soyez Curieux

Introduction aux imageurs thermiques Un imageur thermique est un dispositif de mesure de température sans contact.

Marqué comme:Info sur Produit, Soyez Curieux

Let's Learn About It with Omega: The Water Hammer Effect Water hammer effect is an impact load that is the most misunderstood force known to pressure transducers today. A water hammer is created by stopping and/or starting a liquid flow suddenly.

Marqué comme:Apprentissage Technique, Soyez Curieux

Débitmètre As the name implies a Flow meter is an instrument for monitoring, measuring, or recording the rate of flow, pressure, or discharge of liquids or gasses.

Marqué comme:Info sur Produit, Soyez Curieux

How Does a Pressure Transducer Work? A pressure transducer is a device that measures the pressure of a fluid, indicating the force the fluid is exerting on surfaces in contact with it.

Marqué comme:Technical Learning, Get Curious

4-20mA Input It is extremely simple and inexpensive to measure 4-20ma signal with a device that will measure only Voltage inputs.

Marqué comme:Technical Learning, Get Curious

Digital Signal Transmission Industrial networks that transmit data using digital signals often are an integral part of a data acquisition or process control solution.

Marqué comme:Technical Learning, Get Curious

Everything you need to know about Immersion Heaters An immersion heater is a device which is installed in a tank or container to heat a liquid. The installation can be over-the-side, flanged, or threaded.

Marqué comme:Technical Learning, Get Curious

What is a Polyimide Heater? Polyimide heaters, also known as Kapton heaters, are made from Kapton, a polyimide film developed by DuPont.

Marqué comme:Technical Learning, Get Curious

What are silicone heaters used for? Silicone rubber heaters have a wide range of industrial, commercial, and military applications. These heaters are resistant to radiation, moisture, compression set, weathering, vacuum, fungus, oils, solvents, and chemical attack.

Marqué comme:Technical Learning, Get Curious

Wastewater Lift Station Surveillance and Management A wastewater lift station decided to renovate its lift station cabinets - getting a much simpler, more cost-efficient setup with remote access to transmitter data and programming.

Marqué comme:Technical Learning, Get Going

Stable and Accurate Temperature Signal Readings A number of applications require signal conditioning devices to operate in extremely harsh environments – natural gas compressors with heavy engine vibration is one example.

Marqué comme:Technical Learning, Get Going

Safe and Precise Temperature Transmission and Control Stable, safe, and high precision measurement of temperature signals in all stages of the manufacturing process is of the essence at a polysulfide plant.

Marqué comme:Technical Learning, Get Curious

Problem Solver in the Field A project of operating a brand new waste-to-energy line gave an electrical engineer the chance to work with a field mounted HART temperature transmitter like TXUN-HT for the first time.

Marqué comme:Technical Learning, Get Curious

With an Isolated Repeater/Splitter A provider of electrical solutions to a wide range of customers and other electrical contractors, from temperature and pressure measurements to providing small PLC solutions needed a solution when working with temperature and isolation.

Marqué comme:Technical Learning, Get Curious

Improved Diagnostic Information Resulted in Significant Cost Savings On a recent project the data used provided by DRST-CM to develop software modules in the DCS that provide full diagnostics, a client’s company has been able to use the data for preventive maintenance.

Marqué comme:Case Study, Get Inspired

What is a Mass Flow Meter? A thermal mass flow meter measures the flow rate of gas mass based on the convective heat transfer of a heated surface to the flowing fluid.

Marqué comme:Technical Learning, Get Curious

What is a Coriolis Flow Meter and How Does it Work? A Coriolis flow meter is a type of mass flow meter. It is designed differently and works differently than thermal or differential mass flow meters.

Marqué comme:Technical Learning, Get Curious

The International Temperature Scale of 1990 (ITS-90) President of the Comité Consultatif de Thermométrie and Vice-President of the Comité International des Poids et Mesures Division of Physics, National Research Council of Canada, Ottawa, K1A OS1 Canada

Marqué comme:Case Study, Get Curious

Principles of Infrared Thermocouples The IRt/c product line represents a dramatic breakthrough in temperature sensing technology. The IRt/c sensors are unpowered, low cost, and can measure surface temperatures of materials without touching.

Marqué comme:Technical Learning, Get Curious

Thermocouple types Thermocouples are available in different combinations of metals or calibrations. The most common are the “Base Metal” thermocouples known as Types J, K, T, E and N.

Marqué comme:Technical Learning, Get Curious

Thermocouple Response Time Time constants calculated for air at room temperature and atmospheric pressure moving with velocity of 65 feet per second for thermocouples

Marqué comme:Technical Learning, Get Curious

Thermocouples - Reference Guide OMEGACLAD® is a three-part system composed of compacted MgO insulation, thermocouple wire and metal sheath.

Marqué comme:Technical Learning, Get Curious

How to choose a Thermocouple There are different types of thermocouples and their applications may vary. An exposed thermocouple will work best when high response times are required, but an ungrounded thermocouple is better in corrosive environments

Marqué comme:Product Info, Get Curious

How to Choose Between a RTD PT100 vs Pt1000? The sensing elements in Resistance Temperature Detectors (RTD’s) can be categorized in terms of the type of metal out of which they’re made and their resistance at a benchmark temperature.

Marqué comme:Product Info, Get Curious

Types of RTDs Resistance Temperature Detectors (RTDs) available today can generally be categorized into one of two basic types of RTDs, depending on how their temperature sensing element is constructed.

Marqué comme:Product Info, Get Curious

How to Use Ferrite Cores with Instrumentation OMEGA’s thermocouple and RTD connectors with built-in nickel-zinc ferrite cores are used where it is desired to suppress electro-magnetic, interference commonly known as EMI.

Marqué comme:Apprentissage Technique, Allez de l’Avant

Pt100 Probes Probes may be terminated in a connection head, quick disconnect, terminal block, or extension wire. OMEGA’s standard terminations are pictured on product pages.

Marqué comme:Apprentissage Technique, Soyez Curieux

Resistance Elements and RTD’s Resistance elements come in many types conforming to different standards, capable of different temperature ranges, with various sizes and accuracies available.

Marqué comme:Apprentissage Technique, Soyez Curieux

What is a Voltage Divider? In order to measure a signal which varies over a range greater than the input range of an analog or digital input of a measuring device, a voltage divider can drop the voltage of the input signal to the level the analog or digital input can measure.

Marqué comme:Apprentissage Technique, Soyez Curieux

PFA Fluorocarbon Information PFA Fluorocarbon Information

Marqué comme:Apprentissage Technique, Soyez Curieux

Flow Meter Tutorial So you want to measure flow? The answer would seem to be to purchase a flowmeter.

Marqué comme:Apprentissage Technique, Soyez Curieux

Infrared Quick Help When to Use Infrared Temperature Measurement

Marqué comme:Apprentissage Technique, Soyez Curieux

Low Noise Thermocouple System A low noise thermocouple system consists of a probe, a connector and wire. Each component has distinct noise and they provide a way to reduce electrical noise

Marqué comme:Apprentissage Technique, Allez de l’Avant

Choosing the Right Temperature Transmitter for Your Application

Marqué comme:Apprentissage Technique, Soyez Curieux

Scaling Voltage & Current to Engineering Units It is very often necessary to convert a voltage, millivot or current reading into a more useful value such as PSI, GPM, LBS, etc.

Marqué comme:Apprentissage Technique, Soyez Curieux

What is the Load Cell Calibration Procedure for Weighing Applications? Inspect the load cell cables, and coil and protect any excess. The load should be equally distributed among multiple load cells of multiple load cell installations.

Marqué comme:Apprentissage Technique, Allez de l’Avant

Infrared pyrometers Pyrometer is derived from the Greek root pyro, meaning fire. The term pyrometer was originally used to denote a device capable of measuring temperatures of objects above incandescence, objects bright to the human eye.

Marqué comme:Apprentissage Technique, Soyez Curieux

Mechanical Flow meters Discussed in this chapter are various types of mechanical flow meters that measure flow using an arrangement of moving parts,

Marqué comme:Apprentissage Technique, Soyez Curieux

Differential Pressure Flow meters The calculation of fluid flow rate by reading the pressure loss across a pipe restriction is perhaps the most commonly used flow measurement technique in industrial applications

Marqué comme:Apprentissage Technique, Soyez Curieux

RF/Capacitance Level Instrumentation Capacitance level detectors are also referred to as radio frequency (RF) or admittance level sensors. They operate in the low MHz radio frequency range, measuring admittance of an alternating current (ac) circuit that varies with level.

Marqué comme:Apprentissage Technique, Soyez Curieux

Types of Flow Meters for Different Applications Measuring the flow of liquids is a critical need in many industrial plants.

Marqué comme:Apprentissage Technique, Soyez Curieux

Pressure sensor Piezoelectric presssure sensors can further be classified according to whether the crystal's electrostatic charge, its resistivity, or its resonant frequency electrostatic charge is measured.

Marqué comme:Technical Learning, Get Curious

Strain Gauge When external forces are applied to a stationary object, stress and strain are the result.

Marqué comme:Technical Learning, Get Curious

The RS-232 protocol Information being transferred between data processing equipment and peripherals is in the form of digital data which is transmitted in either a serial or parallel mode.

Marqué comme:Technical Learning, Get Curious

An Introduction to Pitot Tubes Although the pitot tube is one of the simplest flow sensors, it is used in a wide range of flow measurement applications such as air speed in racing cars and Air Force fighter jets

Marqué comme:Technical Learning, Get Curious

What is a thermography? Thermography extends the concept of point radiation thermometry to one-dimensional profiles or two-dimensional pictures of non-contact temperature data.

Marqué comme:Technical Learning, Get Curious

Strain Gage Technical Data The most universal measuring device for the electrical measurement of mechanical quantities is the strain gage.

Marqué comme:Technical Learning, Get Curious

Non-contact thermometers Historically a radiation non-contact thermometer consisted of an optical system to collect the energy emitted by the target;

Marqué comme:Technical Learning, Get Curious

Specialty Level Switches Thermal, vibrating, and optical level switches are specialty devices developed to solve specific level detection problems.

Marqué comme:Technical Learning, Get Curious

Electronic Flow meters While the flow measurement technologies discussed in this chapter--magnetic, vortex, and ultrasonic--are neither exclusively nor exhaustively electronic in nature, they do represent a logical grouping of flow measurement technologies.

Marqué comme:Technical Learning, Get Inspired

Working principle of thermocouples A typicial thermocouple is made up of two dissimilar metals joined together to form two junctions.

Marqué comme:Product Info, Get Curious

Reactive Maintenance vs. Proactive Maintenance: You’re Paying 2-5X More for Maintenance Proactive maintenance, reactive maintenance, and the many benefits of switching to proactive maintenance.

Marqué comme:Technical Learning, Get Curious

Particle Pollution & Environmental Safety Indoor air quality is the responsibility of building owners, managers and employers.

Marqué comme:Technical Learning, Get Curious

5 Reasons to Wirelessly Measure Relative Humidity Monitoring Relative Humidity in Lab can be challenging. Choose the most simple and powerful way by using wireless transmitters.

Marqué comme:Technical Learning, Get Curious

The Benefits of Implementing Predictive Maintenance Predictive maintenance can help you anticipate failure before it happens, saving money, time and making processes more efficient. Learn more about these and other advantages.

Marqué comme:Technical Learning, Get Curious

How Rutgers Food Innovation Center Used Automation to Boost Food Quality and Save Time We definitely don’t want to go back to the way we were doing it. It was too much work and didn’t pay off. –Steve Baughman, Senior Maintenance Mechanic for Rutgers Food Innovation Center

Marqué comme:Case Study, Get Inspired

OMEGA Has a Starring Role in the LSST Telescope Mirror The Large Synoptic Survey Telescope (LSST) is a new kind of optical telescope that will view a wider area of night sky than ever before possible. Once operational...

Marqué comme:Case Study, Get Curious

Turning up the heat: 12 MI thermocouple probes get tested in extreme conditions In an intense heat environment, such as in solid waste incinerators, sintering powdered metals, or gas or oil fired-furnaces, you need a thermocouple probe that can withstand extreme heat.

Marqué comme:Case Study, Get Going

Measuring pH with a Wireless Device: 3 Must-Have Features Ready to measure pH with a Wireless Device? This is what you should be looking for in a portable data logger for pH measurement.

Marqué comme:Technical Learning, Get Going

Wirelessly Monitoring Air Duct Temperature Measuring temperature inside an air duct is a common facilities maintenance task for energy conservation, particularly when office area temperatures are far from defined set-points.

Marqué comme:Apprentissage Technique, Soyez Inspiré

Sensor Theory of Operation Omega is a reliable source for pressure transducers and load cells that provide high quality data in a myriad of processes.

Marqué comme:Apprentissage Technique, Soyez Curieux

Transducteurs de pression personnalisés OMEGA a mis au point un système de transducteur modulaire qui permet aux clients de configurer facilement et rapidement un transducteur de pression répondant aux critères précis requis pour leur application.

Marqué comme:Étude de Cas, Soyez Curieux

Temperature Transmitter Scaling Methodologies Temperature transmitters are used to send a signal from a temperature sensor, such as a thermocouple or RTD, to a measurement or control device.

Marqué comme:Apprentissage Technique, Allez de l’Avant

Capteurs Sanitaires Capteur sanitaire: Un capteur sanitaire est un appareil de mesure de la température, du débit ou de la pression dans un environnement où les produits sont destinés à la consommation humaine.

Marqué comme:Info sur Produit, Soyez Curieux

Types of Relays Relays are the control switches that operate with low-powered electrical signals controlling most types of circuits.

Marqué comme:Apprentissage Technique, Soyez Curieux

Temperature Measurement in Electromagnetic Environments One of the easiest ways to measure and record temperature is with a thermocouple. Thermocouples perform reliably in most environments, tolerating temperature extremes, vibration and even ionizing radiation.

Marqué comme:Apprentissage Technique, Soyez Curieux

M12 Temperature Sensors Temperature sensors provide an input to a system (indicator, controller or other device) that is used to determine the temperature of a specific process or location.

Marqué comme:Info sur Produit, Soyez Curieux

Doppler Meters Vs Transit Time Ultrasonic Flow Meters Ultrasonic flow meters are non-intrusive devices that use acoustic vibrations to measure the flow rate of liquid...

Marqué comme:Apprentissage Technique, Soyez Curieux

Types of Load Cells Various load cell types are preferred, relative to the needs of the laboratory or operational environment.

Marqué comme:Apprentissage Technique, Soyez Curieux

Temperature Sensor Manufacturing by OMEGA™ Thermocouples, RTD's, and More Our commitment to maintaining the leading edge through research development and state-of-the art manufacturing keeps OMEGA firmly at the forefront of technology.

Marqué comme:Info sur Produit, Soyez Curieux

Bandes Chauffantes Une bande chauffante est un dispositif qui est monté sur une surface et utilisé pour chauffer la surface ou l’air (des gaz).

Marqué comme:Info sur Produit, Soyez Curieux

Étalons A calibrator is an equipment used to adjust an instrument accuracy, often associated with a specific application.

Marqué comme:Info sur Produit, Soyez Curieux

Preventing Vibration Damage to Thermocouples and RTD Sensors Challenges presented to temperature measurements in the presence of vibration

Marqué comme:Apprentissage Technique, Soyez Curieux

Mesure des températures dans un four à atmosphères oxydantes Measuring temperatures inside a furnace can present several challenges: high temperatures, temperature cycling, and hostile atmospheres exceeding the limits of many measurement devices while others have greatly reduced lifetimes and poor accuracy.

Marqué comme:Apprentissage Technique, Allez de l’Avant

Introduction à la cryogénie Il est essentiel de connaître la plage de température de l’application. Des plages de températures trop basses ou trop élevées peuvent endommager la majorité des capteurs.

Marqué comme:Info sur Produit, Soyez Curieux

Capteurs sans fil Les capteurs sans fil sont des instruments de mesure standard équipés de transmetteurs qui convertissent les signaux des instruments de contrôle de procédé en transmission radio.

Marqué comme:Info sur Produit, Soyez Curieux

Installing a Load Cell: Best Practices Each load cell installation is unique. Consult a structural engineer when your application requires very high accuracy, long-term stability, custom specifications, or when using in a varied R&D environment.

Marqué comme:Apprentissage Technique, Allez de l’Avant

Conditionnement et transmission des données du capteur de température Output signals produced by temperature measurement sensors require conditioning to convert them to a form that can be used for further processing.

Marqué comme:Apprentissage Technique, Soyez Curieux

Caractéristiques et critères de sélection des puits thermométriques Les puits thermométriques protègent les capteurs de température (thermocouples, thermistors et thermomètres bimétalliques) de la pression excessive, de la vélocité de la matière et de la corrosion.

Marqué comme:Apprentissage Technique, Soyez Curieux

Remote Monitoring Ethernet/internet-based data monitoring brings new capabilities and unprecedented access to process measurement and control.

Marqué comme:Info sur Produit, Soyez Inspiré

IC Sensors An IC Temperature Sensor is a two terminal integrated circuit temperature transducer that produces an output current proportional to absolute temperature. The sensor package is small with a low thermal mass and a fast response time

Marqué comme:Info sur Produit, Soyez Curieux

Calibrating Temperature Measurement Devices Used in Manufacturing Calibration equipment options and reasons for and against using an AS17025 calibration laboratory.

Marqué comme:Apprentissage Technique, Soyez Curieux

Cartouches chauffantes La majorité des applications ne requièrent pas le maximum en termes de watt/cm². N'utilisez qu'une densité de puissance aussi élevée que nécessaire.

Marqué comme:Info sur Produit, Soyez Curieux

Indicateurs de panneau Un indicateur à montage sur panneau est un instrument qui affiche un signal d’entrée sous une forme numérique ou analogique.

Marqué comme:Info sur Produit, Soyez Curieux

Présentation des étiquettes de température Les étiquettes de température sont des contrôleurs de température composés d’un ou plusieurs petits indicateurs thermosensibles scellés sous des fenêtres thermorésistantes transparentes.

Marqué comme:Info sur Produit, Soyez Curieux

Thermomètre Infrarouge Le modèle le plus basique consiste en un objectif qui concentre l’énergie infrarouge vers un détecteur.

Marqué comme:Info sur Produit, Soyez Curieux

What Is A Thermistor And How Does It Work? Un capteur de thermistance est un élément de détection de la température composé d'un matériau semi-conducteur fritté qui se caractérise par d'importantes variations de résistance proportionnelles à de faibles changements de température

Marqué comme:Info sur Produit, Soyez Curieux

Jauges de contraintes Jauges de contrainte (jauges) : qu’est-ce qu’une jauge de contrainte? Une jauge de contrainte est un capteur dont la résistance varie selon la force appliquée.

Marqué comme:Info sur Produit, Soyez Curieux

Présentation des réchauffeurs flexibles Un réchauffeur flexible est un dispositif capable de s’adapter à la surface à chauffer.

Marqué comme:Info sur Produit, Soyez Curieux

pH Meter A pH meter is an instrument used to measure acidity or alkalinity of a solution - also know as pH.

Marqué comme:Étude de Cas, Soyez Curieux

Introduction à la mesure de niveau Intégrés au contrôle de procédé dans de nombreuses industries, les capteurs de mesure de niveau sont divisés en deux principaux types. Les capteurs de mesure de niveau sont utilisés pour indiquer une seule hauteur de liquide discrète.

Marqué comme:Info sur Produit, Soyez Curieux

Fil à Thermocouple Un fil utilisé dans un thermocouple du point de détection au point de compensation de jonction froide (extrémité cjc) où le signal est mesuré.

Marqué comme:Info sur Produit, Soyez Curieux

Thermoplongeurs Un thermoplongeur est un dispositif qui est installé dans un réservoir ou un conteneur pour chauffer un liquide. Il peut être amovible, à bride ou à visser.

Marqué comme:Info sur Produit, Soyez Curieux

Manomètres et Interrupteurs de Pression Les manomètres et les interrupteurs de pression sont parmi les instruments les plus souvent utilisés dans les usines. Mais en raison de leur grand nombre, l’attention portée à l’entretien (et la fiabilité) peut être compromise.

Marqué comme:Info sur Produit, Soyez Curieux