1-800-663-4209 | Your feedback matters, take a quick survey Website Feedback
Back To Top
Load More Items from this family (28) ...
DIN Rail Signal Conditioners
Added to Your Shopping Cart
| Product Number | Input Type |
|---|---|
|
|
Thermocouple, RTD,Thermistor, Resistance, Potentiometer, Current, Voltage
|
The DMD4059 Series converts wheatstone strain bridge sensors, pressure transducers, or load cell signals into process current or voltage. Offered with AC or DC Power.
| Product Number | Input Type |
|---|---|
|
|
Voltage
|
|
|
Low Voltage
|
The DRSL-TC Series are isolated or non-isolated thermocouple input signal conditioners. Accepts Type J and Type K TC's. DIP switch selectable ranges, slim housing.
| Product Number | Input Type |
|---|---|
|
|
Thermocouple
|
|
|
Isolated thermocouple
|
The TXDIN70 series provide two channel transmitters or isolators with 4-20 or 0-20 mA output. Programmable input types with TXDIN70-DISPLAY accessory (sold separately)
| Product Number | Input Type | Supply Voltage | Voltage Measurement Range |
|---|---|---|---|
|
|
Thermocouple, RTD, Voltage
|
24 Vdc
|
0 to 20 mV, 0 to 60 mV, 0 to 100 mV, 0 to 1V, 0.2 to 1V
|
|
|
Thermocouple, RTD, Voltage
|
100 to 240 Vac, 24 Vdc
|
0 to 20 mV, 0 to 60 mV, 0 to 100 mV, 0 to 1V, 0.2 to 1V
|
The DRST-CM is a programming display for DRST-AC, DRST-DC, DRST-UN & DRST-UR. Supports Modbus over RS-485. Monitors process value on built in display.
| Product Number | Display Type |
|---|---|
|
|
N/A
|
The DRSL-RTD is either isolated or non-isolated with 2, 3, or 4-wire Pt100 RTD input. Pre-calibrated temp ranges selectable via DIP switch. Slim housing, high accuracy.
| Product Number | Accuracy |
|---|---|
|
|
± 0.1 %
|
|
|
± 0.05 %
|
The DRST-FR converts frequency/pulse inputs to a 4-20mA or 0-10V DC output. PNP/NPN output, relay output. Universal power supply. Configurable with TXUN-KIT device.
| Product Number | Input Type |
|---|---|
|
|
Frequency
|
The DRSL-RTD-LP is a 2, 3, or 4-wire PT100 RTD input conditioner. Output loop powered with high accuracy and slim housing. Pre-calibrated temp range DIP switch selected.
| Product Number | Input Type |
|---|---|
|
|
RTD
|
The DIN Rail DMD4380 Series converts, amplifies, filters and optically isolates mA or V input signals to process current or voltage outputs. Loop powered w/ 1200V isolation.
| Product Number | Input Type |
|---|---|
|
|
Current, Low Voltage
|
|
|
Voltage, Current
|
CCT DIN rail conditioners that accept various input signals, such as voltage and current, frequency, temperature (TC and RTD), and provide 0/4 to 20 mA, or 0 to 10 Vdc.
| Product Number | Current Measurement Range | Frequency Measurement Range | Input Type | Supply Voltage | Temperature Measurement Range | Voltage Measurement Range |
|---|---|---|---|---|---|---|
|
|
N/A
|
N/A
|
Voltage
|
110 Vac
|
N/A
|
0 to 0.1 Vdc, 0 to 1 Vdc, 0 to 10 Vdc, 0 to 100 Vdc, 0 to 650 Vdc
|
|
|
0 to 50 mA dc
|
N/A
|
Voltage, Current
|
110 Vac
|
N/A
|
18 Vdc Max
|
|
|
0 to 5 mA, 0 to 50 mA
|
N/A
|
Current
|
110 Vac
|
N/A
|
N/A
|
|
|
N/A
|
N/A
|
Voltage
|
110 Vac
|
N/A
|
0 to 2 Vdc
|
|
|
N/A
|
N/A
|
AC Voltage
|
110 Vac
|
N/A
|
0 to 1 Vac
|
The DRSL-LPI Series Conditioners are 1 or 2 channel analog input loop powered isolators. 1:1 signal ratio, low input voltage drop, slim housing.
| Product Number | Number of Inputs |
|---|---|
|
|
1
|
|
|
2
|
The DRSL-SP3 is a repeater/splitter that isolates and converts 1 bipolar process input to 2 process outputs. DIP switch selectable ranges, slim housing, high accuracy.
| Product Number | Input Type |
|---|---|
|
|
Voltage, Current
|
The DRSL-DC1-DC2 Conditioners have a DC current and voltage input and isolated and converted DC current and voltage output. DIP switch selectable range. 0.05% accuracy
The DRSL-TEMP is an output loop powered temperature signal conditioner. Accepts Type J, Type K, or 2, 3 or 4 wire Pt100 RTD input. Slim housing, high accuracy.
| Product Number | Input Type |
|---|---|
|
|
Thermocouple, RTD
|
The DRST-AC measures AC current or voltage signals and outputs passive or active current signals. UL and c-UL approved. Universal power. Programmer required.
| Product Number | Input Type |
|---|---|
|
|
AC Current , Voltage
|
The DRSL-U is a universal input conditioner that accepts thermocouple, RTD, resistance, potentiometer, voltage or current input. Configured w/ DRSL-DISPLAY programmer.
| Product Number | Input Type |
|---|---|
|
|
Thermocouple, RTD, Resistance, Potentiometer, Current, Voltage
|
The DRG-SC Series Conditioners have models with TC, RTD, Pot, Freq., AC/DC Voltage/Current, Strain/Bridge inputs and field configurable outputs from 0-5V, 0-10V, 0-20mA.
| Product Number | Input Type |
|---|---|
|
|
RTD
|
|
|
Voltage, Current (bipolar)
|
The DRSP-I Series are DC current splitters that take one 4-20mA input to two 4-20mA outputs w/ AC or DC power. Zero and span adjustments for each output, status LEDs.
The DRST-DC measures unipolar or bipolar DC current and voltage signals. Passive/active current buffered output voltage. Additional programmer required.
| Product Number | Input Type |
|---|---|
|
|
Current, Voltage, Potentiometer
|
TXDIN101 has thermocouple, RTD, and mV input with 4-20mA output. LED display, configuration TX69-CABLE sold separately required to program via PC.
| Product Number | Input Type |
|---|---|
|
|
Thermocouple, RTD, Voltage
|
DIN Rail Signal Conditioners
DIN rail signal conditioners convert input signals from thermocouples, RTDs, and more into unif...
[+]